signify 4 Inch Plaster Frame Downlighting Instruction Manual
- July 21, 2024
- signify
Table of Contents
signify 4 Inch Plaster Frame Downlighting
Product Information
Specifications
- Product Name: Downlighting Plaster Frame
- Available Apertures: 4in, 6in, 8in
- Installation Requirement: Must be performed by a qualified electrician or service personnel
- Compliance: Class A digital service, Part 15 of the FCC Rules
- Interference Protection: Designed to provide reasonable protection against harmful interference
Product Usage Instructions
- Read and understand the instructions before installing the luminaire (fixture).
- Retain the instructions for maintenance reference.
- Caution (RISK OF FIRE)
- Cutout Dimensions:
- 4in Aperture: Bar minimum span 7.25in, Bar maximum span 24.25in
- 6in Aperture: Bar minimum span 9.625in, Bar maximum span 24.25in
- To convert from round to square aperture, pry the material webbings until they detach. Use gloves and pliers.
- Plaster frame position can be locked by screws.
- For tight spacing, bars can be shortened by breaking off bar segments.
- For suspended ceilings, snap the bar ends on T-bars.
**FAQ
**
-
Q: Can I install the Downlighting Plaster Frame without professional help?
A: No, the installation and servicing must be performed by a qualified electrician or service personnel. -
Q: How do I convert the aperture from round to square?
A: Pry the material webbings until they detach. Use gloves and pliers for safety. -
Q: What should I do for tight spacing during installation?
A: Bars can be shortened by breaking off bar segments for tight spacing.
CAUTION: THE INSTALLATION AND SERVICING OF THIS PRODUCT MUST BE PERFORMED
BY A QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital service, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, many cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
CAN ICES-005 (A) / NMB-005 (A)
Read and understand these instructions before installing luminaire
(fixture)
This luminaire is intended for installation in accordance with the National
Electrical Code and local regulations. To assure full compliance with local
codes and regulations, check with your local electrical inspector before
installation.
WARNING – To prevent electrical shock, turn off electricity at fuse box
before proceeding. Allow fixture to cool before handling.
Retain these instructions for maintenance reference
ModuLyte accepts Light Engines:
- M4RDL, M6RDL & M8RDL
- C4L & C6L Flex
- P4R, P4S, P6R, & P6S Flex
Caution (RISK OF FIRE)
Use only with ModuLyte, Calculite and LyteProfile LED light engines and
reflector.
WARNING – Make sure that the power supply is disconnected before
installation.
**Cutout Dimensions
**
4in (Figure 1)
Bar minimum span 7.25in” Bar maximum span 24.25in”
6in (Figure 2)
Bar minimum span 9.625in” Bar maximum span 24.25in”
Plaster Frame
Note: Plaster frame position can be locked by screws (Figure 3).
Note: For tight spacing, bars can be shortened by braking off bar segments (Figure 4 and 5).
For suspended ceiling snap the bar ends on T-bars.
© 2024 Signify Holding. All rights reserved. The information provided herein
is subject to change, without notice. Signify does not give any representation
or warranty as to the accuracy or completeness of the information included
herein and shall not be liable for any action in reliance thereon. The
information presented in this document is not intended as any commercial offer
and does not form part of any quotation or contract, unless otherwise agreed
by Signify.
Signify North America Corporation 400 Crossing Bld, Suite 600 Bridgewater, NJ
08807
Telephone: 800-555-0050
Signify Canada Ltd. 281 Hillmount Road, Markham, ON, Canada L6C 2S3
Telephone: 800-668-9008
All trademarks are owned by Signify Holding or their respective owners.
www.lightolier.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>