ATEN UC3310 CAMLIVE MX UVC Camera Seamless Matrix User Guide
- July 20, 2024
- Aten
Table of Contents
ATEN UC3310 CAMLIVE MX UVC Camera Seamless Matrix
Specifications
- Model: UC3310 CAM LIVE MX UVC Camera Seamless Matrix
- Part No.: PAPE-1223-Z24G
- Ports: RJ-45, RS-485, USB (Type-A, Type-B, Type-C), HDMI
- Power: Power adapter
FAQ
- Q: What should I do if the unit does not power on?
- A: Ensure that the main power switch is turned on and press the power button. Check the power adapter connection and ensure it is plugged in properly.
- Q: Can I connect more than one HDMI display to the unit?
- A: No, the unit is designed to support one HDMI-enabled display at a time.
- Q: Do I need to ground the unit for regular use?
- A: Grounding the unit is recommended to prevent damage from power surges or static electricity. It is an essential step for safe operation.
Package Contents
- 1 UC3310 CAMLIVE MX UVC Camera Seamless Matrix
- 1 USB Type-A to USB Type-B cable
- 1 power adapter and power cord
- 1 user instructions
Hardware Overview
- PGM video output selection pushbuttons (HDMI / USB)
- USB audio output selection pushbuttons (mic / speakerphone)
- input selection pushbuttons
- video clone pushbutton
- power pushbutton
- main power switch
- grounding terminal
- power jack
- RJ-45 port (RS-232 control)
- terminal ports (RS-485 PTZ control)
- USB Type-B port
- HDMI out
- USB Type-A audio
- USB Type-A camera in
- USB-C camera in
Host Requirement
A computer with one of the following operating systems:
- Windows® 10 (32-bit / 64-bit) with 7th-Gen Intel Core Processor or above
- MacOS X 10.12 or later
Installation
- Ground the unit by connecting one end of a grounding wire to the grounding terminal and the other end to a suitable grounded object.
- Note: Do not omit this step. Proper grounding helps prevent damage to the unit from power surges or static electricity.
- Connect up to 3 USB sources (1 x audio and 2 x videos) to the unit’s USB Type-A and USB-C input ports.
- Connect an HDMI-enabled display to the unit’s HDMI output port.
- Connect a PC to the unit’s USB Type-B port.
- (Optional) Connect a PTZ control panel to the unit’s terminal ports via terminal block to control the camera connected to the UC3310.
- (Optional) Connect a controller (e.g., ATEN Controllers) to the unit’s RJ-45 port via Ethernet cable for control purposes.
- Connect the power adapter to the unit’s power jack.
- Switch the main power switch (rear panel) on and then press the power pushbutton (front) to power on the unit.
More Information
Support and Documentation Notice
All information, documentation, firmware, software utilities, and specifi
cations contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support: www.aten.com/support
Scan for more information
© Copyright 2024 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd.
All rights reserved. All other trademarks are the property of their respective
owners.
The terms HDMI, HDMI High-Definotion Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>