ATEN CS692 USB HD Audio and Video KVM Switch User Manual

ATEN CS692 USB HD Audio and Video KVM Switch User Manual

Compliance Statements

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with thelimits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Warning
Operation of this equipment in a residential environment could cause radio interference.
Achtung

Online Registration

Telephone Support

1-949-428-1111

Technical Support

• For international online technical support – including troubleshooting, documentation, and software updates: http://eservice.aten.com
• For North American technical support:

http://www.aten-usa.com/support
Telephone Support| 1-888-999-ATEN ext 4998
| |

Package Contents

Check to make sure that all the components are in wording order. If you encounter any problem, please contact your dealer.

The CS692 USB HD Audio/Video KVM Switch package contains the following items:

• 1 CS692 USB HD Audio/Video KVM Switch with Remote Port Selector
• 2 hotkey stickers
• 1 user manual
• 1 Quick Start Guide

Note:

• Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit or any connected devices.
• The product may be updated, with features and functions added, improved or removed since the release of this manual. For an up-to-date user manual, visit http:// aten.com/global/en/

Overview

The CS692 USB HD Audio/Video KVM Switch links two HD audio/video-enabled PCs or devices to a single USB keyboard, USB mouse, and HD audio/video display console. The CS692 Switch takes a giant step forward from prior cable KVM models in the Petite series, by offering full HD audio/video functionality, USB 2.0 peripheral sharing (via a USB hub attached to the USB mouse port), and a firmware upgrade function that allows you to keep up with latest available versions.

Another new feature of the CS692 is the implementation of a remote port selector. This means that you can now control port switching from the desktop while the switch itself can be placed in a convenient, out-of-the-way, location. Also, in addition to new hotkeys, the CS692 offers the latest mouse port-switching function – simply double-click on the scroll wheel of a USB mouse to change ports.

Furthermore, the CS692 features ATEN’s patented Video DynaSync technology, which eliminates boot-up display problems and optimizes resolution when switching between ports.

Finally, the CS692’s new Power on detection feature means that if one of the computers is powered off, switch will automatically switch to the other powered-on computer.

Featuring an unbeatable combination of HD audio/video functionality, USB 2.0 peripheral sharing convenience, gaming keyboard support, and enhanced user- friendly operations, the CS692 allows users to keep up with the latest innovations in desktop multimedia applications.

Features

• One HD audio/video console controls two USB computers
• Computer selection via remote port selector, hotkeys, and USB mouse
• Audio-enabled – full bass response provides a rich experience for 2.1 channel surround sound systems
• Independent switching of the KVM and Audio focus – one computer has the KVM focus and the other the Audio focus*
• Multiplatform support – Windows, Mac, Linux
• Compact design, built-in all-in-one cables (2 x 2 m)
• Superior video quality – up to 1920 x 1200
• Compatible with widescreen LCD monitors
• Video DynaSync – exclusive ATEN technology eliminates boot-up display problems and optimizes resolution when switching between ports
• Power on detection – if one computer is powered off, the CS692 will automatically switch to the other computer
• Supports gaming and multimedia keyboards
• Supports multifunction and wireless keyboards and mice
• Console mouse port emulation/bypass feature supports most mouse drivers and multifunction mice
• Mac keyboard support and emulation**
• USB 2.0 mouse port can be used for USB hub and USB peripheral sharing***
• Non-Powered
• Firmware upgradableNote: 1. HD audio through the monitor’s built-in speakers cannot be switched independently.

2. PC keyboard combinations emulate Mac keyboards. Mac keyboards work only with their own computers.
3. May require an additional power
4. To use the USB 2.0 mouse port as a USB hub, you must first disable mouse emulation mode. See Hotkey Summary Table , page 17 for

System Requirements

Console

• An HD audio/video monitor
• A USB keyboard and a USB mouse
• Speakers and microphone (optional)

Computers

The following equipment must be installed on each computer that is to be connected to the system:

• An HD audio/video port
• USB Type A port
• Speaker and microphone ports (optional)

Cables

The CS692’s innovative design features built-in KVM and audio cables for extra convenience. No further cables are necessary.

Operating Systems

Supported operating systems are shown in the table, below:

10

Linux| RedHat| 9.0, Fedora and higher
SuSE| 10 / 11.1 and higher
Debian| 3.1 / 4.0
Ubuntu| 7.04 / 7.10
UNIX| FreeBSD| 5.5 / 6.1 / 6.2
Novell| Netware| 6.0 / 6.5
Mac| OS 9 and higher
DOS| 6.2 and higher

Components

CS692

Remote Port Selector

corresponding port is selected and has the KVM focus.

The LED flashes to indicate that the computer attached to its corresponding port is being scanned by the Auto Scan function.

The LED is off to indicate the port is not selected.

2| console keyboard port| Your USB console keyboard plugs in here.
3| console monitor port| Your HD audio/video console monitor plugs in here.
4| console mouse port| Your USB console mouse plugs in here.
5| KVM cables| The connectors at the end of these built-in KVM cables attach to the two HD audio/video computers/devices in your CS692 installation. See the diagram on page 14 for further details.
6| console audio ports| Your console speakers* and microphone plug in here.
7| port selection pushbutton| Press the Port Selection Pushbutton to toggle the KVM and Audio focus between the two computers/devices.

If your console monitor has built-in speakers and supports audio through its HD audio/video interface, separate speakers are not needed.

Installation

1. Make sure that the power to any device that you connect to the installation has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On
2. To prevent damage to your installation from power surges or static electricity. It is important that all connected devices are properly grounded.
3. Plug your keyboard and mouse into their USB ports, located on the front of the CS692. The ports are color coded and labeled with an appropriate icon.

Note: The mouse connector is actually a USB 2.0 port, and can accept any USB compatible peripheral. You can even connect a hub to install multiple USB devices (This may require an extra power adapter).

2. Plug your monitor into the HD audio/video port, located on the front of the CS692. Power on the monitor.
3. Plug your speakers and microphone into the console audio ports, located on the front of the CS692 (Optional).

Note: If your console monitor has built-in speakers and supports audio through its HD audio/video interface, separate speakers are not needed.

4. Plug the USB, HD audio/video, and audio connectors of the KVM cables into their respective ports on the computers you are installing.
5. Power on the

Note:w By default the switch links to the first computer that is powered on.

• Make sure the computers and devices that the CS692 connects to are also properly grounded.

Installation Diagram

Installation

1. Make sure that the power to any device that you connect to the installation has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On
2. To prevent damage to your installation from power surges or static electricity. It is important that all connected devices are properly grounded.
3. Plug your keyboard and mouse into their USB ports, located on the front of the CS692. The ports are color coded and labeled with an appropriate icon.

Note: The mouse connector is actually a USB 2.0 port, and can accept any USB compatible peripheral. You can even connect a hub to install multiple USB devices (This may require an extra power adapter).

2. Plug your monitor into the HD audio/video port, located on the front of the CS692. Power on the monitor.
3. Plug your speakers and microphone into the console audio ports, located on the front of the CS692 (Optional).

Note: If your console monitor has built-in speakers and supports audio through its HD audio/video interface, separate speakers are not needed.

4. Plug the USB, HD audio/video, and audio connectors of the KVM cables into their respective ports on the computers you are installing.
5. Power on the

Note:w By default the switch links to the first computer that is powered on.

• Make sure the computers and devices that the CS692 connects to are also properly grounded.

Keyboard Emulation

Note: When using key combinations, press and release the first key (Ctrl), then press and release the activation key.

The Firmware Upgrade Utility

To upgrade the CS692’s firmware, do the following:

1. From a computer that is not part of your KVM installation, download the latest Firmware Upgrade package for the CS692 from our Internet support site (aten.com).

Disconnect the CS692 from your KVM installation. Press and hold the Remote Port Selector’s pushbutton. While you are still holding the pushbutton, connect the KVM cable’s purple USB connector to a USB port on the computer you have downloaded the Firmware Upgrade package to.

1. The CS692 now enters Firmware Upgrade Mode. The two Ports LEDs flash together to indicate that the unit is in Firmware Upgrade Mode.

Note: While the CS692 is in Firmware Upgrade Mode, normal keyboard and mouse functions are suspended. You

|

must complete the firmware upgrade or exit Firmware Upgrade Mode to regain normal control of the console.

1. Run the Firmware Upgrade Package file. The Firmware Upgrade Utility Welcome screen appears.
2. Read the License Agreement and enable to I Agree
3. Click Next to continue. The Firmware Upgrade Utility main screen All the devices capable of being upgraded by the package are listed in the Devices List panel.
4. Select your device. Its description appears in the Device Description panel. Click Next to perform the upgrade.

As the upgrade proceeds, status messages appear in the Status Messages panel, and the progress towards completion is shown in the Progress bar.

5. After the upgrade has completed, a screen appears to inform you that procedure was successful. Click Finish to close the Firmware Upgrade Utility.
6. Set up your KVM installation See Installation , page 13.

Upgrade Failed

If the Upgrade Succeeded screen doesn’t appear, it means that the upgrade failed to complete successfully, in which case you should do the following:

1. Disconnect the USB connectors on the KVM cables from the
2. Press and hold the Remote Port Selector’s While you are still holding the pushbutton, reconnect the KVM cable’s USB connectors to the computer.
3. Power on the CS692. It will now work with the factory default firmware. Follow steps 3 to 9 on page 17 again.

Troubleshooting

Power off all devices on the installation; power off the CS692; confirm all KVM cables are properly connected; power on the CS692; power on the computers.
Graphics card driver is not up-to- date.| Upgrade to the latest graphics card driver.
Mouse and/or keyboard is not responding.| Switch needs to be reset.| Power off all devices on the installation; power off the CS692; wait five seconds; power on the CS692 again.
Mouse port- switching function is not responding.| Mouse does not support this function.| This feature is only supported by USB 3-key scroll wheel mice.
Mouse emulation is disabled.| Enable mouse emulation. See Hotkey Summary Table , page 17, for details.
Cannot switch ports by pressing [Scroll Lock] twice.| Keyboard is incompatible with [Scroll Lock] invocation.| Switch to the alternate HSM invocation keys. See Alternate Entering Hotkey Mode , page 16, for details.

Specifications

Factory Default Hotkey Settings

ATEN Standard Warranty Policy
Limited Hardware Warranty

ATEN warrants its hardware in the country of purchase against flaws in materials and workmanship for a Warranty Period of two
[2] years (warranty period may vary in certain regions/countries) commencing on the date of original purchase. This warranty period includes the LCD panel of ATEN LCD KVM switches. For UPS products, the device warranty is two [2] years but battery is one [1] year. Select products are warranted for an additional year (see A+ Warranty for further details). Cables and accessories are not covered by the Standard Warranty.
What is covered by the Limited Hardware Warranty ATEN will provide a repair service, without charge, during the Warranty Period. If a product is detective, ATEN will, at its

discretion, have the option to (1) repair said product with new or repaired components, or (2) replace the entire product with an identical product or with a similar product which fulfills the same function as the defective product. Replaced products assume the warranty of the original product for the remaining period or a period of 90 days, whichever is longer. When the products or components are replaced, the replacing articles shall become customer property and the replaced articles shall become the property of ATEN.
To learn more about our warranty policies, please visit our website: http://www.aten.com/global/en/legal/policies/warranty-policy/

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>