SILVERCREST SMK 7000 B2 Mobile Air Conditioner Instruction Manual

: July 20, 2024
: SILVERCREST

Table of Contents

SILVERCREST SMK 7000 B2 Mobile Air Conditioner
Product Information
Product Usage Instructions
FAQ
Introduction
Safety Instructions
Before starting up

SILVERCREST SMK 7000 B2 Mobile Air Conditioner

SILVERCREST-SMK-7000B2-Mobile-Air-Conditioner-PRODUCT

Product Information

Specifications

Model: MOBILE AIR CONDITIONER SMK 7000 B2
Manufacturer: ROWI Germany GmbH
Intended Use: Regulate temperature, circulate, and dehumidify air in dry indoor spaces
Power Source: Electric
Remote Control: Yes

Product Usage Instructions

Introduction

Congratulations on your purchase of the mobile air conditioner.
The instruction manual is crucial for safe and proper use of the product. Please read and understand all instructions before using the device.

Intended Use

The mobile air conditioner is designed for regulating temperature, air circulation, and dehumidification in indoor spaces. Do not use the product for any other purpose not specified by the manufacturer.

Safety Instructions

Ensure to follow all safety instructions provided in the manual to prevent accidents and damage to the product.

Information about Batteries

Refer to the manual for instructions on battery installation and replacement for the remote control.

Before Starting Up

Setting Up the Unit
- Choose a stable location for the air conditioner and ensure proper ventilation around the unit.
Mounting the Hot Air Outlet Hose
- Connect the hot air outlet hose to the unit and ensure proper ventilation for hot air expulsion.
Installation of the Window Seal
- Install the window seal to prevent warm air from entering the room and maintain energy efficiency.

FAQ

Frequently Asked Questions

Q: Can I use this air conditioner for commercial purposes?
- A: No, this product is not intended for commercial use. It is designed for residential indoor spaces.
Q: How do I clean the air filter?
- A: Refer to section 7.1 in the manual for detailed instructions on cleaning the air filter.

Introduction

Congratulations for purchasing your new device.
You have selected a high-quality product. The instruction manual is an integral part of this product. It contains important information regarding safety, device handling and disposal. Familiarise yourself with all operating and safety instructions before using the product. Only use the product as described and for the areas of use specified. Please make sure to hand over all documents when handing the product over to third parties.

Intended use

This product is a mobile air conditioner that is used exclusively to regulate the temperature, circulate and dehumidify air in dry indoor spaces. Any use other than that described above or any modification of the product is not permitted and will result in damage. The manufacturer accepts no liability for damage resulting from improper use. The product is not intended for commercial use.

Scope of delivery

1 Mobile air conditioner
1 Remote control
1 Hot air outlet hose
1 Hose connection (window)
1 Hose connection (air conditioner)
2 Fixing plugs
2 1.5 V batteries (type LR03 (AAA))
1 Window fabric
1 Velcro tape
1 Instruction manual

Equipment

SILVERCREST-SMK-7000B2-Mobile-Air-Conditioner-FIG-2

Control panel
Display
Air vents
Front air outlet
Recessed handles
Rollers (pre-mounted)
Drain plug
Rear air inlet
Rear air outlet
Drain plug
Cable winder
Air filter
Hose connection (air conditioner)
Hot air outlet hose
Hose connection (window)
Velcro tape
Window fabric with zip fastener
On/Off button
SLEEP button
MODE button M (COOL / DRY / FAN)
Minus button –
Plus button +
SPEED button
TIMER button
SWING button
Temperature unit

Technical Data

Device designation: Local air conditioners
Model: Mobile air conditioner SMK 7000 B2
Rated voltage: 220-240 V~
- (alternating current)
Rated frequency: 50 Hz
Rated power: 785 W
Protection class: I
Temperature selection range: 16 °C – 31 °C
Energy efficiency class: A
Cooling capacity: 2.06 kW (7000 BTU)
Refrigerant: R290
Refrigerant: 140 g
Minimum room size (floor area): 7 m²
Maximum room volume: 30-45 m³
Dehumidification function: up to 1.5 l/hr (room 30° C / 80 % rH*)
Noise level: 65 dB (A)
Battery (remote control): 2 x AAA 1.5 V (LR03)
Weight: 21.5 kg
*Protection class: IP20 (indoor use) rH:** relative humidity

Permissible operating overpressure

Discharge: 1.8 MPa
Suction: 0.6 MPa

Maximum permissible pressure

Discharge: 3.0 MPa
Suction: 3.0 MPa
Length of mains cable: approx. 1.8 m
Length of hot air drain hose: approx. 1.5 m
Capacity of the water tank: approx. 0.5 l
Dimensions (L x W x H): approx.
- 32.9 x 31.9 x 67.8 cm

Required information on single-channel room air conditioners

Warning

Read all safety information and instructions.
If repairs are required, please contact the nearest service centre and follow the manufacturer’s instructions exclusively and precisely.
WARNING! FIRE HAZARD!

Safety Instructions

Please read all safety information and instructions.
Failure to comply with the safety instructions and precautions may result in serious injury and/or property damage.

For future reference, keep all safety instructions and precautions in a safe place!

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
Do not carelessly leave the product or packaging material lying around. Plastic films / bags, plastic parts etc. could become a dangerous toy for children.
Do not leave the product unattended during operation.

WARNING! RISK OF ELECTRIC SHOCK!

Faulty electrical installation or excessive mains voltage can lead to electric shock.
Only connect the product if the mains voltage of the socket corresponds to the specification on the rating plate.
Only connect the product to an easily accessible socket so that you can quickly disconnect the product from the mains in the event of a fault.
Do not operate the product if it has visible damage or if the mains cable or plug is defective.
If the product’s power cord is damaged, it must be replaced by the manufacturer or its after-sales service or a similarly qualified person in order to avoid hazards.
Do not open the housing, but leave the repair to specialists. Contact a specialist workshop for this purpose. Liability and warranty claims are excluded in the event of repairs carried out independently, improper connection or incorrect operation.
Only parts that correspond to the original appliance data may be used for repairs. There are electrical and mechanical parts in this product that are essential for protection against sources of danger.
Do not operate the product with an external timer or a separate remote control system.
Do not immerse the product, the power cord or the power plug in water or other liquids.
Never touch the mains plug with wet hands.
Never pull the mains plug out of the socket by the mains cable, always grasp the mains plug.
Never use the power cord as a carrying handle.
Keep the product, the mains plug and the mains cable away from open flames and hot surfaces.
Lay the mains cable so that it does not become a tripping hazard.
Do not bend the mains cable or place it over sharp edges.
Only use the product indoors. Never operate it in damp rooms or in the rain.
Never use the product near a fireplace.
Never use the product in areas where oil or water could be splashed.
Never store the product so that it can fall into a tub or sink.
Never reach for an electrical appliance if it has fallen into the water. In such a case, immediately pull the mains plug out of the socket.
Ensure that children do not insert any objects into the product.
When you are not using the product, cleaning it or if a malfunction occurs, always switch off the product and disconnect the mains plug from the socket.
All sockets must comply with the safety regulations of the respective country.

WARNING! FIRE HAZARD!

Parts of the product become hot during operation and can cause fires if not handled properly.
Never cover the product. This may cause a fire.

WARNING! RISK OF INJURY!

Improper handling of the product may result in injury.
Do not touch the hot parts of the product with bare fingers during operation. Also point out the dangers to other users!
Note that certain parts of the product may still be hot after it has been switched off.
Do not put hands, fingers or objects into the air inlets 8 or outlets 9 . Draw the attention of children in particular to this danger.
Always transport and store the product upright, never in an inclined position.
Switch off the product and disconnect the mains plug from the socket before moving the product.

CAUTION! FIRE HAZARD!

Unit is filled with propane gas R290.

WARNING! HAZARDS DUE TO REFRIGERANT!

The product contains 140 g of refrigerant gas R290, which is highly flammable and can cause health and environmental damage if not handled properly.
Note that refrigerants can be odourless.
Avoid contact with the refrigerant and do not damage the refrigerant circuit under any circumstances.
Store the product only in rooms without continuously operating ignition sources (e.g. open flames, active gas appliances, active electric heaters, etc.).
Operate the product only in adequately ventilated rooms with a floor area of at least 7 m².
The area in which the product is located must be constructed in such a way that any escaping refrigerant gas cannot accumulate.
Store the product in such a way that mechanical damage is avoided.
Repairs and maintenance work on the coolant circuit may only be carried out by specialist personnel certified for this purpose.
The refrigerant may only be charged or discharged by certified specialist personnel.
Maintenance work and repairs may only be carried out in accordance with the manufacturer’s recommendation.
The locally applicable gas ordinances must be complied with.
Ventilation openings must always be freely permeable and must not be blocked.
The product must not be drilled into or burnt.
Dispose of the product in accordance with the local ordinances of your place of residence.

CAUTION! RISK OF DAMAGE!

Improper handling of the product may result in damage to the product.
Place the product on an easily accessible, level, dry, heat-resistant and sufficiently stable work surface. Do not place the product at the edge or on the edge of the work surface.
The product is on castors. Make sure that it is always on a level surface and cannot roll away.
Avoid heat build-up by not placing the product directly against a wall or under wall cabinets or similar.
Never place the product on or near hot surfaces (hot plates, etc.).
Do not bring the mains cable into contact with hot parts.
Never expose the product to high temperature (heating etc.) or weather conditions (rain etc.).
Never pour liquid into the product.
Never immerse the product in water for cleaning and do not use a steam cleaner for cleaning. The product may otherwise be damaged.
Do not use the product if the plastic components of the product are cracked or deformed.
Replace damaged components only with suitable original spare parts.
Always transport and store the product upright and avoid tipping it over.
Always place the product at least 50 cm away from walls, curtains, furniture and other obstacles on all sides.
Operate the product in rooms with a maximum volume of 30-45 m³.
The terminals must not be short-circuited.
Do not use any objects, except those permitted by the manufacturer, to accelerate the defrosting process.
Any person working on the refrigerant circuit must hold a certificate of competence from an industry accredited body that demonstrates their competence in the safe handling of refrigerants using a procedure known in the industry.
Service work should only be carried out in accordance with the manufacturer’s instructions. If maintenance and repair work requires the assistance of other persons, the person trained in handling flammable refrigerants should supervise the work at all times.

Information about batteries

Keep out of the reach of children.

If swallowed, they may cause injuries and lead to the perforation of soft tissue and ensuing death. Severe burns may be incurred within 2 hours of intake. Consult a physician immediately.

Incorrect handling of batteries may cause fire, explosions, the leakage of hazardous substances or further hazardous situations!
Do not fling the batteries into a fire and do not subject them to high temperatures.
Neither open, deform nor short-circuit batteries as this may cause the chemicals they contain to escape.
Do not try to recharge batteries. Only batteries marked as “rechargeable” may be recharged. There is danger of explosion!
Always remove rechargeable batteries from the appliance for recharging.
Test the batteries regularly. Chemicals which leak may cause long-term damages to the appliance. Be particularly careful when handling damaged or leaking batteries.
Danger of chemical burn! Wear protective gloves.
Chemicals which leak from a battery may cause skin irritations. In case of skin contact, rinse with ample water. If the chemicals have come into contact with the eyes, always rinse them with water, do not rub them and consult a physician immediately. Neither use different battery nor rechargeable battery types nor mix old and new batteries.
Always insert batteries with the correct polarity, because otherwise the danger of bursting exists.
Remove the batteries from the appliance if you do not wish to use it for a longer period or wish to store it.
Insert the batteries using the correct polarity.
Do not allow children to replace the batteries without adult supervision.
Always select the correct size and battery type for the intended use. The information provided with the appliance for supporting the correct battery selection should be kept as a reference. Clean the battery contacts and also the equipment’s contacts before installing the battery.
Remove used batteries without delay and dispose of them in an environmentally responsible manner.
Do not dismantle batteries.
If the battery compartment cover doesn’t close properly, do not use the remote control any longer and keep it out of the reach of children.
Avoid extreme conditions and temperatures which can influence batteries / rechargeable batteries, e.g. placing them on radiators / direct insolation.

Before starting up

Remove all packaging material and transport locks from the unit. Check that the package con-tents are complete and undamaged.

Setting up the unit

For safe and fault-free operation of the unit, the installation site must meet the following requirements:

The floor must be firm, flat and horizontal. Before use, leave the unit in an upright position for 2 hours.
Minimum distances of 50 cm to the side and 50 cm to the rear must be maintained from the enclosure.
Do not place the unit in a hot, wet or very humid environment or near combustible material. The power socket must be easily accessible so that the mains plug can be easily disconnected if necessary.

Mounting the hot air outlet hose

Pull the hot air outlet hose 14 apart and screw the hose connector (window) 15 and the hose connector (air conditioner) 13 each to one end of the hot air outlet hose 14 .
Push the hose connector (air conditioner) 13 into the rail provided on the rear air outlet 9 .

Installation of the window seal

Note: Illustrations to help you can be found on the fold-out page (see Fig. 1-7).


FIG-10](https://manuals.plus/wp-content/uploads/2024/07/SILVERCREST-SMK-7000B2
-Mobile-Air-Conditioner-FIG-10.png)

  * Before starting the installation, first clean the window and window frame with soap or detergent. Make sure that the entire surface is free of dust and grease before attaching the Velcro tape to the window and window frame (see Fig. 1).
  * Measure the surfaces and cut the Velcro tape 16 to the required dimensions (see fig. 2). Then apply the Velcro tape 16 around the window frame and to the window (see fig. 3).

 **Note:** Do not stick the Velcro tape 16 to the glass surface.

  * Attach the window fabric 17 to the Velcro tape 16  (see fig. 4).
  * Open the zip of the window fabric 17 by approx. 50 cm (see fig. 5).
  * Insert the hot air outlet hose 14 of the air conditioner into the opening. Then close the zip fastener so that it closes with the hot air outlet hose 14 and holds the hot air outlet hose 14 in the opening (see fig. 6).

#### Start-up

The product has 3 different operating modes: cool-ing mode, dehumidification
mode and ventilation mode.

  * Connect the unit to a grounded, fused, freely accessible wall socket. A beep sounds.

 **Select mode**

  * After switching on, press the MODE button M 20 to switch between cooling → dehumidification → fan mode.

 **Cooling mode**

  * Press the POWER button 18 to switch the unit on.
  * Press the MODE button M 20 repeatedly until the “COOL” indicator lamp lights up. This lights up permanently during operation.
  * The display 2 now shows the preset / last set temperature.
  * You can now set the desired temperature using the plus button + 22 and minus button – 21 (temperature range: 16 °C – 31 °C).
  * Use the temperature unit 26 button to change the temperature unit from degrees Celsius to degrees Fahrenheit.
  * By pressing the SPEED button 23 you can set the desired air speed. Here you can choose between HIGH and LOW.
  * The current setting is indicated by a lit indicator lamp.
  * To switch off the unit, press the POWER on/off button 18 , the display 2 remains lit.

 **Dehumidification mode**

 **Note:** In dehumidification mode, you can remove the hot air outlet hose 14
from the appliance.

  * Press the POWER button 18 to switch the unit on.
  * Press the MODE button M 20 repeatedly until the “DRY” indicator light and “dh” on the display 2 light up. The control lamp and the display 2 light up permanently during operation.
  * The temperature cannot be set manually in this mode. The fan speed is automatically set to low (LOW) and displayed in the fan speed indicator.
  * The fan speed cannot be set manually in this mode.
  * To switch off the unit, press the POWER on/off button 18, the display 2 remains lit.

 **Ventilation mode**

 **Note:** In ventilation mode, you can remove the hot air outlet hose 14 from
the appliance.

  * Press the POWER button 18 to switch the unit on.
  * Press the MODE button M 20 repeatedly until the “FAN” indicator light and “FA” on the display 2 light up. The control lamp and the display 2 light up permanently during operation.
  * The temperature cannot be set manually in this be set manually in this mode.
  * Press the SPEED button 23 to set the desired air speed. The LED of the set air speed HIGH or LOW lights up.
  * To switch off the unit, press the POWER on/off button 18 , the display 2 remains lit.

 **Sleep mode**

 **Note:** The sleep function is only possible in cooling mode.

  * In cooling mode, press the SLEEP button 19 to switch on sleep mode.
  * The fan automatically reduces the speed.
  * Sleep mode is activated for two hours and the set temperature automatically increases by one degree per hour. The target temperature remains unchanged even after the increase of two degrees. The appliance continues to run.
  * The appliance is energy-saving and quiet.

 **Timer setting**

With the timer function, a switch-off time can be selected in hour increments
(1-24). The unit then switches off automatically.

  * Press the TIMER button 24 when the appliance is switched on. The display 2 flashes.
  * Press the plus button + 22 to increase the timer by 1 hour.
  * Press the minus button – 21 to decrease the timer by 1 hour.
  * Wait approx. 5 seconds. The entry is automatically accepted.
  * If a timer has been set that you want to cancel, press the TIMER button 24 twice. The display 2 goes out.

 **Adjust air flow**

  * You can adjust the airflow manually by moving the vents 3 at the front air outlet 4 up or down.

 **Oscillation function**

  * Press the SWING button 25 when the unit is switched on to switch the oscillation of the unit on or off.
  * If it is activated successfully, the control lamp lights up. The oscillation function causes the discharged air to be distributed from left to right.

 **Range of use of the remote control**

![SILVERCREST-SMK-7000B2-Mobile-Air-Conditioner-FIG-18](https://manuals.plus
/wp-content/uploads/2024/07/SILVERCREST-SMK-7000B2-Mobile-Air-Conditioner-
FIG-18.png)

When controlling with the remote control, please be sure to observe the range
of use of the device shown below. To ensure that the unit responds to a button
press on the remote control, make sure that the remote control is within the
range of use shown when a button is pressed. Depending on the distance to the
unit, the angle of use and radius change, resulting in the respective area of
use. The most favorable positioning of the remote control in relation to the
unit is in the centre at the height of the display 2.

 **Note**

  * If there are objects, walls or other obstacles between the unit and the remote control, the control of the unit with the remote control may be obstructed.

 **Empty water tank**

 **Note:**

  * If the room temperature is low and the humidity is high, the product may not be able to evaporate the moisture quickly enough. In this case, water collects in the water tank.
  * If the product is in dehumidification mode “dh”, it extracts moisture from the room air. Consequently, water accumulates in the water tank.
  * When the water tank is full, the “FULL” indicator light lights up and the product stops operating.

 **Follow the steps below to empty the water tank:**

  * Switch off the unit and disconnect the mains plug from the socket.
  * Remove the hose connector 13 from the rear air outlet 9 and remove the hot air outlet hose 14 from the appliance.
  * To empty the water tank, use a shallow bowl that can hold more than 0.5 l of water.
  * Rotate the drain plug 7 (as well as the inner plug underneath) out of the opening and let the water drain off.
  * Rotate the drain plug 7 (and the inner plug underneath) properly back into the opening.
  * The product can now resume operation after the mains plug has been reconnected and the hot air outlet hose 14 has been refitted.

 **Use permanent water drainage**

  * If the product is mainly operated in dehumidification mode, it is possible to let the water drain off continuously and thus empty the water tank automatically.
  * Switch off the unit and disconnect the mains plug from the socket.
  * Rotate the drain plug 10 (and the inner plug underneath) out of the opening and let the water drain off.
  * Now connect a suitable drain hose (not included in the scope of delivery) to the opening.
  * Place the open end of the drain hose in a suitable collection vessel or drain.

 **Note:** Make sure that the drain hose leads as directly as possible to the
drain without kinks or knots. In this way, the water produced during the
dehumidification process is automatically directed to the drain.

#### Protective Function

 **Overflow protection function**

When the water in the water tray exceeds the warning level, an alarm sounds
automatically and the “FULL” indicator flashes. At this point, you must move
the drain pipe connecting the machine or the water outlet to a drain pipe or
other drain area to empty the water. After the water has been emptied, the
machine automatically returns to its original state.

 **Protective function of the compressor**

  * To prolong the compressor’s life, it has a protection function with a 3-minute start delay after the compressor has been switched off.

#### Troubleshooting

 **Fault**|  **Possible cause(s)**|  **Solution**  
---|---|---  
 ****

****

****

****

The air conditioner does not work.

| No or too low voltage.| Make sure that the mains plug mains plug is inserted
in the socket. Check the fuse and replace it if necessary. Check the mains
voltage.  
Water tank is full.| Empty the water tank.  
The ambient temperature is too high or too low.| It is recommended to use the
unit at a temperature of 7 to 35 °C (44 to 95 °F).  
In cooling mode, the room temperature is lower than the set temperature.|
Change the set temperature.  
Air intake or air outlet is blocked.| Remove blockage.  
 ****

****

The product does not cool sufficiently.

| Doors and windows are not properly closed.| Close doors and windows.  
The hot air outlet hose 14 is not con- nected or is blocked.| Connect or clean
the hot air outlet hose 14 .  
The temperature setting is too high.| Adjust the temperature setting.  
The air filter 12 is dirty.| Clean or replace the air filter 12 .  
The unit is very loud.| The unit is not standing on a flat surface.| Place the
appliance on a flat and hard surface.  
The compressor does not work.| The overheating protection is activated.| Wait
3 minutes until the temperature has dropped and then restart the appliance.  
The remote control does not work.| The distance between the unit and the
remote control is too great.| Hold the remote control near the air
conditioner. Make sure that the remote control is pointed directly at the
remote control receiver.  
The remote control is not pointed at the receiver.  
Batteries are empty.| Replace batteries.  
Error code E1| Malfunction of the room temperature sensor.| Contact the
service hotline.  
Error code E2| Malfunction of the pipe temperature sensor.| Contact the
service hotline.  

#### Maintenance, Cleaning And Storage

 **RISK OF ELECTRIC SHOCK!**

  * Improper handling of the product may result in electric shock.
  * Always disconnect the mains plug when the appliance is not in use and before any cleaning or in case of malfunctions!
  * Never immerse the unit in water or other liquids.
  * Make sure that no water or other liquids get into the housing.

 **CAUTION!** RISK OF DAMAGE!

  * Improper handling of the product may result in damage to the product.
  * Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can damage the surfaces.
  * Clean the housing and the remote control with a soft, dry cloth.
  * Always store the unit in a dry place.
  * Protect the unit from direct sunlight.
  * Store the product out of reach of children.
  * Empty the water tank as described in “Chapter 4.6”.

 **Clean air filter**

  * Clean the air filter 12 every 2 weeks or when it is visibly dirty.
  * Disconnect the mains plug before cleaning.
  * Empty the water tank completely as described in “Chapter 4.6”.
  * Wipe the unit with a slightly damp cloth. Allow all parts to dry completely afterwards.
  * Loosen the screw and pull the air filter 12 out of the housing.
  * Clean it with lukewarm water (max. 40 °C) and some neutral cleaner and let it air dry completely (without direct sunlight).
  * Insert the air filter 12 into the housing and retighten the screw.

#### Disposal **  
**

The packaging is made of environmentally friendly materials that you can
dispose of at your local recycling centres.

The Triman logo is valid in France only.

This product is subject to the European Directive 2012/19/EU. Do not dispose
of the product in household waste, but via municipal collection points for
material recycling! Further information on how to dispose of the discarded
device can be obtained from your local authority or city council.

Collection points on
[www.quefairedemesdechets.fr](http://www.quefairedemesdechets.fr)

Batteries must be recycled in accordance with Directive 2006/66/EC and may not
be disposed of with domestic waste. Each consumer is legally obliged to return
all batteries/rechargeable batteries to a collection point in his
municipality/ district or to the trade. This duty serves to ensure that
batteries/rechargeable batteries can be directed to environmentally friendly
disposal. Only return batteries/ rechargeable batteries which are not charged.
Batteries must be removed from the appliance prior to disposal.

Observe the labelling of the packaging materials when separating waste; these
are marked with abbreviations (a) and numbers (b) with the following meaning:
1–7: Plastics/20–22: Paper and cardboard/ 80-98: Composites.

#### ROWI Germany GmbH Warranty

 **Dear Customer,**

This appliance has a 3-year warranty valid from the date of purchase. If this
product has any faults, you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the warranty described
below.

 **Warranty conditions**

The validity period of the warranty starts from the date of purchase. Please
keep your original receipt in a safe place. This document will be required as
proof of purchase.  
If any material or production fault occurs within three years of the date of
purchase of the product, we will either repair or replace the product for you
or refund the purchase price at our discretion. This warranty service is
dependent on you presenting the defective appliance and the proof of purchase
(receipt) and a short written description of the fault and its time of
occurrence.

If the defect is covered by the warranty, your prod-uct will either be
repaired or replaced by us. The repair or replacement of a product does not
signify the beginning of a new warranty period.

 **Warranty period and statutory claims for defects**

The warranty period is not prolonged by repairs effected under the warranty.
This also applies to replaced and repaired components. Any damage and defects
present at the time of purchase must be reported immediately after unpacking.
Repairs carried out after expiry of the warranty period shall be subject to a
fee.

 **Scope of the warranty**

This appliance has been manufactured in accord-ance with strict quality
guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The warranty does
not extend to product parts subject to normal wear and tear or fragile parts
such as switches, batteries or those made of glass.  
The warranty does not apply if the product has been damaged, improperly used
or improperly main-tained. The directions in the operating instructions for
the product regarding proper use of the product are to be strictly followed.
Uses and actions that are discouraged in the operating instructions or which
are warned against must be avoided.

This product is intended solely for private use and not for commercial
purposes. The warranty shall be deemed void in cases of misuse or improper
han-dling, use of force and modifications/repairs which have not been carried
out by one of our authorised Service centres.

 **Warranty claim procedure**

To ensure quick processing of your case, please follow the following
instructions:

  * Please have the till receipt and the item number (IAN 446359_2307) available as proof of purchase.
  * You will find the item number on the type plate on the product, on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.
  * If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
  * You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

At [www.lidl-service.com](http://www.lidl-service.com) you can download this
manual as well as many other manuals, product videos and installation
software. This QR code will take you directly to the Lidl service page ([www
.lidl-service.com](http://www.lidl-service.com)) and allow you to open your
operating instructions simply by entering the article number (IAN
446359_2307).

 **PDF ONLINE**

  * [www.lidl-service.com](http://www.lidl-service.com)

#### Service

If any problems occur during use of your ROWI Germany product, please proceed
as follows:

 **Contact us**

 ** _You can contact the service team of ROWI Germany at:_**

 **ROWI Germany GmbH**

  * Werner-von-Siemens-Str. 27
  * 76694 Forst GERMANY
  * [Lidl-services@rowi-group.com](mailto:Lidl-services@rowi-group.com)
  *  **Service-Hotline:** +800 7694 7694 (free call from a German landline)

 **Last Information Update**

 **ID No.:** SMK 7000 B2-112023-LB08-02

IAN 446359_2307

Most problems can be resolved with the skilled technical support of our
Service Team.





#### References

  * [ Group Publishing](http://group.com "Group Publishing")
  * [ de/](http://lidl-service.com "de/")
  * [ Service.com is for sale | www.brandforce.com](http://service.com "Service.com is for sale | www.brandforce.com")
  * [ de/](http://www.lidl-service.com "de/")

## Read User Manual Online (PDF format)

[Read User Manual Online (PDF format)&nbsp;&nbsp;&gt;&gt;](/pdf/630803-silvercrest-smk-7000-b2-mobile-air-conditioner-instruction-manual-pdf)

## Download This Manual (PDF format)

[Download this manual&nbsp;&nbsp;&gt;&gt;](https://manuals.plus/m/39c7f0c9f410486b6ac3f90d766a23e785b21d3aec97e6eb64567847c0b64b45_optim.pdf)