AMP25B DC Tubular Motor Owner’s Manual

AMP25B DC Tubular Motor

“`html

Specifications:

• Button Instructions
• LED light
• P1 button Lithium Battery Switch
• Lower Channel
• LCD Display
• Up
• Stop
• P2
• Down
• Higher Channel
• FCC ID: 2AU29AMP15REMV3

Product Usage Instructions:

1. Pair / Unpair Remote Control:

a. Press P1 button (about 2 sec) on the motor head until motor
jog x1 and beep x1.
b. In the next 10 secs, press and hold Stop button on the remote
control until motor jog x2 and beep x3.

2. Change Motor Direction (if necessary):

Press Up or Down button to check if the shade moves in the
desired direction.
If you need to reverse the direction, press and hold (about 2 sec)
Up and Down buttons simultaneously until motor jog x1 and beep
x1.

3. Setting the Upper and Lower Limits:

3.1 Set Upper Limit:

a. Press Up button to raise the shade, then press Stop button
when it is in the desired upper limit.
b. Press and hold (about 2 sec) Up and Stop buttons simultaneously
until motor jog x2 and beep x3.

3.2 Set Lower Limit:

a. Press Down button to lower the shade, then press Stop button
when it is in the desired lower limit.
b. Press and hold (about 2 sec) Down and Stop buttons
simultaneously until motor jog x2 and beep x3.

4. Adjust Limits:

4.1 Adjust the Upper Limit:

a. Press and hold (about 5 sec) Up and Stop buttons
simultaneously until motor jog x1 and beep x1.
b. Use Up button to raise the shade to the desired highest
position, and use Up or Down button for final adjustment if
necessary.
c. Press and hold (about 2 sec) Up and Stop buttons simultaneously
until motor jog x2 and beep x3.

4.2 Adjust the Lower Limit:

a. Press and hold (about 5 sec) Down and Stop buttons
simultaneously until motor jog x1 and beep x1.
b. Use Down button to lower the shade to the desired lowest
position, and use Up or Down button for final adjustment if
necessary.
c. Press and hold (about 2 sec) Down and Stop buttons
simultaneously until motor jog x2 and beep x3.

5. Favorite Position:

5.1 Set Favorite Position: Use Up or Down button to move the
shade to the desired Favorite position.

FAQ:

Q: What should I do if I exit the limit setting status before

finishing the limit settings?

A: The motor will take the previous existing limits if you exit
the limit setting status before finishing the settings.

Q: How do I know if the paired transmitter has passed FCC ID

certification?

A: The FCC ID certification for the paired transmitter is FCC
ID: 2AU29AMP15REMV3.

“`

IC Radiation Exposure Statement/Déclaration d’exposition aux radiations: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Button Instructions

LED light

P1 button Lithium Battery Switch

Lower Channel

LCD Display

Up

Stop

P2

Down

Higher Channel

The paired transmitter has passed FCC ID certification, FCC ID:2AU29AMP15REMV3

!

Essential Settings
The steps in factory mode must be completed to ensure proper operation.

P2 Switch

1. Pair / Unpair Remote Control

a. Press “P1” button (about 2 sec) on

Action on

a.

the motor head until motor jog x1 and

Motor

beep x1.

b. In the next 10 secs, press and hold “Stop” button on the remote control until Motor Response
motor jog x2 and beep x3.

Action on

b.

Remote Control

• Repeat the same procedure to unpair remote control.

Motor Response

P1
Jog x1 Beep x1
Stop Jog x2 Beep x3

2. Change Motor Direction (if necessary)

Press “Up” or “Down” button to check if the shade moves in the desired direction.

If you need to reverse the direction, press and hold (about 2 sec) “Up” and “Down” buttons simultaneously until motor jog x1 and beep x1.

Action on Remote Control

Motor Response
*The operation is only valid when there are no limits. If the motor has already set the upper and lower limit, then you can only switch direction by pressing P1 button (See P1 button instructions).

Up

Down

Jog x1

Beep x1

3. Setting the Upper and Lower Limits

3.1 Set Upper Limit

Action on

a.

Remote Control

a. Press “Up” button to raise the shade,

Up

then press “Stop” button when it is in the

desired upper limit.

Motor Response

b. Press and hold (about 2 sec) “Up” and “Stop” buttons simultaneously until motor jog x2 and beep x3.

b. Up

• Stop

Jog x2

Beep x3

3.2 Set Lower Limit
a. Press “Down” button to lower the shade, then press “Stop” button when it is in the desired lower limit.
b. Press and hold (about 2 sec)”Down” and “Stop” buttons simultaneously until motor jog x2 and beep x3.

Action on

a.

Remote Control

Down

Motor Response

b.

Down

Stop

Jog x2

Beep x3

*If you exit the limit setting status before you finish the limit settings, the motor will take the previous existing limits.

Factory Mode Complete User Mode Begins

4. Adjust Limits
4.1 Adjust the Upper Limit
a. Press and hold (about 5 sec) “Up” and “Stop” buttons simultaneously until motor jog x1 and beep x1.
b. Use “Up” button to raise the shade to the desired highest position, and use “Up” or “Down” button to do the final adjustment if necessary.
c. Press and hold (about 2 sec) “Up” and “Stop” buttons simultaneously until motor jog x2 and beep x3.

Action on

a.

Remote Control

Motor Response

Action on

c.

Remote Control

Motor Response

Up

Stop

Jog x1

Beep x1

Up

Stop

Jog x2

Beep x3

4.2 Adjust the Lower Limit
a. Press and hold (about 5 sec) “Down” and “Stop” buttons simultaneously until motor jog x1 and beep x1.
b. Use “Down” button to lower the shade to the desired lowest position, and use “Up” or “Down” button to do the final adjustment if necessary.
c. Press and hold (about 2 sec) “Down” and “Stop” buttons simultaneously until motor jog x2 and beep x3.

Action on

a.

Remote Control

Down

Stop

Motor Response

Jog x1

Beep x1

Action on

c.

Remote Control

Down

Stop

Motor Response

Jog x2

Beep x3

b. Up
b. Down

5. Favorite Position

5.1 Set Favorite Position
a. Use “Up” or “Down” button to move the shade to desired Favorite position.
b. Press one “P2” button on the back of remote control until motor jog x1 and beep x1.
c. Press and hold (about 2 sec) “Stop” button until motor jog x1 and beep x1.
d. Once more, press and hold (about 2 sec) “Stop” button until motor jog x2 and beep x3.

Action on

a.

Remote Control

Motor Response

Action on

c.

Remote Control

b. P2

or

Up

Down

or

d.

Stop

Stop

Jog x1 Beep x1

Motor Response

Jog x1 Beep x1

Jog x2 Beep x3

5.2 Send Shade to Favorite Position Action on

Press and hold (about 2 sec) “Stop”

Remote Control

Stop

button, motor will move to Favorite

position.

Shade Response

or

5.3 Delete Favorite Position
a. Press one “P2” button until motor jog and beep x1.
b. Press and hold (about 2 sec) “Stop” button until motor jog and beep x1.
c. Once more, press and hold (about 2 sec) “Stop” button until motor jog x1 and long beep x1.

Action on

a.

Remote Control

Motor Response

Action on

c.

Remote Control

Motor Response

P2

b.

Jog x1 Beep x1

Stop

Jog x1

Beep x1

6. Roller Mode and Sheer Mode

6.1 Roller Shade Mode – continue movement after a short press Default Mode
a. Press and hold (about 5 sec) “Up” and “Down” buttons simultaneously until motor jog x1.
b. Press and hold (about 2 sec) “Stop” button until motor jog x2 and beep x3.

Action on

a.

Remote Control

Motor Response

Action on

b.

Remote Control

Motor Response

Up

Down

Jog x1

Stop

Jog x2

Beep x3

Stop
Jog x1 Beep x1

6.2 Sheer Shade Mode – jog movement after a short press (continue movement after a long press)
a. Press and hold (about 5 sec) “Up” and “Down” buttons simultaneously until motor jog x1.
b. Press and hold (about 2 sec) “Stop” button until motor jog x1 and beep x1.

Action on

a.

Remote Control

Up

Motor Response

• Down
  Jog x1

Action on

b.

Remote Control

Motor Response

Stop

Jog x1

Beep x1

7. Add or Remove Additional Remote

7.1 Using Current Remote Control
a. On the current remote control, press one “P2” button until motor jog x1 and beep x1.
b. Once more, on the current remote control, press one “P2” button until motor jog x1 and beep x1.
c. On the New remote control, press one “P2” button until motor jog x2 and beep x3.

Action on

a. Current Remote Control

Remote Control

P2

Motor Response

Jog x1 Beep x1

Action on

c. New Remote Control

Remote Control

P2

b. Current Remote Control
P2
Jog x1 Beep x1

*Repeat the same procedure to remove additional remote control.

Motor Response

Jog x2 Beep x3

7.2 New Remote Control
Follow instructions under the section 1. Pair / Unpair Remote Control

8. Adjust Motor Speed

8.1 Acceleration Speed
a. Press one “P2” button until motor jog x1 and beep x1.
b. Press “Up” button until motor jog x1 and beep x1.
c. Once more, press “Up” button until motor jog x2 and beep x1.

Action on

a. P2

Remote Control

b. Up

Motor Response

Action on

c.

Remote Control

Jog x1 Beep x1
Up

Jog x1 Beep x1

Motor Response

Jog x2 Beep x1

8.2 Deceleration Speed
a. Press one “P2” button until motor jog x1 and beep x1.
b. Press “Down” button until motor jog x1 and beep x1.
c. Once more, press “Down” button until motor jog x2 and beep x1.

Action on

a.

Remote Control

Motor Response

Action on

c.

Remote Control

P2
Jog x1 Beep x1 Down

b. Down
Jog x1 Beep x1

*If the motor has no response, it already has a Maximum or Minimum speed.

Motor Response

Jog x2 Beep x1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>