Kanlux NEDIA E14 LED Floodlight Stato N User Manual
- June 11, 2024
- Kanlux
Table of Contents
NEDIA E14 LED Floodlight Stato N
User Manualwww.kanlux.com
NEDIA E14 LED Floodlight Stato N
INTENDED USE/APPLICATION
Product designed to be used in the home and for other similar general
applications.
MOUNTING
Mounting should be performed by an appropriately qualified person. Check for
proper mechanical fastening and connection to electrical power prior to first
use. Technical changes reserved. Read the manual before mounting. Any
activities to be done with disconnected power supply. Exercise particular
caution. The product can be connected to a supply network which meets energy
quality standards as prescribed by law. Do not exceed the maximum load power:
see pictures.
FUNCTIONAL CHARACTERITICS
Product for indoor use. Energy efficient light sources can be used in this
product.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be done when the product is disconnected from power
supply. Clean only with soft and dry cloths.
Do not use chemical detergents. Do not cover the product. Product may heat up
to a higher temperature. Adjustment of lighting direction and/or replacement
of the light source must be done when the product has cooled down.
Replacement of light source to be performed after the product cools down: see
pictures. Product can only be supplied by rated voltage or voltage within the
range provided. Light sources with parameters provided in the manual must be
used in the product. If the cord isolation or casing is damaged, the product
cannot be used. Product must not be used in unfavourable conditions, e.g.
dust, water, moisture, vibrations, explosive air atmosphere, fumes, or
chemical fumes, etc.
EXPLANATIONS OF SYMBOLS USED
P1: Rated voltage, frequency.
P2: Maximum power.
P3: Base/holder.
P4: Class II. A product in which protection against electric shock is provided
not only through basic insulation, but also double or reinforced insulation.
P5: Protection against solid foreign objects bigger than 12mm provided.
P6: Product meets the requirements of EU directives.
P7: Use only indoors.
P8: The symbol describes the minimal distance of a light fixture (its light
source) from the spots and objects that it’s illuminating.
P9: Certificate of Conformity confirming the quality of production in accordance
with approved standards on the territory of the Customs Union.
P10: LED lamp.
P11: The product is compliant with all relevant United Kingdom regulations.
P12: The product meets the requirements of technical regulations applicable in
Ukraine.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
P13: This labelling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labelled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health, and require a
special form of recycling/ neutralising. Information on collection centres is
provided by local authorities or sellers of such goods. Used items can also be
returned to the seller when new product is purchased, in quantity no larger
than the purchased item of the same type.
COMMENTS/GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical
shock, physical injury and other material and non-material damage. For more
information about Kanlux products visit
www.kanlux.com. Kanlux SA shall not be responsible
for any damage resulting from the failure to follow these instructions. Kanlux
SA reserves the right to make changes in the manual – the current version can
be downloaded at www.kanlux.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>