Yealink WPP20 MTouch II Touch Control Panel User Guide
- May 15, 2024
- Yealink
Table of Contents
Touch Panel
MTouch Ⅱ
Quick Start Guide (V1.1)
Package Contents
| MTouch Ⅱ
---|---
| 7.5m Ethernet Cable
| USB Tpye-C Cable (with an HDMI adapter)
| Mounting Bracket and Accessories
| Screwdriver
| Quick Start Guide
MTouch Ⅱ Connection
Connect your MTouchⅡ
Assemble your MTouchⅡ
MTouch Ⅱ Installation
-
Put on a table
You can place the system on the conference room table and adjust the touch screen as you need.
-
Mount on a Wall
Hardware Interface Instructions
| No. | Port | Description |
|---|---|---|
| ① | 3.5mm Headset | Connect to a headset. |
| ② | USB-A Port | Connect to the WPP20 to pair with WPP20 for wireless sharing. |
| ③ | USB-C Port | Connect to the PC for wired sharing. |
| ④ | USB-A Port | Connect to a USB audio device, such as CP900. |
| ⑤ | VCH Port | Connect to the MCore, and the MTouch Ⅱ is powered by the MCore. |
| ⑥ | Human Motion Sensor | The motion detection sensor, integrated in the front |
of the device, is used to automatically wake up the Yealink MVC system and light up the touch screen when you approach the touch screen.
Wireless Presentation
You can use Yealink WPP20 wireless presentation pod for wireless content
sharing.
Procedure
- Connect the WPP20 to the USB port of the MTouch Ⅱ .
- Wait for about 3 seconds, and the WPP20 LED indicator glows green. The WPP20 is paired with the MTouch Ⅱ successfully.
- Connect the WPP20 to the PC.
- If the WPP20 is first connected to the computer, you need to manually start the Yealink Wireless Presentation Pod software from This PC in Windows 10 or from My Computer in Windows 7 and then upgrade the WPP20.
After starting the software, if it prompts that the firmware is different from the host version, you need to upgrade the WPP20 according to the prompts.
For the WPP20 running older versions, after starting the software, you need to manually upgrade the firmware on the software at the path of ->Version Update.
After the upgrade is successful, the WPP20 is ready for content sharing.
Go to Yealink website(http://support.yealink.com) for the latest version of the firmware.
LED Indicator Instructions
- LED Indicator of Working Status
LED Status| Description
---|---
Solid yellow| MTouch Ⅱ is not connected to a PC or you do not use WPP20 for content sharing.
Solid green| MTouch Ⅱ is connected to a PC for wired sharing or you use WPP20 for wireless sharing.
Solid red| MTouch Ⅱ is in sleep mode.
Fast-flashing yellow| MTouch Ⅱ is upgrading firmware.
Slow-flashing red| Failed to upgrade firmware. - Wi-Fi AP LED Indicator
| LED Status | Description |
|---|---|
| Solid green | The WPP20 has been paired with the MTouch Ⅱ and is connected to |
a PC for content sharing.
Solid yellow| The WPP20 is not connected to the MTouch Ⅱ
Solid red| MTouch Ⅱ is in sleep mode.
Regulatory Notices
Operating Ambient Temperatures
- Operating temperature: +32 to 104°F (0 to 40°C)
- Relative humidity: 5% to 90%, noncondensing
- Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in
accordance with the operating instructions and the system environment.
We are not liable for damage or loss resulting from the use of this product,
or for any claim from a third party. We are not liable for problems with
Yealink device arising from the use of this product; we are not liable for
financial damages, lost profits, claims from third parties, etc., arising from
the use of this product.
Explanation of the symbols
- DC symbol is the DC voltage symbol.
- WEEE Warning symbol
To avoid the potential effects on the environment and human health as a result
of the presence of hazardous substances in electrical and electronic
equipment, end users of electrical and electronic equipment should understand
the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as
unsorted municipal waste and have to collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting
support@yealink.com.
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
- Before you install and use the device, read the safety instructions carefully and observe the situation during operation.
- During the process of storage, transportation, and operation, please always keep the device dry and clean, avoid collision and crash.
- Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair.
- Please refer to the relevant laws and statutes while using the device.
- Legal rights of others should be respected as well.
Environmental Requirements
- Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
- Keep the device dry and free of dusts.
- Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made materials.
- Keep the device away from any heat source or bare fire, such as a candle or an electric heater.
Operating Requirements
- Do not let a child operate the device without guidance.
- Do not let a child play with the device or any accessory in case of accidental swallowing.
- Please use the accessories provided or authorized by the manufacturer only.
- The power supply of the device shall meet the requirements of the input voltage of the device. Please use the provided surge protection power socket only.
- Before plugging or unplugging any cable, make sure that your hands are completely dry.
- Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool.
- During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.
- If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug.
- When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately.
- Contact the specified maintenance center for repair.
- Do not insert any object into equipment slots that is not part of the product or auxiliary product.
- Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables.
Cleaning Requirements
- Before cleaning the device, disconnect it from the power supply.
- Use a piece of soft, dry and anti-static cloth to clean the device.
- Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to device other than Yealink device.
There is a bad connection with the plug.
- Clean the plug with a dry cloth.
- Connect it to another wall outlet.
The usage environment is out of operating temperature range.
- Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
- You may have connected a wrong Yealink device.
- Use the correct power supply.
Some dust, etc., may be in the port.
- Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and (2) this device must accept
any interference, including interference that may cause undesired operation of
the device. CAN ICES-3(B)
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City,
Fujian, P.R. C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The
Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
About Yealink
Yealink is a global leading provider of enterprise communication and
collaboration solutions, offering video conferencing service to worldwide
enterprises. Focusing on research and development, Yealink also insists on
innovation and creation. With the outstanding technical patents of cloud
computing, audio, video and image processing technology, Yealink has built up
a panoramic collaboration solution of audio and video conferencing by merging
its cloud services with a series of endpoints products. As one of the best
providers in more than 140 countries and regions including the US, the UK and
Australia,
Yealink ranks No.1 in the global market share of SIP phones shipments.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware,
guides, FAQ, Product documents, and more. For better service, we sincerely
recommend you to use Yealink Ticketing system (https://ticket.yealink.com)
to submit all your technical issues.
Web:www.yealink.com
Copyright©2020 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD.All rights reserved.
Documents / Resources
|
Yealink WPP20 MTouch II Touch Control
Panel
[pdf] User Guide
WPP20 MTouch II Touch Control Panel, WPP20, MTouch II Touch Control Panel,
Touch Control Panel, Control Panel
---|---
References
- Yealink Support
- Yealink Support
- Yealink | UC & C Terminal, Video Collaboration, Conference Phone, IP Phone, Headsets & Video Conferencing
- Yealink Ticket
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>