Gelielim RX-733BT AM FM Retro Radio Instruction Manual

Gelielim RX-733BT AM FM Retro Radio

Product Information

Specifications

• Frequency Range: AM: 530-1710KHz, FM: 88-108MHz, SW: 5.9-18.0Hz
• Power Supply: DC 3.7V (18650X1)
• Battery Capacity: 1200mAH
• Maximum Output Power: 3.6W
• Speaker Output Power: 5W
• USB/TF/BT Playback Format: MP3, WMA, WAV

Product Usage Instructions

Part & Controls

1. VOLUME/POWER
2. PREV/REW
3. PLAY/PAUSE/TWS
4. NEXT/FAST FORWARD
5. FUNCTION/BAND
6. FREQUENCY INDICATING WINDOW
7. TUNING
8. SPEAKER
9. USB PORT
10. TF CARD SLOT
11. DC 5V
12. CHARGE/POWER INDICATOR
13. ANTENNA

RADIO

1. Turn on the power by turning the volume knob.
2. Push the function/band button to select AM/FM/SW.
3. When receiving the FM/SW channel, pull out the pull rod antenna to adjust the console knob until you receive the favorite radio.
4. Turning the direction of the unit when listening to the AM radio can get a better signal reception effect.
5. Please adjust the tuning knob slowly when adjusting the radio.

PLAY USB/TF
Instructions for playing music from USB or TF card are not provided in the manual. Please refer to the manufacturer’s website or contact customer support for detailed instructions.

BLUETOOTH

1. Press and hold the button on both units at the same time for two seconds until you hear the sound of dingdong.
2. When the two units are paired, you will hear “connected”.
3. To disconnect, press and hold on either of the two machines for 2 seconds to exit the interconnection function.

PC

1. Turn the volume knob to turn on the power and adjust the volume to a moderate position.
2. Push the function/band button to select the music mode.
3. Use a USB double male data cable to connect the PC and the radio.
4. Plug one end of the data cable into the USB port of the computer and the other end into the USB port of the radio.
5. The radio can now be used as your computer multimedia speaker.

CHARGING

1. When the sound of the radio becomes small and intermittent, use a standard Type-C charging cable to insert the DC 5V jack of the unit.
2. The charging indicator light will turn on, indicating that the radio is charging.
3. Charging time is about 4-6 hours.
4. Special attention: The indicator lights will automatically turn off after full charge.

BATTERIES

1. Push the battery cover to the left in accordance with the OPEN direction.
2. Place one 18650 lithium battery correctly according to the icon in the battery bin.
3. When not used for a long time, please take out the battery to avoid leakage of liquid that corrodes the internal parts of the radio.

FCC WARNING STATEMENT
The FCC warning statement is not provided in the manual. Please refer to the product packaging or contact customer support for the FCC warning statement.

Main Performance and Index

• Frequency Range: AM: 530-1710KHz, FM: 88-108MHz, SW: 5.9-18.0Hz
• Power Supply: DC 3.7V (18650X1)
• Battery Capacity: 1200mAH
• Maximum Output Power: 3.6W
• Speaker Output Power: 5W
• USB/TF/BT Playback Format: MP3, WMA, WAV

FAQ

• Q: How often should I charge the rechargeable battery?
  A: To protect the life of the rechargeable battery, ensure that the battery is charged at least once every three months.

• Q: Can I use the radio in extreme conditions like strong shocks and high humidity?
  A: It is recommended to avoid strong shocks and falls. Keep the radio away from heat and humidity to ensure proper functioning.

• Q: Will charging the radio interfere with AM radio signal?
  A: Yes, the AM radio signal may be interfered with when the radio is charging using DC power.

OPERATING INSTRUCTIONS

INDEXT TO PARTS & CONTROLS

1. VOLUME/POWER
2. PREV/REW
3. PLAY/PAUSE/TWS
4. NEXT/FAST FORWARD
5. FUNCTION/BAND
6. FREQUENCY INDICATING WINDOW
7. TUNING
8. SPEAKER
9. USB PORT
10. TF CARD SLOT
11. DC 5V
12. CHARGE/POWER INDICATOR
13. ANTENNA

OPERATING INSTRUCTIONS

The operating methods of various functions:

RADIO

1. Turn on the power by turning the volume knob.
2. Push the function / band button to select AM/FM/SW. When receiving the FM/SW channel, pull out the pull rod antenna to adjust the console knob until you receive the favorite radio. Turning the direction of the unit when listening to the AM radio can get a better signal reception effect.
3. Please adjust the tuning knob slowly when adjusting the radio.

PLAY USB/TF

Audio format: MP3, WMA, WAV.

1. Turn the volume knob to turn on the power and adjust the volume to a moderate position, push the function/band button to select the music mode.
2. After plugging into the USB/TF socket, the device will automatically play the music files on the USB/TF card. (Please make sure that there are MP3, WMA, WAV audio files in your USB or TF card)
3. During playback, press the “ ” button to select the previous/next song. Long  press the “ ” button to fast forward or rewind.
4. During playback, press the button to pause the music playback and press again to  continue the music playback.

BLUETOOTH

1. Turn the volume knob to turn on the power and adjust the volume to a moderate position. Push the function/band button to select the music mode. When the USB/TF card is not inserted (or double-click the“ ” button to switch to the bluetooth function), you will hear “Waiting for pairing”.
2. Search and connect the bluetooth device “BT03”. When the bluetooth connection is complete, you will hear the “Connected” sound.
3. When the bluetooth connection is successful, you can play music from the mobile music application APP.
4. During playback, press the “ ” button to select the previous/next song.
5. During playback, press the “ ” button to stop the music, and press it again to play the music.
6. TWS: (There must be two unit of the same model) When one machine is playing music in bluetooth mode, turn on another unit of the same model. You will hear “Waiting for pairing” from the other machine. Press and hold the “ ” button on both units at the same time for two seconds until you hear the sound of “dingdong”. When the two unit are paired, you will hear “connected”. If you want to disconnect, press and hold ” on either of the two machines for 2 seconds to exit the interconnection function.

PC
Turn the volume knob to turn on the power and adjust the volume to a moderate position, and push the function/band button to select the music mode. Use the USB double male data cable (purchased by the user) to connect the PC and our radio. Plug the data cable into the USB port of the computer and the USB port of the radio, and then it can be used as your computer multimedia speaker.

CHARGING

1. When the sound of the radio becomes small and intermittent, please use a standard Type-C charging cable to insert the “DC 5V” jack of the unit, and the charging indicator light on which means the radio is charging.
2. Charging time is about 4-6 hours.
   Special attention: The indicator lights will automatically turn off after full charge.

BATTERIES

Please push the battery cover to the left in accordance with the OPEN direction, and then place one 18650 lithium battery correctly according to the icon in the battery bin. (when not used for a long time, please take out the battery to avoid leakage of liquid that corrodes the internal parts of the radio)

MAIN PERFORMANCE AND INDEX

1. Frequency Range: AM: 530-1710KHz
2. FM:88-108MHz
3. SW: 5.9-18.0Hz
4. Power Supply: DC 3.7V(18650X1)
5. Battery Capacity: 1200mAH
6. Maximum output power: 3.6W
7. Speaker output power: 5W
8. USB/TF/BT playback format: MP3, WMA, WAV

FCC WARNING STATEMENT

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
• These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.

WARNING

1. To protect the life of the rechargeable battery, ensure that the battery is charged at least once every three months.
2. Avoid strong shocks and falls.
3. Keep away from heat and humidity.
4. The AM radio signal will be interfered when DC is charging.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>