CRIVIT SP-154 Bicycle Helmet with LED Rear Light Owner’s Manual

: July 17, 2024
: crivit

Table of Contents

CRIVIT SP-154 Bicycle Helmet with LED Rear Light
Product Information
Product Usage Instructions
Technical data
SPEQ GmbH warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CRIVIT SP-154 Bicycle Helmet with LED Rear Light

Product Information

Specifications

Product Name: Bicycle Helmet / LED Rear Light SP-154
Model Number: IAN 436309_2310
Manufacturer: SPEQ GmbH
Compliance: PSA Regulation 2016/425 EN 1078:2012 + A1:2012
Battery: Lithium Cell CR1620 3V

Product Usage Instructions

Safety Information
Before using the product, read the safety information provided in the user manual to ensure safe usage.

Bicycle Helmet SP-154

The Correct Helmet Position: Ensure the helmet is positioned correctly on your head for optimal protection.
Adjusting the Single-Hand Twisting Fastener: Utilize the turning knob at the back of your head to adjust the size for a comfortable fit.
Adjusting the Strap Divider: Make sure the strap divider is securely closed to prevent helmet slippage.
Adjusting the Chin Strap: Always fasten the chin strap securely before riding for maximum safety.
Visor: The helmet may include a visor for additional protection from sunlight and debris.
Cleaning and Care: Clean the helmet regularly with mild soap and air dry it to maintain hygiene.
Disposal: Follow proper disposal guidelines when disposing of the helmet.

LED-Rear Light SP-154

Before the First Use: Familiarize yourself with the rear light functions before initial use.
Removal and Attachment of the Tail Light: Learn how to properly remove and attach the rear light as needed.
Functions: Explore the different functions of the LED rear light for enhanced visibility.
Changing the Batteries: Follow instructions to replace batteries when needed for continuous operation.
Cleaning and Care: Keep the rear light clean to ensure optimal performance.
Disposal: Dispose of old batteries and the rear light properly according to regulations.

Frequently Asked Questions (FAQ)

Q: How do I know if the helmet is the right size for me?
- A: To determine the correct helmet size, try different sizes and choose one that fits comfortably and securely on your head. Refer to the user manual for size adjustment instructions.
Q: Can I replace the batteries in the LED rear light myself?
- A: Yes, you can replace the batteries in the LED rear light following the instructions provided in the user manual. Make sure to use the correct type of batteries.

BICYCLE HELMET/ LED REAR LIGHT SP-154

BICYCLE HELMET / LED
REAR LIGHT SP-154
Owner´s manual

Service Addressee:
SPEQ GmbH
Tannbachstr. 10
D-73635 Steinenberg
Hotline: 00800 30 777 999
Email: service@speq.de
Last update ∙ Stan informacji ∙
01/2024

Product Service GmbH Ridlerstr. 65
D-80339 München GERMANY
EN 1078:2012 + A1: 2012

Bicycle helmet SP-154

Dear Customer!

We are pleased that you have decided to purchase one of our high-quality products, which are manufactured and certified in strict adherence to the currently valid safety standards.

Familiarize yourself with this product before first use. Carefully read the operating instructions and the safety information. Use the product only as described and for the indicated purposes. Keep these instructions. If you give the product to a third party, be sure to include all the documents with it.

Safety information

Warning! This helmet should not be used by children while climbing or doing other activities when there is a risk of strangulation/hanging if the child gets trapped with
the helmet.
Your helmet was specially designed for protection during cycling , skateboarding , roller-skating and riding a scooter . It must not be used for other types of sport or for motorcycling This helmet is not suitable for downhill riding.
Please note that the helmet can only provide protection if it fits correctly. Please ensure you try out a range of different sizes before buying.
Please be aware that despite correct adjustment your helmet cannot always protect you from all injuries.
The helmet should be checked for visible deficiencies at regular intervals.
The helmet needs to be replaced after any hard impact, blow or deep scratch, as it thereby loses its protective function.
The helmet must also be replaced when it no longer fits properly or no later than 5 years after the date of manufacture, even if no damage can be detected.
Any adjustment to or removal of the original parts of the helmet can extremely impair its protective function. The helmet may not be altered in order to make additions in a way not recommended by the manufacturer.
High temperatures, from as low as 60° C, can seriously damage the helmet. Uneven helmet surfaces and the formation of small blisters are signs of such damage. Do not store behind panes of glass, e.g. in the car or close to sources of heat or warmth.
The helmet has reflective details for higher visibility in road traffic.

User information

The correct helmet position

The helmet must always be levelly horizontal on your head (Fig. A).
If the helmet is too far forward, it can impair your vision.
If the helmet is too far back, your forehead is not sufficiently protected (Fig. B)

Adjusting the single-hand twisting fastener
The integrated size-adjusting system can be adjusted using a turning knob at the back of one’s head (Fig. C):

smaller = twist clockwise
bigger = twist anti-clockwise

Adjusting the strap divider

Open the strap divider (Fig. D).
The strap divider must be positioned in such a way, that the straps are taut but comfortable. The strap divider must be below the ear, and the straps must not cover the ears.
Close the strap divider (Fig. E).

An open strap divider can lead to slipping of the helmet in the event of an accident and thus to a loss of protection!!!

Adjusting the chin strap

The chin strap (Fig. G.3) has been adjusted correctly if you feel slight pressure when you open your mouth. The buckle shall not be positioned on the jawbone.
If the chin strap (Fig. G.3) is too loose it must be pulled tight using the winding (Fig.G.2) on the fastener (Fig. G.1).
If the chin strap (Fig. G.3) is too tight it must be loosened also using the winding (Fig.G.2) on the fastener (Fig. G.1).

Please note that you must always make sure that the fastener is closed before you ride !!! (Fig. F)
Please be aware that the helmet can only protect if it fits properly. Please try out different sizes and choose the one in which the helmet fits comfortably and sits firmly upon your head.

Visor

Carefully pull out the pins on the visor from the pin holes on the helmet shell to remove the visor (Fig. H).
The fixing holes of the visor can be closed with the pins supplied.

Attention: The pin holes on the helmet can expand through excessive use. In this case, the visor may no longer be used.

Cleaning and care

All chemicals, paints and stickers can seriously impair the protective effect of the helmet.
Only clean your helmet with lukewarm water, mild soap and a soft cloth.
After every use, leave your helmet exposed to the air in order for it to dry.
The inner pads are removable. Clean the inner padding with lukewarm water and mild soap and then let it air dry.

Disposal
Please contact your local waste disposal company for the disposal of the helmet.

LED-REAR LIGHT SP-154

Safety information

The LED rear light is not a substitute for the light equipment stipulated by the German standard StVZO (§ 67).
When used correctly, the LED rear light gives better visibility. The LED backlight should not be used during rainy weather. It cannot be guaranteed to work if it gets wet.
Please only use the LED rear light together with this cycle helmet and always put it onto the rotating wheel of the size-adjustment system.
The LED rear light is only intended for personal use.
Please make sure that, during use, the LED cannot be covered or obscured by collars, rucksacks or movements of the head.
The LED light can under certain circumstances come loose without this being noticed,
if it becomes caught on jackets, rucksacks or other objects.
Please be aware that the battery of the LED light can fall out or become flat. Therefore, check the light regularly for proper functioning.
The batteries must not be exposed to excessive heat such as sunshine, fire or the like.
In the event that the batteries are incorrectly changed there exists the risk of explosion. Only replace the batteries with the same or an equivalent battery type.
Parents should ensure that their child also checks to make sure that the LED backlight is working on a regular basis.
Warning! LED rear light not suitable for children under 14 years. There is a risk of high temperature and disassembly.
The LED rear light is not a toy and its use by children is only permitted if they are under the supervision of adults.
The light source of this light cannot be replaced. Once the light source has reached the end of its life, the whole light must be replaced.
The changing of batteries must only be carried out by adults.
If the battery leaks, avoid any contact with the skin as this can lead to skin irritation.
Leaking batteries must be disposed of immediately.
Do not short circuit batteries or take them apart. Do not make any modifications to the battery. Do not squeeze or deform the battery and do not drill into the battery.
Do not continue to use the battery if it is damaged.
Keep the batteries in the original packaging.
Never try to recharge non-rechargeable batteries! There is a danger of explosion!
Replace the battery only with the same or an equivalent type of battery.
Keep new and used batteries away from children.
Children can put small parts such as the button cell supplied in their mouths when playing and choke on them. Do not let children play with small parts.
Seek medical advice immediately if you know or suspect that a battery has been swallowed or entered the body in any other way.
Switch off the LED rear light after use. Remove the battery from the helmet if it will not be used for a longer period of time. Store the battery in a cool and dry place.
Do not bring lithium batteries with damaged casings into contact with water.
Ingestion of button cells or batteries can cause burns, perforation of soft tissues and in severe cases death.

User information

Before the first use
Take the tail light off the helmet (Fig. J). Before the first use, remove the safety strips from the reverse of the LED tail light (Fig. I).

Removal and attachment of the tail light
There is a hole behind the rear light on the inside of the helmet. Use the back of a pin or similar and insert it into the hole. To release the rear light from the holder, you must now exert a little force and press the pin against the rear light, which is on the other side.

To remove the rear light, pull the rear light out of the holder (Fig. J).
To attach it, the LED rear light must be re-plugged on the holder provided for this purpose.

Functions
The LED rear light has three different functions, each of which can be used as desired (Fig.K).

Press x1 : continuous light,
press x2 : flashing light,
press x3 : colour chaser,
press x4: light off.

Changing the batteries
The LED tail light comes equipped with a CR 1620 (3V) battery.

To replace the battery, unlock the screws at the back of the light using a small Phillips type head screwdriver.
Subsequently, lift off the lid and the circuit board, exchange the battery and remount the circuit board and the lid. In doing so, please make sure that the polarity is correct when installing the new battery (Fig. L). The + pole points downwards when the batteries are inserted.
Now, attach the lid again using the four screws (Fig. L).
Battery type

Cleaning and care
The housing of the LED rear light can be cleaned with a damp cloth.

Disposal
Please do not dispose of flat batteries via the household waste, but instead use the collecting container intended for this purpose.

Old devices must not be disposed of with household waste!
If the product can no longer be used, every user is required by law to dispose of the device separately from household waste, e.g. at a collection point in their com-munity/borough. This ensures that old devices are recycled properly and also avoids pollution of the environment. For this reason, electrical equipment is marked with the symbol shown here.

Batteries and rechargeable batteries must not be disposed of as household waste!
As a consumer, you are required by law to return all batteries and rechargeable batteries, regardless of whether they contain harmful substances* or not, at a collection point in your local authority / district or in retail to ensure that they can be disposed of in an environmentally friendly way.

Batteries and rechargeable batteries that are not permanently installed in the device must be removed and disposed of separately before disposal.
Please return batteries and rechargeable batteries only when discharged!
*marked with: Cd = cadmium, Hg = mercury, Pb = lead

Technical data

LED rear light
Model: SP-154
Battery: 1x CR1620, 3V
Protection class: III
Risk group : Exempt group (the light does not pose a photobiological hazard)

Key to the symbols

Declaration of conformity (see chapter „Declaration of conformity“): Products marked with this symbol comply with all applicable European Community regulations Economic area.
Protection class lll. The LED light is supplied with low voltage via a battery.
Expiry date (battery and helmet)
Helmet weight
Date of manufacture (battery and helmet)

The Seal of Approved Safety (GS mark) certifies that a product meets the requirements of the German Product Safety Act (ProdSG). The GS mark indicates that the safety and health of the user are not at risk if the product is used as intended and if foreseeable misuse of the marked product occurs.

Read the user manual

DC voltage

Protection against splash water

ATTENTION! Contains ingestible button/coin cells! Danger of choking! KEEP AWAY FROM CHILDREN

Declaration of Conformity
The EU Declaration of Conformity can be obtained from the following address: SPEQ GmbH

Tannbachstraße 10
73635 Steinenberg
GERMANY

Testing institute

TÜV SÜD Product Service GmbH
Ridlerstr. 65
80339 München
GERMANY
Identification number: 0123
PSA 2016/425

The complete Declaration of Conformity can be found at www.speq.de/konformitaetserklaerung

SPEQ GmbH warranty

Dear customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a safe place. This will be required as proof of purchase. If any material or manufacturing fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you or refund the purchase price (at our discretion).

This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the three-year warranty period, along with a brief written description of the fault and of when it occurred.

If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery. The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or to fragile parts which could be considered as consumable parts such as switches, batteries or parts made of glass. The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided. This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions

Please have the till receipt and the item number (IAN 436309_2310) available as proof of purchase.
You will find the item number on the type plate on the product, an engraving on the product, on the front page of the operating instructions (below left) or on the sticker on the rear or bottom of the product.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

You can download these instructions along with many other manuals, product videos and installation software at www.lidl-service.com This QR code will take you directly to the Lidl service page (www.lidl-service.com) where you can open your operating instructions by entering the item number (IAN) 436309_2310.

Manufacturer service address: