CRIVIT 9625821 Golf Laser Rangefinder Instruction Manual
- June 4, 2024
- crivit
Table of Contents
Instruction Manual
IAN: 369598 / Art. No.: 9625821
GOLF LASER RANGEFINDER
SAFETY INSTRUCTIONS
CLASS 1 LASER PRODUCT
This device has been classified as a CLASS 1 LASER product according to IEC
60825-1.
The accessible laser radiation is safe under reasonably foreseeable conditions
and under normal conditions of use. Do not open the housing. The device does
not contain any parts that can be serviced by the end consumer. Servicing of
this unit must be left up to qualified service personnel.
Intended use
The device is designed for measuring distances.
RISK of physical injury!
Never look through this device directly at or near the sun.
There is a risk of BLINDINGYOURSELF!
This device contains electronic components that are powered by either a main
connection or batteries. Never leave a child unsupervised with this device.
The device should only be used as per these instructions otherwise there is a
serious RISK of ELECTRICAL SHOCK.
Batteries should be kept out of children’s reach. When inserting batteries
please ensure the polarity is correct. Leaking or damaged batteries can cause
injury if they come into contact with the skin. If you need to handle such
batteries please wear suitable safety gloves.
Children should only use this device under supervision. Keep packaging
materials (plastic bags, rubber bands, etc.) away from children. There is a
risk of SUFFOCATION.
DANGER of fire and explosion!
Never short-circuit the device or batteries or throw them into a fire.
Exposure to high temperatures or misuse of the device can lead to short
circuits, fire, or even explosion! Never subject the device – especially the
lenses – to direct sunlight. Light ray concentration can cause fires and/or
burns.
RISK of material damage!
Never take the device apart. Please consult your dealer if there are any
defects. The dealer will contact our service center and send the device in for
repair if needed.
Only use the batteries that have been recommended. Always replace low or used
batteries.
Remove the battery from the device for long periods of disuse.
Do not subject the device to temperatures exceeding 60 C.
RESPECT privacy!
This device is meant for private use. Respect others’ privacy – do not use the
device to look into other people’s homes, for example.
EC DECLARATION OF CONFORMITY
Bresser GmbH has issued a “Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/9625821/CE/9625821_CE.pdf
SCOPE OF DELIVERY
- Golf Laser Rangefinder
- Hand strap
- Case
- Cleaning cloth
- Instruction manual
- 1x 3V CR2 battery
TECHNICAL DATA
Lens diameter | 21mm |
---|---|
Coating | Multi-coated |
Field of view | 7.2° |
Laser | 905nm |
Resolution | +/- 1m |
Range | 5 – 1100 m |
Weight | 181 g |
Magnification | 6X |
Eye relief | 16 mm |
Safety | LED Class 1 |
Battery | 1x CR2 (3V) |
Waterproof | IPX4 |
Size | 106 x 35 x 73 mm |
PARTS OVERVIEW
A. Power button
B: Eyepiece cover (focus wheel)
C. Battery compartment cover
D. Strap holder
E. Objective lens
F. Laser reception objective
G. Mode button (MODE)
START THE DEVICE
Hold the power button for about 1 second. On the first startup, the display
will enter the default standard ranging mode.
The next time you start the device you will always start with the last mode
used.
The device switches off automatically after 30 seconds of inactivity.
DIOPTER ADJUSTMENT
If the display is out of focus, the focus can be adjusted by turning the
eyepiece cover (focus wheel) to the left or right.
LOW POWER WARNING
When the battery power is too low, the low battery icon is displayed to remind
you to change the battery.
BATTERY REPLACEMENT
Open the battery compartment by turning the battery cover. Insert a new CR2 battery. Ensure that the battery polarity (+/-) is correct. Close battery cover.
RANGING UNIT METER (M) / YARD (Y) SELECTION, FOG MODE ON/OFF & GOLF SLOPE COMPENSATION ON/OFF SETTING
Press the power button . The default mode is “Standard ranging” for first-time
to start.
Hold the (MODE) button for approx. 3 seconds, M (meter) or Y (yard)
flashes. Press the power button to select the unit.
Then press the (MODE) button. “Fog” is now flashing. Press the power button to
choose fog on or off. Flashing = on, static = off. The fog mode is used in
foggy/rainy conditions to provide an accurate range in atmospheric
interference.
Press the (MODE) button again. “bc” (ballistics calculation) is now flashing.
Press the power button to choose golf slope compensation on or off. Flashing
= on, static = off.
After selection, hold the (MODE) button to exit.
MODE SELECTION
Press the (MODE) button to cycle between:
MODE 1: Standard ranging
MODE 2: Flag lock [ ] MODE 3: Golf slope compensation [ ] MODE 4: Horizontal
distance [HD] MODE 5: Vertical height [VH] MODE 6: Speed
Note: When the fog setting is on, “Fog” is displayed on the screen and
all modes will use the fog setting.
MODE 1: STANDARD RANGING
Aim the center target area at an object, and press the power button to
obtain the distance.
SCAN MODE
In standard range mode, hold the power button to activate scan mode and pan
the rangefinder over the targets to get continuous readings.
MODE 2: FLAG LOCK
This advanced mode allows you to easily lock on to the flag without
accidentally measuring background targets (e.g. trees).
Hold down the power button and slowly move the target area over the flag or the desired object until a circle surrounds the flag symbol [ ]. Now only the distance of the flag is displayed without interfering with background objects like trees affecting the measurement.
MODE 3: GOLF SLOPE COMPENSATION
The Golf slope compensation mode adjusts for differences in elevation and is
suitable to use in uphill and downhill situations. The [ ] icon indicates that
the unit adjusts the distance based on the slope angle.
Aim the center target area at an object, and press the power button . Distance and slope angle readings alternate in the viewfinder.
The distance to both flags is 150 meters. However, flag A is on a hill. If you were to play this hole at 150 meters, the ball (X) would land in front of the flag because you have not taken the slope into account.
MODE 4: HORIZONTAL DISTANCE MEASUREMENT
Aim the center target area at an object and press the power button . The
horizontal distance and the angle to the target are displayed
alternately
MODE 5: VERTICAL HEIGHT MEASUREMENT
Aim for the bottom of the object and press the power button to scan the bottom
of the object. Next, move to the top of the object and press the power button
again to scan the top of the object. The distance from the bottom to the top
is measured and the height is displayed.
MODE 6: SPEED MODE
Aim at the moving object and press and hold the power button until the speed
is displayed.
IF NO DISPLAY APPEARS ON THE INTERNAL LCD SCREEN
- Make sure the battery is inserted correctly and hold the power button for about 1 second.
- Make sure that no object is blocking the view of the objective lens, such as transparent window glass or hand, etc.
- When measuring, please hold the device steady and aim properly at the target, then press the power button.
CLEANING AND MAINTENANCE
Remove the device from it’s energy source before cleaning (remove the
battery). Lenses (eyepieces and/or object lenses) should be cleaned with a
soft, lint-free cloth (e.g. microfibre) only. Do not use excessive pressure –
this may scratch the lens. Dampen the cleaning cloth with a spectacle cleaning
fluid and use it on very dirty lenses.
Protect the device from dust and moisture.
Store the device in the bag supplied or in its original packaging. Batteries
should be removed from the device if it is not going to be used for a long
period of time.
DISPOSAL
Dispose of the packaging materials properly, according to their types, such as paper or cardboard. Con- tact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! As per Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.
WARRANTY & SERVICE
The regular guarantee period is 5 years and begins on the day of purchase. You
can consult the full guarantee terms and details of our services at
www.bresser.de/warranty_terms.
Errors and technical changes are reserved.
Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de @BresserEurope
E-Mail: service@bresser.de
Service-Hotline: +49 28 72 80 74 210
Manual_9625821_Golf-Laser-Rangefinder_de-en-es-fi-se-dk_CRIVIT_v122020a
References
- bresser.de/warranty_terms
- Bresser | Startseite | Expand Your Horizon mit BRESSER
- Bresser | Startseite | Expand Your Horizon mit BRESSER
- index · powered by h5ai 0.26.1 (http://larsjung.de/h5ai/)