Luxor B0C5B9Q6JZ 70 x 48 Ft Stand Up Desk Store Expanse Modular Wall User Manual

Luxor B0C5B9Q6JZ 70 x 48 Ft Stand Up Desk Store Expanse Modular Wall

USER MANUAL

Contact Us
luxorworkspaces.com

Modular Walls

Welcome to a more productive workspace! Whether you seek relief from ambient noise, want to mitigate visual distractions, are dividing up a large and open area, or you’re simply looking for an easy and cost-effective alternative to traditional cubicles, you’ve chosen a system that will meet and exceed your expectations. And no matter where you plan to install your new modular wall system – it may be an office, healthcare clinic, school, or even at home – we would love to see your completed setup!

Understanding the Modular Wall System

Congratulations on your purchase of a Modular Wall System! We know you can’t wait to experience a quieter, less distracting environment, so let’s get started with a quick overview.

Effortless “Drop-In” Assembly

We designed the Modular Walls to be easy to put together.
Each Modular Wall model consists of various frames and panel components that slide together for a simple, intuitive assembly.

Multifunctional Inner Panels

Depending on the model wall you purchased, it will contain two or three types of Inner Panels that can be arranged in any configuration you choose.

• Sound-Dampening PET Panels: These fabric panels block out visual distractions and absorb 85% of the ambient noise that passes through them.
• Acrylic Panels: These semi-transparent panels help reduce visual distractions while still allowing natural light to shine through.
• Whiteboard Panels (select models): These magnetic panels block visual distractions and allow for easy notetaking and collaboration.

Expandable and Reconfigurable Design

You can reconfigure or add to your Modular Wall system to adapt to your growing organization’s needs. The key is to understanding the difference between a Starter Wall and an Add-On Wall.

• A Starter Wall has Vertical Frame Columns and Feet at both ends, allowing it to be freestanding by itself without being connected to other walls. If you would like to connect multiple Add-On Walls together, a Starter Wall is needed as the “anchor” of any Modular Wall system.
• An Add-On Wall has a Vertical Frame Column and a Foot at only one end. The other end must be attached to either a Starter Wall or to another Add-On Wall that is part of a complete Modular Wall system. Add-On Walls can attach at either a 90° angle or in a straight line.

Component Overview

Assembly Tips

• When assembling your system, assemble the Starter Wall first, then assemble and attach Add-On Wall(s).
• Before inserting panels, check to make sure the Cable Raceway is facing toward your desk.
• Pre-plan the arrangement of your Inner Panels before inserting them into the frame. Take into account natural light sources, positioning of your desk, distractions you’d like to block out, etc. NOTE: You may also choose to arrange Inner Panels based on the suggested layout in these instructions.
• When dropping the Cable Raceway and Horizontal Panel Separators into the Vertical Frame Columns, take care to drop both ends down evenly. Do not let one side drop down faster than the other.

Cleaning and Care

PET Panels

1. Using an upholstery attachment, vacuum to remove dust and loose dirt.

2. Lightly mist using an alcohol solution in a spray.

a. Do not saturate.
b. NOTE: Lysol aerosol spray has also been tested and found safe on SUDS fabrics.

3. Allow to air dry.

IMPORTANT: DO NOT clean with soapy water, as this may cause discoloration.

Whiteboard Panels

1. Clean using a mild solution of water and dish soap.
a. Apply the solution using a spray bottle and wipe using a clean cotton towel or microfiber cloth.
b. Avoid paper towels, as they can cause scratches.
c. Follow up by wiping with a second cloth dampened with water
2. Disinfect using an alcohol wipe or by using a clean cotton or microfiber cloth dampened with a 70% alcohol solution.
a. Avoid paper towels, as they can cause scratches.
3. Allow to air dry.

Frosted Acrylic Panels

1. Using a spray bottle, apply a solution of soapy water to dampen the entire surface you wish to clean.
2. GENTLY wipe using a clean microfiber cloth and gently buff to remove the remaining liquid.
3. If any smudges remain, repeat the process on the affected area.

IMPORTANT: DO NOT use paper towels and/or ammonia-based products like glass cleaners, as these will permanently damage the acrylic. Only use clean microfiber cloths, water, and mild dish soap.

Table of Contents: Starter Wall Assembly Instructions

Assembly Instructions: 53” x 48” Starter Wall, Narrow & Medium Inner Panels

Part Numbers: 5348-FCG, 5348-FCGB, 5348-FWCG, 5348-FWCGB

Assembly Instructions: 53” x 48” Starter Wall, Wide Inner Panels
Part Numbers: 5348-FWCGWB, 5348-FWCGWG

Assembly Instructions: 53” x 70” Starter Wall, Narrow & Medium Inner Panels
Part Numbers: 5370-FCG, 5370-FCGB, 5370-FWCG, 5370-FWCGB

Assembly Instructions: 53” x 70” Starter Wall, Wide Inner Panels
Part Numbers: 5370-FWCGWB, 5370-FWCGWG

Assembly Instructions: 70” x 48” Starter Wall, Narrow & Medium Inner Panels
Part Numbers: 7048-FCG, 7048-FCGB, 7048-FWCG, 7048-FWCGB

Assembly Instructions: 70” x 48” Starter Wall, Wide Inner Panels
Part Numbers: 7048-FWCGWB, 7048-FWCGWG, 7048-WB, 7048-SB, 7048-PS

Assembly Instructions: 70” x 70” Starter Wall, Narrow & Medium Inner Panels
Part Numbers: 7070-FCG, 7070-FCGB, 7070-FWCG, 7070-FWCGB

Assembly Instructions: 70” x 70” Starter Wall, Wide Inner Panels
Part Numbers: 7070-FWCGWB, 7070-FWCGWG, 7070-WAB, 7070-PAS, 7070-SB

Table of Contents: Add-On Wall Assembly Instructions

Assembly Instructions: 53” x 48” Add-On Wall, Narrow & Medium Inner Panels
Part Numbers: 5348-XCG, 5348-XCGB, 5348-XWCG, 5348-XWCGB

Assembly Instructions: 53” x 48” Add-On Wall, Wide Inner Panels
Part Numbers: 5348-XWCGWB, 5348-XWCGWG

Assembly Instructions: 53” x 70” Add-On Wall, Narrow & Medium Inner Panels
Part Numbers: 5370-XCG, 5370-XCGB, 5370-XWCG, 5370-XWCGB

Assembly Instructions: 53” x 70” Add-On Wall, Wide Inner Panels
Part Numbers: 5370-XWCGWB, 5370-XWCGWG

Assembly Instructions: 70” x 48” Add-On Wall, Narrow & Medium Inner Panels
Part Numbers: 7048-XCG, 7048-XCGB, 7048-XWCG, 7048-XWCGB

Assembly Instructions: 70” x 48” Add-On Wall, Wide Inner Panels
Part Numbers: 7048-XWCGWB, 7048-XWCGWG

Assembly Instructions: 70” x 70” Add-On Wall, Narrow & Medium Inner Panels
Part Numbers: 7070-XCG, 7070-XCGB, 7070-XWCG, 7070-XWCGB

Assembly Instructions: 70” x 70” Add-On Wall, Wide Inner Panels
Part Numbers: 7070-XWCGWB, 7070-XWCGWG

Specifications

• Effortless Drop-In Assembly

• Multifunctional Inner Panels

• Expandable and Reconfigurable Design

FAQ (Frequently Asked Questions)

**Q: Can I mix different types of Inner Panels in my Modular Wall

system?**

A: Yes, depending on the model wall purchased, you can mix and match Inner Panels to create your desired configuration.

**Q: Is it possible to disassemble and reconfigure the Modular Wall

system?**

A: Absolutely! The Modular Wall system is designed for easy disassembly and reconfiguration to adapt to changing needs.

 Q: Do I always need a Starter Wall, or can I just connect two Add-On

Walls?

A: You must always have a Starter Wall in your wall system.

Q: Can I connect two Starter Walls?

A: Yes, but you will end up with an unused Vertical Frame Column and Foot.
If expanding your system, always select Add-On Walls.

Q: Can I connect a 70”-tall Add-On Wall to a 48”-tall Starter Wall?

A: No. The Starter Wall must be taller or the same height as the Add-On Wall.

Q: Can I take my Modular Wall System apart?

A: Yes. Simply disassemble in the reverse order as outlined in the instructions.

Q: Is there a limit to how many Add-On Walls I can connect to a Starter

Wall?

A: No! The system is infinitely expandable. The only limitation will be your available space.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>