LUXOR BGGP800 Bluetooth Speaker Instructions

LUXOR BGGP800 Bluetooth Speaker Instructions

Safety Instructions

• To protect against the risk of electrical shock/malfunction, do not put the Speaker or its USB Cable in water/liquids / heat / direct sunlight.
• Children must never play with the Speaker.
• Stop using the Speaker if the USB Cable is damaged / the Speaker has been dropped/ damaged / liquid has entered the inside of the Speaker. Unplug the USB Cable from the USB port if a fault is detected and contact our customer service for examination.
• Do not try to repair the Speaker yourself. For safety reasons, only authorized service personnel are permitted to carry out repairs and fit replacement parts to the Speaker.
• When disconnecting the Speaker from the USB plug, pull the plug, not the USB Cable.
• Make sure the USB Cable does not get pinched.
• Switch off the Speaker when it is not in use.
• Condensation may occur if the Speaker gets really cold (e.g. during transportation in the winter). Wait for two hours to let the Speaker reach room temperature before you use the Speaker.

Overview

1. Power output
2. Power input
3. TF card port
4. Aux in port
5. Play / Pause / status indicator
6. Volume -/ Backward
7. Volume +/ Forward
8. Hanging hole
9. Mode button
10. EQ mode button
11. Power button
12. Power bank button
13. Battery Indicator
14. Bluetooth / Mobile hands free

Operation

Get Started

1. Long press Power button to power on/off the speaker.
2. Each time to power on the speaker, the speaker volume will be around 25%. The default working mode is Bluetooth mode.

Bluetooth Mode

1. Power on the speaker and enter into Bluetooth mode. The light indicator will twinkle in blue.

2. Turn on the Bluetooth function of your mobile/other devices, start to search for Bluetooth devices, the “BGGP800” will be found, press to connect it. When connected, the speaker will prompt and the light indicator will stop twinkling in blue.
   Note: Short press the Bluetooth button can enter the Bluetooth mode directly.

3. Turn on the mobile or other devices’ music player, the speaker will play the selected music.

4. The speaker will pair with the latest Bluetooth device automatically when devices are in the pairing range. Long press the Bluetooth button to disconnect the current Bluetooth connection.

5. Play/Pause button:
   Short press to play/pause.

6. Volume -/ Backward button:
   Short press to previous track;
   Long press to decrease the volume.

7. Volume +/ Forward button:
   Short press to next track;
   Long press to increase the volume.

Mobile Hands-free (in Bluetooth Mode)

1. Answer the call
   Short Press Bluetooth button to answer the call.

2. End the call
   Short press Bluetooth button again to end the call.

3. Redial the call
   Double press Bluetooth button can dial back the last phone call.

4. Private call
   Short press + or – to switch the call between the speaker and mobile phone.

5. Reject call
   Long press Bluetooth button to reject the call.

TWS function (in Bluetooth Mode)

1. Power on two BGGP800, ensure both speakers are waiting to pair.
2. Long press the Mode button on either speaker to enter the TWS pairing mode. The indicator light will flash in blue and green color alternately.
3. Once two speakers are paired, the speaker you pressed is the main speaker, whose indicator flashes in blue. The other one whose indicator lights in green is the slave speaker. The two speakers can play the same music in TWS mode after connecting successfully.
4. Long press the M button on either one speaker to disconnect the TWS pairing.
5. Double short press the M button to clear the TWS pairing memory.

AUX in Mode

1. Use the included 3.5mm audio cable to connect the speaker to an audio source (PC, MP3/MP4, mobile phone).

2. Short press the Mode button to enter AUX in mode. The speaker will play the music from the audio source.
   Note: Suggest use the branded adaptor (5V 2A) to charge the speaker when the speaker connects to the PC via the Aux In cable to play music.

3. Short press the Play/Pause button, the music will be mute on the speaker. But the audio source is playing the music.

TF card Mode

1. Inserting the TF card into the speaker, short press the Mode button to enter the TF card mode, the speaker will play the TF card music directly.
   Note: Support up to 32G TF card; support the audio format MP3, WMA, WAV,APE,FLAC.

2. Play/Pause button:
   Short press to play/pause;
   Long press to switch the playing mode: repeat all/ repeat one.

3. Volume -/ Backward button:
   Short press to previous track;
   Long press to decrease the volume;
   Double short press to the previous folder of the TF card .

4. Volume +/ Forward button:
   Short press to next track;
   Long press to increase the volume;
   Double short press to the next folder of the TF card.

5. Card reader: Connect the speaker to the computer by the included USB cable, and power off the speaker. The speaker will enter the card reader mode, the TF card can be read and written on the computer directly.

Equalizer EQ

1. The default EQ is standard,
2. Short press EQ button to switch to Bass mode, press again switch to Treble mode. (Normal – Bass – Treble)

Power bank

1. Power off the speaker, connect the speaker to the mobile phone or other digital devices via a USB cable.
2. Press the Power bank button to start charging.
   Note: The max output current at 2.1A.
   Note: The speaker can work as a power bank only in power-off status.

Charging the speaker:

1. When the battery is low, the speaker will prompt.
2. Charge the battery by a USB adaptor immediately. When fully charged, the four battery indicators lit up.
   Note: Suggest use the adaptor specification at 5V/2A

Specifications

Other

Copyright
This manual is the copyright of CI no 556520-4137. No part of this manual may be revised, copied or transmitted in any way without written permission from CI no 556520-4137.

Recycling
This product’s packaging materials are recyclable and can be reused. This product and the accessories packed together are the applicable product to the WEEE directive except batteries. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

Law and Safety
The CE mark indicates that this product has been manufactured according to current regulations for electromagnetic fields, which means that it is safe to use if used according to safety instructions. The product is manufactured according to current regulations within the EU legislation, limiting the use of hazardous substances in electrical and electronic equipment.

Statement
This manual does not provide any warranty or related declarations. All information in this manual including the product specification, pictures and literature is just for reference, CI no 556520-4137 reserves the rights to update the contents of this manual without further notice.

Bluetooth
Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks is under license.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>