LUXOR DTWS002 Shop Desk w/Pigeonhole Bin Unit Instruction Manual
- June 4, 2024
- LUXOR
Table of Contents
DTWS002
Shop Desk
Installation Instructions
DTWS002 Shop Desk w/Pigeonhole Bin Unit
Tools Required:
Philips Head Screwdriver, Hex Wrench, Allen Wrench (included)
Parts Key
-
Attach inner legs to outer legs at your desired height using Philips head screws (M6x16mm). Do this with all 4 legs.
-
Insert all 4 legs into the upper cabinet.
Secure using 4 Philips head screws (M6x16mm) per leg. -
Insert the shelf between the legs. Secure the shelf to each leg using 2 Philips head screws (M6x16mm screws) per leg.
-
Insert 1 caster into each leg.
-
Place the storage rack on top of the work surface.
Secure in place using 2 hex head screws (M6x25mm). -
Attach the cord wrap to the rear side of the work surface using 2 hex head screws (M6x16mm).
www.luxorworkspaces.com
800-323-4656
Documents / Resources
|
LUXOR DTWS002 Shop Desk w/Pigeonhole Bin
Unit
[pdf] Instruction Manual
DTWS002 Shop Desk w Pigeonhole Bin Unit, DTWS002, Shop Desk w Pigeonhole Bin
Unit, Desk w Pigeonhole Bin Unit, Pigeonhole Bin Unit, Bin Unit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>