KENDAL LIGHTING PF265-1LPE Design Lighting Instructions
- July 15, 2024
- KENDAL LIGHTING
Table of Contents
KENDAL LIGHTING PF265-1LPE Design Lighting
Product Specifications:
- Brand : Kendal Lighting Inc.
- Model : PF265-1LPE
- Color Temperatures : 3000K, 4000K, 5000K
- Dimmer Compatibility : Standard Triac forward phase dimmer
- Recommended Dimmers : Lutron MACL-153M, Lutron DVCL-153P, Lutron SCL-153P
- Maximum Wattage : 150 watts
Product Usage Instructions
- Fixture Unpacking:
- Unpack the fixture and ensure you have all the components listed in the manual.
- Adjusting Color Temperature:
- This fixture is 3CCT selectable with default color temperature at 3000K. You can switch to 4000K or 5000K by sliding the switch.
- Adjusting Fixture Length:
- Before ceiling installation, adjust the fixture length by pushing the wire up into the canopy and coiling up excess wire. Minor adjustments can be made post-installation.
- To lower or lengthen the wire, depress the button sleeve located at the wire exit point on the canopy.
- Electrical Connections:
- All electrical connections should be done by a qualified electrician.
- Ensure to follow safety instructions and disconnect power at the circuit breaker or unplug from the wall outlet before servicing.
- Dimmer Compatibility:
- This fixture is designed to dim with a standard Triac forward phase dimmer.
- Recommended dimmers include Lutron MACL-153M, Lutron DVCL-153P, Lutron SCL-153P, or other compatible LED dimmer controls.
- Make sure the total wattage does not exceed 150 watts for a 600-watt dimmer. Dimming levels will vary by dimmer.
Safety Instructions
CAUTION : All electrical connections should be done by a qualified electrician.
- Follow and save these instructions.
- Always disconnect power at circuit breaker or unplug from wall outlet before servicing.
Unpack your fixture, you should have the following items:
Fixture with mounting plate attached to the canopy.
Parts bag:
Remove the mounting plate from the canopy. This fixture is a 3CCT selectable model. Default color temperature is 3000K. You can shift to 4000K or 5000K by sliding the the switch.
Before installation to ceiling, adjust fixtures to desired length by pushing wire up into canopy, then coiling up excess wire, minor adjustments can be made after installation. To lower of lengthen wire, depress button sleeve located where wire comes out of canopy.
INSTRUCTIONS
Attach the mounting plate to the junction box with the junction box screws provided.
Connect the GROUND WIRE from junction box to GROUND (or GREEN) wire from fixture with a wire nut. Connect the NEUTRAL WIRE from junction box to NEUTRAL (WHITE) wire from fixture with a wire nut. Connect the LINE WIRE from junction box to LINE (BLACK) wire from fixture with a wire nut.
Install the canopy to mounting plate with the screws provided.
This fixture is designed to dim with a standard Triac forward phase dimmer.
Recommended dimmers:
Lutron MACL-153M, Lutron DVCL-153P, Lutron SCL-153P. Or other compatible LED
dimmer controls. Wattage should not exceed 150 watts of product for a 600 watt
dimmer. Dimming levels will vary by dimmer.
FAQ
Q: Can I install this fixture without a qualified electrician?
A: It is recommended to have all electrical connections done by a
qualified electrician for safety reasons.
Q: How do I adjust the color temperature of the fixture?
A: You can switch between color temperatures (3000K, 4000K, 5000K) by
sliding the switch on the fixture.
Q: What dimmers are compatible with this fixture?
A: The fixture is compatible with standard Triac forward phase dimmers
such as Lutron MACL-153M, Lutron DVCL-153P, Lutron SCL-153P, or other
compatible LED dimmer controls.