ATEN VS1824KIT Video Splitter HDMI User Manual

ATEN VS1824KIT Video Splitter HDMI User Manual

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this manual are subject to change without prior notification by the manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer’s software described in this manual is sold or licensed as is.  Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It is the responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.

Product Information

For information about all ATEN products and how they can help you connect without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller. Visit ATEN on the Web for a list of locations and telephone numbers:

Package Contents

Check to make sure that all the components are in working order. If you encounter any problem, please contact your dealer.

VS1824KIT Package Contents

• 1 VS1824T 4-Port 4K HDMI Cat 6 Splitter
• 4 VE1821R 4K HDMI Cat 6 Receivers
• 1 IR blaster cable
• 4 IR receiver cables
• 1 mounting kit
• 1 power cord and power adapter
• 1 user instructions

VS1828KIT Package Contents

• 1 VS1828T 8-Port 4K HDMI Cat 6 Splitter
• 8 VE1821R 4K HDMI Cat 6 Receivers
• 1 IR blaster cable
• 8 IR receiver cables
• 1 mounting kit
• 1 power cord and power adapter
• 1 user instructions

Overview

The VS1824KIT / VS1828KIT is a kit that includes 1 splitter and 4 / 8 receivers, distributing an HDMI source at up to 4K @ 30 Hz (4:4:4) to 4 / 8 displays up to 40m away via a single Cat 6 cable. The system also supports lossless digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus & DTSHD Master Audio. Only one power adapter for the splitter is needed as a result of the receivers being powered by the splitter thanks to the Power over Cable (PoC) functionality, which also helps avoid cluttered cable installation. An HDMI local output port is built on the splitter for content monitoring or cascading purposes. Moreover, the splitter contains a useradjustable EDID switch, enabling users to  configure the output video resolutions and audio capabilities for seamless integration across the system.
The receiver’s ultra lightweight, palm-sized enclosure ensures flexible installation including mounting and placement in tight spaces. The kit comes with 1 IR blaster cable for the splitter and 4 / 8 IR receiver cables for receivers, allowing users to remotely control the source device from the receiver side. With plug-and-play operation, no software is required, enabling easy, immediate installation. The VS1824KIT / VS1828KIT delivers excellent AV transmission quality and installation flexibility within different installation scenarios, from meeting facilities, retail settings, showrooms, entertainment systems, and more.

Features

• A kit that includes 1 splitter and 4 / 8 receivers to distribute 1 HDMI source to 4 / 8 displays up to 40m away via a single Cat 6 cable
• Supports up to 4K @ 30 Hz (4:4:4) for crystal-clear video presentation
• Supports lossless digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus & DTS-HD Master Audio
• HDMI (3D, Deep Color, 4K); HDCP 1.4 compliant
• Power over Cable (PoC) functionality from splitter to receivers to avoid cluttered cable installation
• HDMI local output port on splitter for content monitoring or cascading purposes
• User-adjustable EDID switch on splitter for output video resolutions and audio capabilities configuration
• VE1821R’s ultra lightweight, palm-sized case enables flexible installation including mounting and placement in tight spaces
• One-way IR channel for remote control of the source device from the receiver side
• Built-in 4KV/8KV ESD protection
• Plug-and-play — no additional software needed

Requirements

The following equipment is required for a complete VS1824KIT / VS1828KIT installation:

Source Device
The following equipment must be installed on any source of HDMI content:

• HDMI output connector

Receiving Device

• A local display device with an HDMI input connector
• Four (applicable for VS1824KIT) or eight (applicable for VS1828KIT) display devices with an HDMI input connector

Cables

• Standard HDMI cables for the source device and local display device
• To ensure video quality, ATEN recommends using a Cat 6 cables for the VE1821R receivers

Note

1. No cables are included in this package. ATEN strongly recommends the use of high-quality cables of appropriate lengths to avoid any audio and video display quality issue in different environments (i.e.  Shielded Cat 6 cables). Contact your dealer to purchase the correct cable sets.
2. For best results, ATEN recommends using the ATEN 2L-2910 Cat 6 cable.
3. A DVI/HDMI adapter is required when connecting to a DVI source or display device. If a DVI/HDMI adapter is used, audio is not supported.

Components

VS1824KIT
VS1824T
VS1824T Front View

**VS1824T Rear View

**

is up and running.
2| link ports| Connects to the VE1821R receivers’ link ports via the Cat 6 cables.
3| HDMI output port| Connects to an HDMI-enabled display via an HDMI cable.
4| HDMI input port| Uses an HDMI cable to connect your HDMI source device to the unit.
5| IR output port| Connects with the supplied IR blaster cable to emit the IR signal for source equipment by receive the IR signal from the IR input port of the connected VE1821Rreceiver.
6| EDID switch| Uses the EDID switch to configure the output video resolution and audio capabilities. See , page 10, for details.
7| firmware upgrade port| Connects to a PC via a Mini-A cable for firmware upgrade.
8| DC power jack| Connects to the supplied power adapter.
No.| Component| Description
---|---|---
9| power switch| This is a standard rocker switch that powers the unit on and off.

VE1821R Front View

**VE1821R Rear View

**

**VS1828T Front View

**

**VS1828T Rear View

**

is up and running.
2| link ports| Connects to the VE1821R receivers’ link ports via the Cat 6 cables.
3| HDMI output port| Connects to an HDMI-enabled display via an HDMI cable.
4| HDMI input port| Uses an HDMI cable to connect your HDMI source device to the unit.
5| IR output port| Connects with the supplied IR blaster cable to emit the IR signal for source equipment by receive the IR signal from the IR input port of the connected VE1821Rreceiver.
6| EDID switch| Uses the EDID switch to configure the output video resolution and audio capabilities. See , page 10, for details.
7| firmware upgrade port| Connects to a PC via a Mini-A cable for firmware upgrade.
8| DC power jack| Connects to the supplied power adapter.
9| power switch| This is a standard rocker switch that powers the unit on and off.

**VE1821R Front View

VE1821R Rear View

**

Hardware Setup

1. Important safety information regarding the placement of this device is provided on page 15. Please review it before proceeding.
2. Make sure that the power to all devices connected to the installation are turned off.
3. Make sure that all devices you will be installing are properly grounded.

Installation

_Refer to the installation diagram (the numbers in the diagram correspond to the numbers of the steps) and do the following

_

Note : A V51824T splitter is used as an example to illustrate the installation. As for V51828T splitter, It is equipped with 8 link ports for connecting up to 8 VE1821R receivers 

Note:

1. Only connect VS1824T/VS1828T with VE1821R. Connecting VS1824T/VS1828T with other receiver models or third-party receivers may cause physical damage to the receiver.

2. Make sure all the equipment you are connecting to the unit is turned off and disconnected from the power source

3. Use an HDMI cable to connect your HDMI source device to the VS1824T/ VS1828T.

4. Use HDMI cables to connect HDMI-enabled displays to the VS1824T/ VS1828T and VE1821R’s HDMI output ports.

5. Use Cat 6 cables to connect the VS1824T/VS1828T splitter and VE1821R receivers’ link ports.
   Note : You can connect a VS1824T splitter with up to four VE1821R receivers, and a VS1828T splitter with up to eight VE1821R receivers.

6. (Optional) Connect the supplied IR receiver cables to the VE1821R receivers’ IR input ports.

7. (Optional) Connect the supplied IR blaster cable to the IR output port of  the VS1824T / VS1828T. The IR signal is from the IR input port of the connected VE1821R.

8.  (Optional) To upgrade the firmware of the VS1824T / VS1828T, use a mini USB cable to connect the firmware upgrade port to a PC.
   Note: This firmware upgrade procedure is only for VS1824T / VS1828T. For more details, please contact the local technical support.

9.  Connect the power adapter to the DC power jack of VS1824T / VS1828T. Fasten the locking connector to prevent accidental disconnection.

10. Turn on the power switch. The VE1821R receivers receive power from the VS1824T / VS1828T splitter via the connected Cat 6 cable by its PoC capability.

11. Power on all the connected devices.

Overview

Extended Display Identification Data (EDID) is a data format that contains a display’s basic information and is used to communicate with the video source/system. The VS1824T / VS1828T equips an EDID switch on the unit’s rear side for users to regulate the output video resolutions and audio capabilities configuration

EDID Configuration

The VS1824T / VS1828T offers an easy and flexible EDID Mode selection method using the EDID switch. To configure the output video resolution and  audio capabilities, set the EDID switch as described in the following table.
Note: “1” represents the pole is in the up position, and “0” means it is downward. The default setting is 1011.

Switch Setting| Position of Individual Pole| EDID Mode Description
---|---|---
Video| Audio
0000| 1
0
| 1080p| 2-channel audio
0001| 1
0
| 1080p| Dolby / DTS 5.1
0010| 1
0
| 1080p| HD audio
0011| 1
0
| 1080i| 2-channel audio
Switch Setting| Position of Individual Pole| EDID Mode Description
---|---|---
Video| Audio
0100| 1
0
| 1080i| Dolby / DTS 5.1
0101| 1
0
| 1080i| HD audio
0110| 1
0
| 3D, 1080p| 2-channel audio
0111| 1
0
| 3D, 1080p| Dolby / DTS 5.1
1000| 1
0
| 3D, 1080p| HD audio
1001| 1
0
| 4K at 30Hz| 2-channel audio
1010| 1
0
| 4K at 30Hz| Dolby / DTS 5.1
1011| 1
0
| 4K at 30Hz| HD audio
1100| 1
0
| Copy the EDID settings of the display connected to the VS1824T / VS1828T splitter’s HDMI output port.
1101| 1
0
| 720p| 2-channel audio
1110| 1
0
| 720p| Dolby / DTS 5.1
1111| 1
0
| 720p| HD audio

Safety Instructions

General

• Read all of these instructions. Save them for future reference.
• Follow all warnings and instructions marked on the device.
• This product is for indoor use only.
• Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.
• Do not use the device near water.
• Do not place the device near, or over, radiators or heat registers.
• The device cabinet is provided with slots and openings to allow for adequate ventilation. To ensure reliable operation, and to protect against overheating, these openings must never be blocked or covered.
• The device should never be placed on a soft surface (bed, sofa, rug, etc.) as this will block its ventilation openings. Likewise, the device should not be placed in a built in enclosure unless adequate ventilation has been provided.
• Never spill liquid of any kind on the device.
• Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
• The device should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
• The device is designed for IT power distribution systems with 230V phaseto-phase voltage.
• To prevent damage to your installation it is important that all devices are properly grounded.
• The device is equipped with a 3-wire grounding type plug. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not attempt to defeat the purpose of the grounding-type plug. Always follow your local/national wiring codes.
• The device is equipped with a DC adapter. This is a safety feature.
• S1814T / VS1818T User Manual 14
• If an extension cord is used with this device make sure that the total of the ampere ratings of all products used on this cord does not exceed the extension cord ampere rating. Make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.
• To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or un-interruptible power supply (UPS).
• Position system cables and power cables carefully; Be sure that nothing rests on any cables.
• Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out parts resulting in a risk of fire or electrical shock.
• Do not attempt to service the device yourself. Refer all servicing to qualified service personnel.
• If the following conditions occur, unplug the device from the wall outlet and bring it to qualified service personnel for repair.
• Liquid has been spilled into the device.
• The device has been exposed to rain or water.
• The device has been dropped, or the cabinet has been damaged.
• The device exhibits a distinct change in performance, indicating a need for service.
• The device does not operate normally when the operating instructions are followed.
• Only adjust those controls that are covered in the operating instructions. Improper adjustment of other controls may result in damage that will require extensive work by a qualified technician to repair.

Rack Mounting

• Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack.
• Always load the rack from the bottom up, and load the heaviest item in the rack first.
• Make sure that the rack is level and stable before extending a device from the rack.
• Use caution when pressing the device rail release latches and sliding a device into or out of a rack; the slide rails can pinch your fingers.
• After a device is inserted into the rack, carefully extend the fail into a locking position, and then slide the device into the rack.
• Do not overload the AC supply branch circuit that provides power to the rack. The total rack load should not exceed 80 percent of the branch circuit rating.
• Make sure that all equipment used on the rack – including power strips and other electrical connectors – is properly grounded.
• Ensure that proper airflow is provided to devices in the rack.
• Ensure that the operating ambient temperature of the rack environment does not exceed the maximum ambient temperature specified for the equipment by the manufacturer
• Do not step on or stand on any device when servicing other devices in a rack.
• Caution: Slide/rail (LCD KVM) mounted equipment is not to be used as a shelf or a work space.

Technical Support

International

• For online technical support – including troubleshooting, documentation, and software updates: http://eservice.aten.com
• For telephone support, see Telephone Support, page iv:

North America

http://www.aten-usa.com/support
Telephone Support| 1-888-999-ATEN ext 4988

When you contact us, please have the following information ready beforehand:

• Product model number, serial number, and date of purchase.
• Your computer configuration, including operating system, revision level, expansion cards, and software.
• Any error messages displayed at the time the error occurred.
• The sequence of operations that led up to the error.
• Any other information you feel may be of help

Specifications

VS1824KIT

Video Input

Video Output

Video

Audio

Control

IR Channel| 1 × Mini Stereo Jack Female (Black)(Refer to Note 1, page 18.)| 1 × Mini Stereo Jack Female (Black)(Refer to Note 1, page 18.)
---|---|---

Connectors

Jack (Black) with locking
Maintenance| N/A| Micro USB for F/W upgrade

Switches

Environmental

Physical Properties

without bracket)
Dimensions (L x W x H) without bracket| 5.75 x 6.80 x 1.65 cm| 21.0 x 8.20 x 1.80 cm

Note:

1. The IR channel of the receiver is a unidirectional bypass channel, transmitting data from receiver to transmitter.
2. The maximum power consumption assumes that all receivers in the package are installed.

Video Input

Video Output

Video

Audio

Control

IR Channel| 1 × Mini Stereo Jack Female (Black)
(Refer to Note 1, page 20.)| 1 × Mini Stereo Jack Female (Black)
(Refer to Note 1, page 20.)
---|---|---

Connectors

Jack (Black) with locking
Maintenance| N/A| Micro USB for F/W upgrade

Switches

Environmental

Physical Properties

without bracket)
Dimensions (L x W x H) without bracket| 5.75 × 6.80 × 1.65 cm| 29.5 × 8.20 × 1.80 cm

Note:

1. The IR channel of the receiver is a unidirectional bypass channel, transmitting data from receiver to transmitter.
2. The maximum power consumption assumes that all receivers in the package are installed.

ATEN Standard Warranty Policy

Limited Warranty

ATEN warrants its hardware in the country of purchase against flaws in materials and workmanship for a Warranty Period of two [2] years (warranty period may vary in certain regions/countries) commencing on the date of original purchase. This warranty period includes the LCD panel of ATEN LCD KVM switches. For UPS products, the device warranty is two [2] years but battery is one [1] year. Select products are warranted for an additional year (see A+ Warranty for further details). Cables and accessories are not covered by the Standard Warranty.
What is covered by the Limited Hardware Warranty
ATEN will provide a repair service, without charge, during the Warranty Period. If a product is detective, ATEN will, at its discretion, have the option to (1) repair said product with new or repaired components, or (2) replace the entire product with an identical product or with a similar product which fulfills the same function as the defective product. Replaced products assume the warranty of the original product for the remaining period or a period of 90 days, whichever is longer. When the products or components are replaced, the replacing articles shall become customer property and the replaced articles shall become the property of ATEN.
To learn more about our warranty policies, please visit our website:
http://[www.aten.com](http://www.aten.com)/global/en/legal/policies/warranty- policy/

ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other brand names and trademarks are the registered property of their respective owners.

References

• eService System
• USA Location information - USA.com
• ATEN - Simply Better Connections | ATEN U.S.A.
• ATEN - Simply Better Connections | ATEN Corporate Headquarters
• Product Warranty | ATEN Corporate Headquarters
• A+ Product Warranty | ATEN Corporate Headquarters
• LCD KVM Switches / Consoles | ATEN Corporate Headquarters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>