SCANSTRUT SC-CW-12F Aura 10W Wireless Charger Installation Guide
- July 12, 2024
- SCANSTRUT
Table of Contents
SC-CW-12F Aura 10W Wireless Charger
“`html
Specifications:
-
Product Name: Magnetic Waterproof Wireless Charger – Aura 11
OOW -
Input Voltage Range: 10-30V DC (12/24V system)
-
Input Current: Max 2A
-
Output Power: Max 110W (9V, 1.1A)
Product Usage Instructions:
1. Electrical Information & Installation Instructions:
Before proceeding with the installation of the Magnetic
Waterproof Wireless Charger – Aura 11 OOW, make sure to read and
understand the provided electrical information and installation
instructions.
2. Installation Steps:
-
Identify a suitable outdoor location for installing the
charger. -
Ensure the input voltage range is within 10-30V DC.
-
Connect the charger to a power source with a maximum input
current of 2A. -
Place the device in a secure and waterproof manner to prevent
damage. -
Verify the output power is within the specified range of 110W
(9V, 1.1A).
3. Charging Process:
To charge a compatible device wirelessly using the Magnetic
Waterproof Wireless Charger – Aura 11 OOW, follow these steps:
- Place the device to be charged on the charger’s surface.
- Ensure proper alignment for effective magnetic connection.
- The charging process will start automatically once the device
is correctly placed.
Frequently Asked Questions (FAQ):
Q: Can this charger be used indoors?
A: The Magnetic Waterproof Wireless Charger – Aura 11 OOW is
designed for outdoor use due to its waterproof features. It is not
recommended for indoor use.
Q: What should I do if the charger is not working?
A: If you encounter issues with the charger not working, check
the power source, connections, and ensure proper alignment with the
device being charged. If problems persist, refer to the
troubleshooting section in the user manual or contact customer
support.
“`
SSCC’AANNSSTTRRUUTT.. outdoor . technologies .
Magnetic Waterproof Wireless Charger – Aura 11 OOW
Electrical information & installation instructtiions.,.
Issue 2
SC–MMAAGG–0011 SC-CW-122F
IMPORTANT
(ENG)) REAAD THESE INSTRUCTIONS BEFORE INSTALLING THE PRODUCCTT..
CONNNAISSANCE DE CES INSTRUCTIONSS.. AVANT DOE
PROCEDEER AA LLJ’INSSTTAALLLAATION.
(DE)) LESEN SIE DIESE ANLEITUNG DURCH,, BEVOR SIE MIT DER INSSTTAALLLAATION
BEGINNEN.
((ESE ) LEAA ESTAS INSTRAUCCIIONES ANTES DE INSTTALAAR EL PRODUCTO.
(FR)) VEUILLEZ PRENDRE
(ITTT) LEEGGERE QUESTE ISTRUZIONI PRIMA DII INSTALLAARE IL PROD0OTTO
(FIN)) LUE NAMA OHJEEET ENNEEN TUOOTTTTEEEEN ASEENTTAAMMIISSTTAA.
(SWWEE)) LAAS DESSAA INSTRUKTlIONEER INNAAN PRODUKTEN INSTTALLLEERRAAS.
Technicall informattion..
Input voltage range
10-30V DC ({121/24V systemm))
Input current mmax 2A
Output powwer mmax 110W (9VV,, 1.1AA))
I Standby powwer ddraw <<00..22WW
Waterproof rating IPPXX66 front and back
Certifications
CE, UKCA,i FCC, IC, ROHS, RRCCMM,, PPSSEE ‘
Parts list
Magnetic Wireless Charger
i
00 Bezel
fil]
No 6 x 3/44″ (19mmm))
SSeellff Tapping CSK llxx441j
Philips Screw
Tools required:
Jigsaw PPoowweerrDrill
Silicone Sealant
PPoozziiPPZZ22 Screwdriver
DOeburrer (Recommenddeedd))
a H
Matteerriial Soft Matteerriial E.g plyywwood Hard Matteerriial E.g Fiberglass
acrryylic, hardwood
Drill bbit (foor ppi1·l10othhoolIees)
No.6 Screw
0022..55mm
(0033//3322″”))
!
0033mmm
(0011//88″11)
I I
I
Installation instruccttiioonnss.
Choose mmoounting
r::-:;.._;J location ensuring there
00 is enough space behind
(‘;;
UUsse thhee teemppllaatee ttoo mmaarrk ccuut lines and ddrriill ppilot hoolles.
mmoounting surface.
00 Cut holes using template and jigsaww..
0 0
Connect to 12/24V suppppllyy,, ensuring a wwaterproof coonnection. Fuse and select ccable ddiameter according to input voltage and ccuurrrent.
0 0
0(‘”; Peel backing off 33M
gasket.
0 © SeccuurreeChhaarrggeerrwwitithhx44NNo.6 6 ((33..55mmmm)) xx 33//44”
((1199mmmm)) SSeellff ttaappppiinngg 6 CSK Philips screws provided. Add
© 0 silicone sealant to screw and holes.
Peel backing off Bezel and stick onto Charger.
i
·· WWAATTER PPAASSSSEESS TTHROUGH CCHHAARRGGEERR
& EENNSSUURREE IITTEEMMSS BBEELLOOWW CCHHAARRGGEERR WWIILLLL NNOOTT BBEE
DDAAMMAAGGEEDD BBYY LLIIQQUUIIDD
SSccaannssttrrut Inc. 7 Pequot Park Road
Westbbrookk, CT
0066449988,,UUSSAA
Sccaannssttrrut Ltd 144 Dart Business Park, Clyst St. George, Exeter
EX3 OOQOH, UK
FForr llatest tteecchh iinnffo vviissiitt:: wwwwww..ssccaannssttrruutt..ccoomm//rrookkkk–wwiirreellesss
Drill x4 holes for No.6 Screws
.,, .,, .,, .,, .,, .,,
~————–~
‘
L
Warning Check Scale
50mm
2″
Scale 1:1 Template. WARNING Check scale is 1:1 before cutting
‘
0′.)
co
“1”
I’–
Ci (“)
E E
E
0
q E
Ci LO
I’– CJ)
I Product Outline
I,.
110.0mm (4.33″)
..
121 .0mm 4.76″
I
I
I
L – – – – – ————————- – – – – – -‘–.-~
I
I
-E,B-
-E,B-
———–
IN EXTREME UUSSAAGE EENNVVIRRONNMMEENNTTS PERFORMANCE MAAY VAARRYY.
This product is designed to securely mount pphones under nnoormmal usage
ccoonnddiittions. The end-user is enttirely responsible for ccoonndditions in
which their ddevice is usedd.. See WARRANTTY section for further ddeettaaiils.
CAAUUTTION: The pproduct is ddesigned specciificcaallly for the charging of
Magsafe ccoommppaattiibble ddevices.
The ccabble mmust be retainedd and not interfere wwith mmecchhaanniiccal
systems.
EENNVVIRROONNMMEENNTTAALL PRROTECTION: Waste electtriccaal pproducts should not bbe ddisposed of wwith household wwaassttee. Please recycclle wwhhere faccilities exist. Check wwith your Local Authoority or rettaaiiler for recyccllingg addvice.
Scanstrut recommends installation is ccarried out by a quuaalified electriccian. No liability is accepted for ddamage and/or injurryy caused bby incorrect installation.
Thiiss pproduct conttains no user serrvviceable commppoonneennttss. Do NOTT
attempt to rreepair or alter the pproduct in any wwaayy..
This pproduct wwiilll charge only wwith Magsafe commppaattiibblle casess..
IMMPPOORRTTAANNTT: Scanstrut Ltdd.. accepts no respoonnssiibbiility for any iinnjuuries or otther ddammages arising from the use of tthheir pproducts in any
WARNIINNGG::
Phone ccases mmay alter overall ccharge pperformmanccee..
ccircummsttancces.
This product is to be connected to a 12VV DC or 2244VV DC bbattterry power sourrce onllyy..
When uused in a very high/low ambbient temppeerature/direct or pprolonged sunlight the pproduct may ttemmppoorraarriily shut ddowwnn,
WARRANTTYY:: A 5 year, nnoonn–ttrraannssffeerabble wwaarranty ccoovers
tthis is a ssafety feature of the electronics. The powwer supply must be switched off bbefore installation.
this Scanstrut pproduct oonly and not any devices that are mmoouuntted in it or on it. No
An apppropprriate ffuuse or ccircuit bbreaker mmust be used bbetwween the battery /I power source and tthis pproductt. Checckk for correct ppoolarity of all wwiring bbefore swwitching
The IIPP ratingg is only valid if ccoorrrectly installed as pper these iinnssttrruuccttiioonnss aanndd oonn aa ppeerrffeeccttllyy ffllaatt,, nnoonn–ppoorroouuss,, ssmmooootthh surface.
wwaarranty is ggiiven for uusers’ ddevices and users expose their devices to hhaazarddss,, kknowwn or unknowwnn, at their owwn riskk..
the ppower on.
When selecting a mmoouuntting loccattiionn, avoid pplaces exposed to
TThhiiss pprroodduucctt mmaayy ccoonnttaaiinn hhiigghh vvoollttaaggeess.. DDoo nnoott ttaammppeerr
heat–radiating apppplliances and ppoooorrly ventilated areas.
wwith the producctt.
EEMMC INNSSTALLATION GUIDELINES:
This pproduct is NOT appproved for use in hazardous/ ffllaammmaabbllee aattmmoosspphheerreess.. DDo NNOOTT iinnssttaallll iinn aa hhaazzaarrddoouuss// flammabble atmmoosspphhere e.g. engine roomm.
Scanstrut pproducts conform to Electromagnetticc Comppattibility (EMC)) regulations, to ensure tthat electromagnetic interference bbetwweeen equipment is mmiinimised.
Before ddrrilling any hoolless,, ensure the area bbehind the mmoouunting
location is cclear of wwiires, fuel and all oother hazardous objects.
EEnsure any holes cut wwilll not significantly wweaken the structure of the
mmoouunting surface. If the pproduct needs to bbe mmoounted outside, it mmust
be mmoouunted in a location safely above the wwaatteerrlline, wwhheere it iIs
not at risk of being submmeerged.
CCoorrect installation is requuiired to ensure tthat electromagnetic
interference is kkept to a mminimum.
WIIRIINGG:: When extending the cabble from bbattery/power source to the
pproducctt, ensure there is coonnssistently a mminimum of 11 00VV being
pprovided to tthe pproducctt. A wwire gauge of 18AAWWG (0.82mmmm22)) is
recommended for any length of cable extension.
The electrical schematic is to illustrate how the pproduct should bbe
connected to a 1122VV DDC or 2244VV DC bbaatttterry/power suppppllyy.
FCC Warning
This device commppllies wwith ppart 15 of the FCC Rules. Operation is subject to the following two ccoonnddiittions:
11)) This ddevice may not ccause harmmffuull interference, and (2)) tthis ddevice mmust accept any interference received, including interference that mmay cause unddesired oppeerration.
Any Changes or mmooddiiffications not expressly appproved by the pparty responnssibblle for commpplliance coouuld void the user’s authority to operate the equipmentt.
This equipment has been tested and found to comply with tthe limits for a
Class B digital device, ppuursuant to ppart 15 of the FCC Rules. These limits
are designed to pprovide reasonable protection against harmful interference
in a residenttiiaall installation. This equipment generates uses and ccan radiate
radio frequency energy and, if not installed and used in accoordance wwith
the instructions, mmay ccause harmful interference to radio ccoommmmuunniiccaattiioonns.
Howweevveerr,, there is no guarantee that interference will not occur in a ppaarticular
installation. If this equipment does cause harmful interference to radio or
television recepttion, which can be determined by ttuurning the equipment off and
on, the user is encoouuraged to trry to coorrect the interference by oone or moore of
the following measuurres:
· ·
Reorient or relocate the receiving antenna..
· ·
Increase the separation betwweeen the equipment and recceeiivveerr..
·
Connect the equipment into an outlet on a ccircuit different from that to
wwhich the receiver is ccoonnnected.
· ·
CCoonsult the dealer or an expperienced radio//TTVV technician for helpp..
FCC RF exposure statement:
The equipment ccoommppllies wwith FCC radiation exposure limits set forth for an unccoonnttrroollled environment. This equipment should be installed and opperated with minimum distance bbetwweeen 20cm tthe radiator your bbooddyy..
FCC ID: 2APUP-SC–MMAAGG–0011
II CC This device ccoonnttaains licence-exempt ttrrannssmmiitttteerr((ss))//rreecceeiivveerr((s) that ccoommpply with Innovation, Science and Economic Development Canada’s licence-exempt RSS((s)).. Oppeeration is subject to the following two ccoonnddiittiioons:
1)) This device may not cause interference..
22)) This device mmust accept any interferenccee,, including interference that
mmay ccause undesiredoperation of the device.
LL”emetteur/recepteur exempt de licence ccoonnttenu ddans le pprresent
appppaarreeiil est ccoonnformes aux CNR d”llnnnnoovvattion, Sciences et
Developpementt economique Canada appppllicabbles aux apppaarreeiils radio
exempts de licennccee.. L’exploitation est autoornisee aux deux coondditions
suivantes : 11)} L’apppaarreeiill ne doit pas pprroodduuiire de
bbrroouuiillllaggee;; 22)) L’apppaarreeiill doit accepter tout broouuiillage
raditoelectrique subbii, mmeme si le bbrroouuiillage est susceptible d”en
ccoommpprroommeettre le fonccttiioonnnemmentt.
IC: 2288336600–SSCCMMAAGG0011 The equipment ccommppllies wwith IC Radiation
expoosure limit set forth for uncoonttrroollled environmentt.. This equipment
should be installed and ooppeerated wwith mminimum distance 10cm bbeettwweeen
the radiator and your bbooddyy..
DDecclaration dd”eexxppoossition RF:
a LL’equipement est ccoonformes a la limits d”eexxppoossiition aux radiations
de la IC
etablie ppoour un environnement non ccoonnttrroolls. GCet equipement doit etre
installs et utilise avec une ddistance mminimales de 11 OO cm entre le
radiateur et votre ccoorrppss..
C( E:~ Scanstrut Ltdd,, decclares tthe pproduct ”MMagnetic Waterproof Wireless
~ CCharger’ SKU:SC-CW-12F is in ccoommpplliiance with EMC CE–RRED Directive
(2014/5533//EEUU)) & sttandard EN 623368. The CE ccerttificate of coonformity
can be found at: wwwww..sccaanstrut.comm//uukk//ccoommppliliaannccee..
/PsUK
DCR
RoHS&
05-01-2024 (Issue 11)
MAGNETTIC WATERPROOF WIRELESS CHARGER – AURA 11 0OW – SC-CW-12F
Installation Instructions
Tools Required
Parts
Jig Saw
Power Drill
Magnetic Waterproof Wireless Charger
Bezel
TTechnical
I
IP Waterproof RRaattiinngg
Input voltage
Input current max Output poowwer max Standbbyy power max CCeerrttiiffiiccaattiioonn
IPX6 FFrroonntt and bbaacck
100–3300VV DC (12/124V Systeemm))
2A 10W (9V 1..11AA)) <0.5W CE,, UKCA, FFCCCC, RROOHS, C-Tick, IC, PSE
Drill bit Ø2.5mm(3/32″)
Ø3mm (1/8″)
Silicone
PZ2 Pozi Screwdriver
No 6 x 3/4″ (19mm) Self Tapping CSK
Philips Screw
&CEJ
RREEAD TTHEE IMPORTANTT SAFFEETTYY INFORMATTION LEAFLET BEFORE INSTALLING.
1 Choose mounting location ensuring there is enough space behind mounting surface.
5 Secure with x4 No6. (3.5mm) x 3/4″ (19mm) Self tapping CSK Philips screws provided. Add silicone sealant to all screw holes.
56mm (2.20″ )
2 Use the template to mark cut lines and drill pilot holes.
Material
Soft Material E.g plywood
Hard Material E.g Fiberglass acrylic, hardwood
No. 6 Screw Ø2.5mm (Ø3/32″) Ø3mm (Ø1/8″)
6 Peel backing off Bezel and stick onto Charger.
3 Cut holes using template and jigsaw.
7 Connect to 12/24V supply, ensuring a waterproof connection. Fuse and select cable diameter according to input voltage and current.
05-01-2024 (Issue 1))
MAGNETIC WATERPROOF WIRELESS CHARGER – AURA 11 0OW – SC-CW-12F
Installation Instructions
Cutting Template
Warning Check SSccale
500mm
L 2″
JI
Print document 11 :: 11 scale for correct cutting template size.
–
–
DDrriill x4 hoolleess for No.6 Sccrewws ———-..:
I
.,I
I
;
., ., ., ————–… ,, +- -_,.__
I
r–
s2, E E E E
r–
72.0mm (2.83″) 95.0mm (3.74″)
PProduct Outline
I
+ + I
L
–
–
–
–
–
–
–
–
–
———–
–
–
—-
–
–
–
–
–
–
–
–
–
–
——
—
111100.0mm (4.33″”)
121.0mmm (4.76″”)
4 Peel backing off 3M gasket.
UK & International +44 (0)1392531280 sales@scanstrut.com
For further installation and warranty information
please visit: www.scanstrut.com
USA +1 860 308 1416 usasales@scanstrut.com
SCANSTRUT.
WATT ER PASSSEES TTHRROOUGH CHARGER ENSURRE ITT EMS BEELOW CHARGER WILL NOT BE DAAMMAGGEED BY LIQUID
UK & International +44 (0)1392531280 sales@scanstrut.com
For further installation and warranty information
please visit: www.scanstrut.com
USA +11 860 308 14166 usasales@scanstrut.com
SCANSTRUT.
ow – Magnetic Waterproof Wireless Charger – Aura 11 0W – SC- CW- 12F Email: sales@scanstrut.com Email: usasales@scanstrut.com
100.5mm (3.95″)
4.6mm (0.18″)
54mm (2.13″)
52mm (2.05″)
125°
7-17mm (0.28-0.67″) Device Thickness
15mm (0.59″)
86mm (3.38″)
124mm (4.88″)
WAATER PASSES THROUGH CHARGER. ENSURE ITEMS BELOW CHARGER WILL
NOT BE DDAAMAGED BY LIQUID
300mm (11.81″)
111100mmm (4.33″”)
Electrical Information:
Input voltage range 100–330VV DC (12/24V system)
Input current max 2A
Output power max 11 0OW (9VV, 11 ..11A)
Standby power draw <<0.2W
Waterproof rating
(Electronics) IPX6 front and back
CCeerrttiiffiiccaattiioonnss
CE, UKCA, FCC, ROHS, IC, C-tick, PSE
Issue 1
Page | A
ow – Magnetic Waterproof Wireless Charger – Aura 11 0W – SC- CW- 12F Email: sales@scanstrut.com Email: usasales@scanstrut.com
Cutting TTemplate
–
Drill x4 holes for No.6 Screws
– – – – – – – –
I I I
,, ,
I
Warning Check Scale
I
500 mm
2″
————–
Print document 11 :: 11 scale
for correct cutting template size
–
8
I
I
CV) r—
8 £2, E E E E
0 0
(r–J- 0)
72.0mm (2.83″ ) 95.0mm (3.74″ )
MMaterial SSooffttMMaterial E.g plywood Hard MMaterial E.g Fiberglass acrylic, hardwood
No.66SScreww Ø02.5mm (Ø03/32″””) Ø03mm (Ø01/8″””)
Product outline
+ + I
L
–
–
–
–
–
–
–
–
–
——————
—
–
–
–
–
–
–
—
—
111100..00mmmm (4.33″”)
12211..00mmmm (4.76″”)
SCANSTRIJT
Issue 11
Page |I B
References
- Mounts, Waterproof Wireless Chargers, Cable Seals for Marine and Outdoor Technology | Scanstrut
- 12/24V Waterproof Wireless Phone Charging Power Boats | Qi Wireless | Scanstrut
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>