edenwood 972157 LED PAR Lamp Instruction Manual

edenwood 972157 LED PAR Lamp

Thank you!
Thank you for choosing this EDENWOOD product. EDENWOOD products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won’t let you down. We’re confident your new device will be a pleasure to use every day! Welcome to ELECTRO DEPOT.

Product Overview

Parts

• A LED lens
• B Power cable with plug (supplied)
• C Adjustment knob
• D Mounting base
• E Control panel
• F DMX OUT connector
• G Display
• H ENTER button
• I DOWN button
• J Metal ring
• K UP button
• L MENU button
• M DMX IN connector
• N Signal cable

Product Overview

• Unpack the product. Remove all the labels from the product. Check that it is complete and in a good condition. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
• Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Specifications

• Model : 972157 – LED LIGHT D20 V2
• Operating voltage: 100-240 V ~, 50/60 Hz
• Power consumption : 48 W
• Light sources : 54x 3 in 1 RGB LEDs
• Beam angle : 25° (10° and 30° optional)
• Command mode : audio activation, auto, master/slave, DMX-512
• DMX channels: 4/8/11/23CH
• Dimmer : 0-100% with a regulated constant color control
• The external surface temperature of the light fitting : 75°C
• Dimensions/Weight : 205 × 205 × 230 mm / 1.25 kg

Product usage

Before first use

• Clean the unit ( Cleaning and maintenance).

Use

To assemble

1. Attach the hanging hook (not included) to the light-mounting base.
2. Hang the hook with the light fixed to the base, then secure the hook in place with a suitable screw and nut (not included). The user should use a safety cable when installing the light’s housing to avoid the risk of dropping the unit. The safety cable’s technical specifications are as follows: 2 mm. No clips or safety cables are provided as accessories.
3. To adjust the beam angle: loosen the adjustment knob. Orient the light to the desired angle. Tighten the knob to secure the product in place.

Note: The appropriate fastening systems vary according to the mounting surface’s composition.

WARNING!

• Always unplug the power plug from the main socket before assembling the product.
• Use a live wire detector to ensure that no electric cables are running behind or through the surface.

Control panel

Item/Function

• Display Indicates the number of the selected mode
• MENU Switches between different modes
• UP Increases the values
• DOWN Decreases the values
• ENTER Confirms the settings

Numerical values indicated on the display

Using an interconnection cable (signal cable) and DMX connector

DMX mode
DMX is an operating mode that enables the unit to be controlled via an external controller. Connect the signal cable from the controller output to the first light’s DMX input.

• Connect another signal cable from the DMX output of the first light to the DMX input of the second light.
• Repeat the above step to connect all the slave lights.
• Connect the last light by connecting the signal cable to the DMX output connector.

Please note: the starting address for this mode must be set.

Master/slave mode
Master/slave is an operating mode that allows one light to act as a master and therefore, control all the other lights as slaves.

• Connect the signal cable to the DMX output connector of the first master light and the DMX input connector of the second slave light.
• Repeat the step to connect all the slave lights.
• Connect the last slave light by connecting the signal cable to its DMX output connector.
• For more information regarding the master and slave mode settings, please refer to the table above.

Please note : only one light can be set as the master.

DMX address settings
Each light should be set with a specific starting address code. The address can be set as indicated below.

• Setting multiple lights with the same address code.
  • The lights will accept DMX512 channel starting signals from the same address code.
  • All connected lights will be controlled together.
• Setting an independent address code for each light.
• Please note: this is an 8-channel light fitting. If the starting address code for the first light is set to 1, then the starting code for the second light should be 9. The third should be 17, and so forth. Follow this rule to set the starting address code for each connected light.

DMX command

Cleaning and maintenance

WARNING!
Always unplug the power plug from the main socket before carrying out any maintenance or cleaning operations. Let everything cool completely.

Cleaning

Please note: we recommend cleaning the product every 2 weeks.

• Unplug the power plug from the main socket.
• Use a vacuum cleaner or an air compressor and a soft brush to remove any dust that has accumulated on the external vents.
• Clean all the lenses with a dilute solution of glass cleaner or isopropyl alcohol using a soft lint-free cloth or a special lens cloth.
• Apply the solution to a rag or piece of cloth and slide the dirt and grime toward the outside of the lenses.
• Gently buff the optical lenses until they are streak and lint-free.
• Never use corrosive cleaners, wire brushes, abrasive scouring pads, or metal/sharp tools to clean your unit.
• Thoroughly dry the unit after cleaning it.
• Store the unit in a cool, dry place, out of the reach of children and pets.

Maintenance

• Check everything regularly and tighten the screws mounted on the light fitting.
• Replace any corroded screws with new ones.
• Check the condition of the surface upon which the light fitting has been installed and whether or not it is still sturdy. Make sure that there are no signs of damage or deformation.
• Check and make sure that the power cable and insulation layer have not been damaged.
• Make sure that all the circuit components have been connected correctly. Perform a thorough lighting inspection every 3 months.

Storage

• Always unplug the unit before storing it.
• Store the unit in a fresh, dry, and dust-free place, out of the reach of children and pets.
• Please retain the packaging and use it to store your unit when it is not in use for an extended period.

WARRANTY CONDITIONS

This product is guaranteed against faults caused by defects in manufacturing or the materials used for two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

• proof of purchase is required.
• ELECTRO DEPOT 1 route de Vendeville 59155 FACHES-THUMESNIL – FRANCE

References

• The domain name edenwood.de is for sale
• Tienda de electrodomésticos y electrónica | ELECTRO DEPOT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>