XTOOL F1 Ultra Conveyor Instruction Manual
- July 12, 2024
- XTOOL
Table of Contents
XTOOL F1 Ultra Conveyor
Specifications
- Product Name : F1 Ultra
- Model Number: D1.2.8_KD010794000
- Size: 1000mm
- Tools Included: Screwdriver
Product Usage Instructions
Safety First
Thank you for choosing xTool products! Safety is a top priority.
Always follow safety guidelines when using the F1 Ultra.
List of Items
The package includes the F1 Ultra machine, screwdriver, and necessary
screws for assembly.
Installation of the Conveyor
To install the conveyor, refer to the installation manual provided. Make
sure to follow the instructions carefully for proper setup.
Processing Materials in Batches
For batch processing with the F1 Ultra, ensure that you use identical
materials. Visit support.xtool.com for detailed instructions on batch
processing.
Processing Large Materials
When processing large materials, ensure that the F1 Ultra is securely set
up and follows the recommended guidelines for material placement and
processing.
After-Sales Services
If you require after-sales services or assistance, visit support.xtool.com
for online help and resources related to the F1 Ultra.
Statement
Thank you for choosing cool products!
- If you use the product for the first time, read carefully all the accompanying materials of the product to improve your experience with it. If you do not use the product according to the instructions and requirements of the Manual, or mis-operate the product due to misunderstanding, etc., the Company shall bear no responsibility for any loss resulting therefrom.
- The Company has collated the content of the Manual rigorously and carefully, but errors or omissions may remain.
- The Company is committed to continuously improving product functions and service quality and therefore reserves the right to change any product or software described in the Manual and the content of the Manual at any time.
- The Manual is intended to help you use the product properly and does not include any description of hardware and software configuration. For product configuration, refer to the related contract (if any) and packing list, or consult your distributor. Images in the Manual are for reference only and the actual product may vary.
- Protected by copyright laws and regulations, the Manual shall not be reproduced or transcribed in any way, be transmitted on any wired or wireless network in any manner, or be translated into any language, or be modified in any way, such as content, image, or layout modification, without the prior written authorization of the Company.
- The Company is committed to continuously improving the product and related materials. The product and the Manual are subject to change, and updates can be found at xtool.com.
Safety first
Read and get familiar with all safety precautions and procedures before using the machine. Ensure that the product is properly installed and strictly follow all safety precautions during operation.
- Check the product for damage every time before you use it. Do not operate it in any way when any damage or defect is found.
- Ensure that the workspace is clean and flat.
- Do not leave the product unattended during operation. Pay attention to whether it is working properly.
- Do not disassemble the product or change its structure in any way without authorization.
- Keep the product away from moisture when using or storing it to prevent rust and corrosion.
- The product works properly at the temperature of 0℃ to 35℃. Do not operate it at a temperature lower than 0℃.
- When you use tool F1 Ultra with the conveyor to process material, the protective enclosure cannot fully cover the material. You need to wear safety goggles that can shield your eyes from 455 nm and 1064 nm laser beams.
- Do not laser cut any materials or laser engrave thin materials permeable to light (such as paper and cloth) on the conveyor. Laser beams falling on the belt will damage it.
- When placing materials during processing, keep your hand away from the processing area to avoid skin injuries.
List of items
Install the conveyor
Process materials
Ensure that you use identical materials.
When placing materials during processing, keep your hand away from the
processing area to avoid skin injuries.
Ensure that the materials do not touch or overlap with each other.
Process
For details about how to use xTool F1 Ultra with the conveyor to process a large material, visit support.xtool.com.
WARNING: When the device processes a large material, laser beams fall
only in the middle line of the conveyor. The material is conveyed from the
right to left, and therefore its part on the left of the middle line will not
be processed.
After-sales services
For technical support, contact us at support@xtool.com.For more information about after-sales services, visit support.xtool.com.
SCANNER
For online help, visit support.xtool.com.
FAQ
- Q: How do I ensure safety while using the F1 Ultra?
- A: Always follow the safety guidelines provided in the manual. Keep hands away from processing areas to avoid injuries.
- Q: Where can I find more information on batch processing with the F1 Ultra?
- A: Visit support.xtool.com for detailed instructions on using the conveyor for batch processing with the F1 Ultra.
References
- xTool Support Center
- xTool Laser | Smart Desktop Laser Cutter and Engraver
- yuque.com/make
- yuque.com/makeblock-help-center-zh
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>