XTOOL KS-1 Toyota Smart Key Simulator User Manual
- June 6, 2024
- XTOOL
Table of Contents
USER MANUAL OF
KS-1 TOYOTA SMART KEY
SIMULATOR
SHENZHEN XTOOLTECH CO., LTD
STEP BY STEP
PROCESS
www.xtooltech.com
SHENZHEN XTOOLTECH CO., LTD
-
Select: Immobilization-TOYOTA-All smart key lost
-
Select “Read immobilizer data” to read vehicle immobilizer data
-
According to the prompt, please press the car’s START button to read the data.
It will show the completion ratio of the read data as below:
-
After reading the data, please save the data and name the saved file after saving, the saved information will be shown as below:
-
When generating the KS-1Toyotasimulator key, please connect KC100 orKC501first( Please noticed the device must be connected to the network). Click the “Generate emulated key” button.
-
And then click OK button to select the file saved in the previous step.
| 
---|--- -
After the document selection is completed, the screen will display the current key type, please click the Yes or No button to confirm whether it is correct.
-
After confirmation, the system will upload data to the Xtool server for data verification and calculation.
-
After verification, it will activate KC100 or KC501.
-
Please put the KS-1simulator card into the KC100’s or KC501’s slot and follow the instructions to complete the next operation.
-
Please click Yes to the next step. (This operation will make device bound with KS-1 Toyota simulator card)
-
Binding succeed.
-
After the binding is successful, the simulator key is generating.
-
Generated successfully.
-
After generating the simulation key successfully, select “Add key” to do add keys.
-
Please follow prompts for relevant operations.
| |
---|---|--- -
The device will prompt Programming success.
USER MANUAL OF
KS-1 TOYOTA SMART KEY
SIMULATOR
PROCESS
SHENZHEN XTOOLTECH CO., LTD
www.xtooltech.com