XTOOL 60921 Floor Parcel Box User Manual
- October 30, 2023
- XTOOL
Table of Contents
XTOOL 60921 Floor Parcel Box
Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments
The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-ual, nor in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop:
https://www.wiltec.de/docsearch
Our postal address is: To return your goods for exchange, repair, or other purposes, please use the following address. Atten-tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
Parts list
Part | Name | Qty. |
---|---|---|
A | Sheet-metal screw | 40 |
B | Fixing screw M4 | 12 |
C | Sealing tape | 1 |
D | Lock | 1 |
E | Support for component 7 | 2 |
F | Fixing screw for component 10 | 2 |
G | Base plate | 1 |
I | Plastic washers for components 9 and 10 | 4 |
J | Floor dowel | 4 |
Assembly
After assembling the components 8 and 7 as well as the components 9 and 10, component 10 is attached on either side to component 1 and 3 with the help of the fixing screw F and component I. Then, components 8 and 9 are connected with each other.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
- E-mail : service@wiltec.info
- Tel : +49 2403 55592-0
- Fax : +49 2403 55592-15
- https://www.XPOtool.com
Item 60921–60924 Page 2 The Tool Experts