THERMALRIGHT PA140 Air Cooler with Water Cooler Fan Installation Guide
- July 11, 2024
- THERMALRIGHT
Table of Contents
INSTALLATION GUIDE
————————————
PEERLESS ASSASSIN 140 Series
Please remove protective sticker before install
Parts List
A Heatsink x1
|
B 120mm Fan x1
|
B1 140mm fan x1
|
LGA115X/1700
C Backplate x1
---|---|---|---
D INTEL Bracket x2
|
E AM4/AM5 Bracket x2
|
F 120mm Fan Clip x2
|
F1 140mm fan Clip x2
G 1200 Standoff x4
|
H LGA20xx Screw x4
|
I Tightening Nut x4
|
AM4/AM5
J standoff x4
AM4/AM5
K Screw x4
|
L Thermal Compound x1
|
M 1700 Standoff x4
|
N Fan Y Cable x1
AMD AM4/AM5
Remove AMD plastic brackets, Keep the back plate, install AM4/AM5 metal brackets with AM4/AM5 screws and AM4/AM5 plastic standoffs
Apply thermal compound on CPU, install the heatsink with a screw driver, and install fans on heatsink with fan clips.
INTEL LGA115X/1200
- 115X position
- 15Xmouning hole
Adjust intel backplate hole position to 115X, then install backplate from backside of motherboard. Install 115X standoffs to backplate screws, then install intel brackets on standoffs with nuts.
Apply thermal compound on CPU, install the heatsink with a screw driver, and install fans on heatsink with fan clips.
INTEL LGA2011/2066
- 2011 mounting hole
Install four Intel LGA20XX screws on motherboard ILM, Install two Intel brackets on LGA20XX screws, secure them with nuts, LGA20XX mounting hole on Intel brackets.
Apply thermal compound on CPU IHS. Secure heatsink on CPU with two nuts on heatsink.
INTEL LGA1700/1851
- 1700 Position
- 1700 mounting hole
Adjust intel backplate hole position to 1700, then install backplate from backside of motherboard. Install 1700 standoffs to backplate screws, then install intel brackets on standoffs with nuts.
Apply thermal compound on CPU, install the heatsink with a screw driver, and install fans on heatsink with fan clips.
FAN WIRING
Insert 4-pin PWM fan connector in CPU_FAN socket on motherboard, use Fan Y Cable to sync fan speed for dual fan setup.
- FAN HEADER
- ARGB LIGHTING HEADER
For Fans with ARGB lighting, To control the ARGB lighting connect ARGB lighting connector(3-pin +5V) to motherboard ARGB lighting socket or ARGB lighting controller, lighting effects can be sync by connecting fan lighting headers with each other
Documents / Resources
|
THERMALRIGHT PA140 Air Cooler with Water Cooler
Fan
[pdf] Installation Guide
PA140 Air Cooler with Water Cooler Fan, PA140, Air Cooler with Water Cooler
Fan, Water Cooler Fan, Cooler Fan, Fan
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>