Ziel Home LGT504A01 Adapter Light Strips User Manual
- July 11, 2024
- Ziel Home
Table of Contents
Ziel Home LGT504A01 Adapter Light Strips
Product Information
Specifications
- Model: LGT504A01
- Control: Switch or Remote Control
- Color Temperature Range: 3000K-6000K
- Brightness Levels: 8 Gears
Product Usage Instructions
Using Switch Control
Short press on the key to cycle through the light settings: 3000K, 4500K, 6000K, and off.
Long press the power button to adjust brightness (+/-).
Using Remote Control
- Short press ON/OFF button to increase brightness (8 gears), long press for continuous dimming.
- Short press to decrease brightness (8 gears).
- Short press to adjust color temperature from 6000K to 3000K (8 gears), long press for linear adjustment.
- Short press to adjust color temperature from 3000K to 6000K (8 gears), long press for linear adjustment.
Notes
During use, if the switch can function normally but the remote control cannot
function properly, a code matching operation needs to be performed.
If the light is disturbed by other remote controls or cannot be remotely
controlled. Before executing code matching, please turn off the power before
turning it on.How to perform code matching operation: Within 5 seconds of
turning on the power, press and hold the start button on the remote control
for 3 seconds, and the light strip will flash 3 times, indicating that the
code (remote control) matches.
FAQ
Q: Can the device be used in portable exposure conditions?
A: Yes, the device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>