Ziel Home Furnishing Technology Co Ltd LBT020-2 Apache POI Remote Control Instructions

Ziel Home Furnishing Technology Co Ltd LBT020-2 Apache POI Remote Control

Product Information

Specifications

• Version: 1
• Remote Control Instructions:
  • Short press once to turn the light on or off.
  • Short press once to increase the brightness level.
  • Short press once to decrease the flashing rate of the light.
  • Short press once to increase the flashing rate of the light.
  • Short press once to decrease the brightness level.
  • Short press once to cycle through 7 light colors in the following order: White, Red, Yellow, Green, Blue, Cyan, Pink.
  • Short press once to cycle through 3 light modes: Static,Breathe, and Slow Flash.

Product Usage Instructions

1. To turn the light on or off, short press the designated button on the remote control.
2. To adjust the brightness level, short-press the corresponding button to increase or decrease it.
3. To change the flashing rate of the light, use the respective buttons for increasing or decreasing the rate.
4. You can cycle through 7 different light colors by short-pressing the color cycle button.
5. To switch between the 3 available light modes, short-press the mode selection button.

Specification

1. Switch key
2. Brightness brightening
3. Slow down
4. Speed up
5. Brightness down
6. Color adjustment
7. Mode switching

Remote Control Instructions

Version 1

• Button ①: Short press once to turn the light on or off.
• Button ②: Short press once to increase the brightness level.
• Button ③: Short press once to decrease the flashing rate of the light.
• Button ④: Short press once to increase the flashing rate of the light.
• Button ⑤: Short press once to decrease the brightness level.
• Button ⑥: Short press once to cycle through 7 light colors in the following order: White, Red, Yellow, Green, Blue, Cyan, Pink.
• Button ⑦: Short press once to cycle through 3 light modes: Static, Breathe, and Slow Flash.

Version 2 (Added the title of the button)

• Power Button (Button ①): Short press once to turn the light on or off.
• Brightness+ (Button ②): Short press once to increase the brightness level.
• Speed- (Button ③): Short press once to decrease the flashing rate of the light.
• Speed+ (Button ④): Short press once to increase the flashing rate of the light.
• Brightness- (Button ⑤): Short press once to decrease the brightness level.
• Color Change (Button ⑥): Short press once to cycle through 7 light colors in the following order: White, Red, Yellow, Green, Blue, Cyan, Pink.
• Mode Change (Button ⑦): Short press once to cycle through 3 light modes: Static,Breathe, and Slow Flash.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FAQs

Q: How do I change the batteries in the remote control?
A: To change the batteries in the remote control, locate the battery compartment usually at the back of the remote. Open it and replace the old batteries with new ones following the correct polarity.

Q: What do I do if the light is not responding to the remote control?
A: Make sure that there are fresh batteries in both the light unit and the remote control. Check for any obstructions between the remote and the light unit that may be blocking the signal. Try repositioning the remote control closer to the light unit.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>