MUNBYN A40 Portable Thermal Printer User Manual
- June 14, 2024
- MUNBYN
Table of Contents
MUNBYN A40 Portable Thermal Printer
Product Sketch
Power Indicator Status
- Green light on: Normal use status/full charged.
- Red light on: Cover opened/No paper/Over-heat/Charging.
- Green light flashing: Paper suction mode, please install the folded paper.
- Red light flashing: Low battery. please charge in time.
Mobile App Printing
- Step 1 : Press and hold the power button for 2 seconds to turn on the printer.
- Step 2 : Search (PeriPage) and download PeriPage App in the mobile app store.
- Step 3: Open the APP and the Bluetooth on mobile, and search for the connected printer according to the prompts in the App.Or double click the power button to print the QR code, and scan the code with the App toconnect to the printer. (Tips: Don’t connect printer in the mobile phone Bluetooth settings.)
- Step 4 : Select and edit the content to be printed in the App, confirm and print. App download: Search for [PeriPage) on Google Play or App Store, or scan the following QR code to
App download : Search for (PeriPage) on Google Play or AppStore, or scan the following QR code to download ADD
Computer Printing
- Step 1: Press and hold the power button for 2 seconds to turn on the printer.
- Step 2: Connect the printer to computer with the original type-C data cable.
- Step 3: Visit the official website http://upc.cd/zEYotalk to download and install printer driver.
- Step 4: When printing the required documents, select the printer to print.
Replace Paper
- Open The Cover
- Put Paper
- Close The Cover
Folding paper installation guide
(Make sure there is no roll paper in the printer)
Paper Holder Installation/Removal
Charging Instructions
- 5V – 2A input, recommend to use mobile phone charger for charging.
- Recommend to charge the battery fully before using.
- Please charge it every 3 months if you don’t use it for a long time, to avoidi Caution! the long time natural loss of lithium battery and can not be charged.
Clean The Printer Head
- Please turn off the printer and open the printer cover and take out the paper.
- Dip seton the rioton swab with medical acon, alta vipe tenty along the center to the periphery of the printer head.
- After cleaning the printer head, do not use the printer immediately. Please wait for 1 to 2 minutes, use the printer after the alcohol has completely evaporated.
Tips
- Operating ambient: 5°C-40°C ambient
- temperature, 45%-90%RH.
- (Non condensing state).
Caution!
This is a Class A product. It may cause radio interference in the living
environment. In this case, users may need to take actions against
interference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>