ZEBRA DS4608 Digital Scanner User Guide

ZEBRA DS4608 Digital Scanner

Copyright

• ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2019 Zebra Technologies Corporation and/or its affiliates. All rights reserved.
  COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/copyright.

• WARRANTY: For complete warranty information, go to www.zebra.com/warranty.

• END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula.

For Australia Only

• For Australia Only. This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
• Zebra Technologies Corporation Australia’s limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Zebra Technologies Corporation at +65 6858 0722. You may also visit our website: www.zebra.com for the most updated warranty terms.

Terms of Use

Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties forany other purpose without the express, written permission of Zebra Technologies.

Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice.

Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct;however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom.

Limitation of Liability

In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of theaccompanying product (including hardware and software) be liable for any damages whatsoever (including,without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusionor limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Features

Presentation Mode

Connect Host Interface

USB

The imager automatically detects the host interface type and uses the default setting. If the default(*) does not meet your requirements, scan another host barcode below.

RS-232

The imager automatically detects the host interface type and uses the default setting. If the default(*) does not meet your requirements, scan another host barcode below.

IBM 46XX

The imager automatically detects the host interface type, but there is no default setting. Scan one of the barcodes below to select the appropriate port .

Keyboard Wedge

The imager automatically detects the host interface type and uses the default setting. If the default(*) does not meet your requirements, scan the IBM PC/AT and IBM PC COMPATIBLE barcode below.

Set Defaults

Add a Tab Key

To add a Tab key after scanned data, scan the barcode below.

Add an Enter Key {Carriage Return /Line Feed)

To add an Enter key after scanned data, scan the barcode below.

USB Caps Lock Override

Scanning

Hand-Held Aiming

User Indications By Default

123Scan

123Scan is an easy-to-use, PC-based software tool that enables rapid and easy customized setup of a scanner via a barcode or USB cable. For more information, visit: www.zebra.com/123Scan.

Utility Functionality

• Device configuration
  • Electronic programming (USB cable)
  • Programming barcode(s)
• Data view – scan log (display scanned barcode data)
• Access asset tracking information
• Upgrade firmware and view release notes
• Remote management (SMS package generation).

Troubleshooting

Recommended Usage Guide

Alternate left and right hands taking breaks and task rotation recommended.

Health and Safety Recommendations

Ergonomic Recommendations

Caution : In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.

Regulatory Information

• This device is approved under Zebra Technologies Corporation.
• This guide applies to Model Number DS4608.
• All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required.
• Local language translations are available at the following website: www.zebra.com/support.
• Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment.
• Declared maximum operating temperature: 50°C.

LED Devices

• Classified as ‘EXEMPT RISK GROUP’ according to IEC 62471:2006 and EN 62471:2008. Pulse duration: 15.2 ms

Power Supply

Use only a Zebra approved, certified LPS power supply rated 5.2Vdc, Min. 1.1A, 50 Deg. C. Use of any alternative power supply will invalidate the product warranty and may be dangerous.

Radio Frequency Interference Requirements

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements – Canada

Innovation, Science and Economic Development Canada ICES-003. Compliance Label: CAN ICES-3 (B)/NMB-3(8).
Marking and European Economic Area (EEA)

Statement of Compliance
Zebra hereby declares that this device is in compliance with all the applicable Directives, 2014/30/EU, 2014/35/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address:
www.zebra.com/doc.
Japan (VCCI) – Voluntary Control Council for Interference
Class BITE
This table was created to comply with China RoHS requirements.

Eurasian Customs Union
TURKISH WEEE Statement

Waste Electrical and Electronic Equipment (WEEE)

For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: www.zebra.com/weee.

BSR idware GmbH Jakob-Haringer-Str.3 A-5020 Salzburg
https://www.bsr.at
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>