CONAIR HS800 Hot Roller Set User Guide

: July 10, 2024
: ConAir

Table of Contents

CONAIR HS800 Hot Roller Set
Product Usage Instructions
FAQ
IMPORTANT SAFETY INSTRUCTIONS
STORAGE
HOW TO CURL YOUR HAIR
GETTING TO KNOW YOUR HAIR SETTER
8-ROLLER HAIR SETTER
LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CONAIR HS800 Hot Roller Set

Specifications

Soft flocking layer
Aluminum heating core
Super clip

Product Usage Instructions

How to Curl Your Hair

Place ends of hair on a roller and wind toward the scalp. Roll hair up firmly and secure the roller with a super clip, crossing over the roller.
The firmness of the curl is regulated by the length of time the roller is left in your hair.
For a tighter curl, leave rollers in the hair for at least 10 minutes before removing them. For soft, wavy curls, remove rollers after a shorter period.
Removing rollers: Hold the roller in one hand while removing the clip with the other. Gently drop the roller (DO NOT PULL) and let the curl bounce back after the roller has been completely removed.
- Repeat with the remaining rollers. Let hair cool for one minute to set, and then style your hair into a look that lasts for hours.

The Ionizing Function

NOTE: The unit may produce a clicking sound at times. This is normal for a high-output ion generator.

User Maintenance

Your hair setter is designed for household use and is virtually maintenance-free. If cleaning becomes necessary, disconnect the appliance from the power source, allow the setter to cool, then clean the unit and heat metal radiator heating strips with a cloth.
Clean rollers with a damp cloth and mild detergent if needed. If any abnormal condition occurs, unplug the hairsetter and return it to an authorized service representative for repair.

Storage

Allow the hair setter to cool before storing. Handle the cord carefully to prolong its life; avoid jerking or straining at plug connections. Place the hairsetter out of reach of children in a safe, dry location.

FAQ

Q: What should I do if the hair setter is not working properly?

A: If the hair setter is not working properly, do not operate it.
Return the appliance to an authorized service center for examination and repair.

For your safety and continued enjoyment of this product, always read the instruction book carefully before using it.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER
DANGER – To reduce the risk of electric shock.

Always unplug this appliance immediately after using it.
Do not use it while bathing or in the shower.
Do not place or store appliances where they can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquids.
Do not reach for an appliance that has fallen into the water. Unplug immediately.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons.

An appliance should never be left unattended when plugged in.
Do not pull, twist, or wrap the line cord around the appliance.
Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
Use this appliance only for its intended use as described in the manual. Do not use attachments not recommended by Conair.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
Keep the cord away from heated surfaces.
Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
Never use it while sleeping.
Never drop or insert any object into any opening or hose.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not use an extension cord with this appliance.
Center of rollers will be hot – hold rollers by ends to roll hair.
Use a hair setter on a level surface.
Do not touch the metal radiator strips that hold the rollers – they are hot.
This appliance is not a toy. Keep away from children.
For household use only.

How to operate your hair setter:

Place the hairsetter on a firm, flat surface. With the lid closed, plug a cord into an outlet. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Hairsetter has a slide switch for power control. Slide the switch to your desired setting (High or Low). The red light will go on and the rollers will heat up quickly. Rollers are ready to use when the ready dot on one of the rollers turns transparent white.
- Note: Allow rollers to heat with the lid closed, as this will provide the fastest, most efficient heat-up.
Once the rollers reach the desired temperature, you can begin setting your hair. For tighter curls, allow rollers to heat longer. Never leave your hairsetter on and unattended. Always unplug the hairsetter when not in use. Allow the hairsetter to cool down after use, and store it in a safe place.
Hair should be clean and dry or slightly damp – never wet – when setting. Please see HOW TO CURL YOUR HAIR for further instructions.

USER — MAINTENANCE

Your hairsetter is designed for household use and is virtually maintenance-free. This product represents the highest standards of workmanship and engineering research.
If cleaning becomes necessary, disconnect the appliance from the power source. Allow the setter to cool. Clean the unit and the heating metal radiator heating strips with a cloth.
Occasionally, you may want to clean your rollers. Use a damp cloth and mild detergent or soap. If any abnormal condition occurs, unplug the hairsetter, allow it to cool, and return it to an authorized service representative for repair.

STORAGE

Allow the hairsetter to cool. Handle the cord carefully to prolong its life; avoid jerking or straining at plug connections. Place the hairsetter out of reach of children in a safe, dry location.

HOW TO CURL YOUR HAIR

Place ends of hair on a roller and wind toward the scalp.
- Roll hair up firmly, and secure the roller with a super clip, crossing over the roller.
The firmness of the curl is regulated by the length of time the roller is left in your hair.
For tighter curl, leave rollers in hair for at least 10 minutes before removing. For soft, wavy curls, remove rollers after a shorter time.
Removing rollers: Hold the roller in one hand while removing the clip with the other. Gently drop the roller (DO NOT PULL) and let the curl bounce back after the roller has been completely removed.
- Repeat with the remaining rollers. Let hair cool for one minute to set, and then style your hair into a look that lasts for hours.

THE IONIZING FUNCTION

Emits negative ions to:

neutralize the generally positive charge on flyaway, frizzy hair
eliminate static electricity
contribute to shine
NOTE: The unit may produce a clicking sound at times. This is normal for a high-output ion generator.
IMPORTANT: After using the hairsetter several times, you will find the best timing for the texture of your hair and the results you desire.

GETTING TO KNOW YOUR HAIR SETTER

8 two-inch-diameter jumbo rollers
8 easy-to-use plastic super clips

8-ROLLER HAIR SETTER

8 2-Inch Jumbo Rollers
8 Super Clips

JUMBO FLOCKED ROLLERS (2 inch)

Use medium-to-long hair to create a looser curl that’s bouncy and full of body.
Replacement rollers can be ordered online at www.conair.com by using the QR Code below or by calling customer service at 1-800-3-CONAIR.
Note: Roller colors may vary.
WARNING: IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination.
But did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on.
So when you are not using your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES

LIMITED WARRANTY

LIMITED THREE-YEAR WARRANTY (U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your unit free of charge for 36 months from the date of purchase if the appliance is defective in workmanship or materials.
To obtain service under this warranty, return the defective product to the service center listed on the back, together with your purchase receipt. California residents need only provide proof
of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 36 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 36-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Please register this product at register.conair.com