CONAIR B-17077 All-In-One Smoothing Dryer Brush Instructions
- October 27, 2023
- ConAir
Table of Contents
B-17077 All-In-One Smoothing Dryer
Brush
Instructions
ALL-IN-ONE SMOOTHING
DRYER BRUSH
model BC120 – all versions
INSTRUCTIONS AND STYLING GUIDE
For your safety and continued enjoyment of this product, always read the
instruction book carefully before using.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER DANGER – Any appliance is electrically live even when the switch is off. To reduce the risk of death or injury by electric shock:
- Always unplug appliance immediately after using.
- Do not use while bathing or in the shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquids.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
-
This appliance should never be left unattended when plugged in.
-
This appliance should not be used by, on, or near children or individuals with certain disabilities.
-
Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
-
Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a Conair Service Center for examination and repair.
-
Keep the cord away from heated surfaces.
Do not pull, twist, or wrap line cord around appliance, even during storage. -
Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
-
Never use while sleeping.
-
Never drop or insert any object into any opening or hose.
-
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
-
Do not use an extension cord to operate hot air styler.
-
Do not direct hot air toward eyes or other heat-sensitive areas.
-
Attachments may be hot during use. Allow them to cool before handling.
-
Do not place appliance on any surface while it is operating.
-
While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.
-
Do not use with a voltage converter.
-
This appliance is not a toy. Keep away from children.
SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS
This appliance is intended for household use only. Use on Alternating Current
(60 hertz) only.
Standard hot air stylers are designed to operate at 110 to 125 volts AC.
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
NOTE: Do not use this styling appliance on hair extensions.
CHECK ALCI SAFETY FEATURE EVERY TIME YOU USE APPLIANCE
This appliance is equipped with an Appliance
Leakage Circuit Interrupter (ALCI), a safety feature that renders it
inoperable under some abnormal conditions, such as immersion in water. To make
sure the ALCI is functioning properly, perform the following test. The
purpose of this test is to allow you to make sure the water sensing system
(ALCI) is working.
- Plug in the appliance and press test button on plug (see diagram).
- The appliance will stop working. There will be an audible click and reset button will pop out. This indicates the ALCI is functioning properly.
- To reset ALCI with a reset button, unplug unit. Then push reset button in and reinsert plug into outlet.
- If ALCI is not functioning properly, return appliance to service center.
- It is important that if immersion occurs, this unit be brought to a service center. Do not try to reset.
- Be sure to repeat test every time you use the unit to confirm ALCI is operational.
Should the appliance go off and the reset button pop up during use, this could indicate a malfunction in the unit. Remove plug from outlet and allow the appliance to cool. Reinsert plug into outlet.
The appliance should then function normally.
If not, return it to an authorized Conair Service Center for evaluation and repair.
IONIC TECHNOLOGY
Many aspects of modern living, including air-conditioning, contact with
man-made fibers and air pollution contribute to a buildup of static
electricity in the hair. Even brushing and toweldrying the hair can increase
these levels, causing the surface of the cuticle to become rough.
Consequently, hair may have a dull appearance. Also, high levels of static
charge cause hair to become flyaway and difficult to style.
The ion generator produces a stream of negative ions that act to neutralize
the static charge, smoothing the scales on the cuticle for shiny, smooth and
manageable hair, so you can achieve your desired style easily.
THE IONIZING FUNCTION
Generates negative ions to:
- neutralize the generally positive charge on flyaway, frizzy hair
- eliminate static electricity
- contribute to shine
NOTE: The unit may produce a clicking sound at times, which is normal for a high output ion generator.
GETTING STARTED
After shampooing your hair, towel-dry and use the dryer handle without the attachment to remove excess moisture from hair. Use a largetoothed comb to carefully untangle hair. Always start untangling your wet hair at the tips, then gradually work your way up to the scalp. Gentle untangling prevents split ends from forming. You may now finish drying and styling your hair using your hot air styler. Make sure your attachment is locked into place. Plug styler into outlet. Slide switch to turn appliance on and off.
FEATURES
- 1000W
- High-shine, ionic conditioning
- Cushioned paddle with heat-activated silicone for added shine
- 3 heat settings, plus cool shot
- Professional power cord
DRYER HANDLE
Use handle without attachment to remove excess moisture from hair before
styling.
PADDLE BRUSH
136 Flexalite™ bristles. Just the right number, spaced just the right way.
Epoxy tips gently massage scalp for painless detangling.
HEAT/SPEED SETTINGS
Cool Setting: This position combines ideal airflow and temperature setting for
shaping finer, damaged or treated hair.
Low Setting: Ideal airflow for medium, normal hair.
High Setting: Combines ideal airflow with higher temperature for thick hair.
Cool Shot: Using the cool shot setting at the end sets the style for a long-
lasting effect.
GET TO KNOW YOUR STYLER
TO STYLE HAIR
- After detangling hair, section damp hair into 4 to 8 equal parts, depending on hair type.
- Select heat setting based on hair type and desired effect.
- Place the paddle brush attachment into the hair, close to the roots, and brush through the section.
- For added root lift and volume: Place the brush underneath the hair section close to the roots with the bristles pointing upward. Use yo other hand to pull the hair section taut against the silicone paddle until the bristles penetrate through the hair.
- FOR MORE VOLUME: Turn your head upside down while you brush/dry.
| SETTING | HAIR TYPE |
|---|---|
| COOL | Fragile, Fine/Thin Hair |
| LOW | Medium/Normal Hair |
| HIGH | Wavy/Curly/Coarse Thick Hair |
| COOL SHOT | Sets Style |
bc120_20pa076261_infiniti_pro_knot_dr_ib_final.indd 1
IMPORTANT
Never immerse this product in water or any other liquids.
IF YOU MUST USE YOUR HOT AIR STYLER IN THE BATHROOM, INSTALL A GFCI* NOW!
Your local electrician can help you decide which type is best for you – a
portable unit that plugs into the electrical outlet or a permanent unit
installed by your electrician. The National Electrical Code now requires
GFCIs in the bathrooms, garages, and outdoor outlets of all new homes.
WHY DO YOU NEED A GFCI? Electricity and water don’t mix. If your hot air styler falls in water while it’s plugged in, the electric shock can kill you…even if the switch is off. A regular fuse or circuit breaker won’t protect you under these circumstances. A GFCI offers you far greater protection.
A GFCI can save your life! Compared to that, the price is small! Don’t wait…install one now!
- GFCI is a sensitive device that reacts immediately to a small electric current leak by stopping the electricity flow.
CLEANING & MAINTENANCE
• Unplug the appliance and let cool completely before cleaning it.
• Use a damp cloth to clean carefully. Make sure the appliance is completely
dry before using again.
• The rear filter should be cleaned on a regular basis using a soft brush to
help prevent buildup and overheating. This will also prolong the motor life.
USER MAINTENANCE
Your hot air styler is virtually maintenance free. No lubrication is needed. For proper operating performance, the hot air styler must be kept clean. When cleaning is needed, unplug the cord, allow to cool and clean dust and lint from air intake openings with a small brush or the brush attachment of a vacuum cleaner. The outer surface of the hot air styler should be wiped clean with a cloth only. Blocked or clogged air intake vents will cause the hot air styler to overheat. If overheating occurs, an automatic safety device will shut the hot air styler or the heat off to prevent damage or personal injury. If the unit or the heat turns off, unplug the cord and allow the hot air styler to cool for 10 to 15 minutes before restarting. Make sure the air vents are clean.
CAUTION
NEVER allow the power supply cord to be pulled, twisted, or severely bent.
Never wrap the cord tightly around the hot air styler. Damage will occur at
the high flex point of entry into the hot air styler, causing it to rupture
and short circuit. Inspect the cord frequently for damage. Stopuse immediately
if damage is visible or unit stops or operates intermittently. If the cord or
hot air styler is damaged or does not operate properly, return it for repair
to an authorized Conair service representative only. No repairs should be
attempted by the consumer.
STORAGE – IMPORTANT
When not in use, your hot air styler should be disconnected, allowed to cool
and stored in a safe, dry location, out of reach of children. Do not wrap line
cord around hot air styler. Allow the cord to hang or lie loose and straight
at the point of entry into the hot air styler.
LIMITED THREE-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free of charge for 36
months from the date of purchase if the appliance is defective in workmanship
or materials. To obtain service under this warranty, return the defective
product to the service center listed, together with your purchase receipt.
California residents need only provide proof of purchase and should call
1-800-3-CONAIR for shipping instructions. In the absence of a purchase
receipt, the warranty period shall be 36 years from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE 36-MONTH DURATION OF THIS
WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of special, incidental,
or consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state.
BEAUTY TIPS
To achieve the looks you love and for more great InfinitiPRO by Conair®
products, visit infiniti.conair.com
Please register this product at
www.conair.com/registration
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
For information on any Conair or InfinitiPRO by Conair
product, call 1-800-3-CONAIR or visit us on the web at
www.conair.com/infiniti ©2020 Conair
Corporation
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
20PA076261
IB-17077
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>