Raymarine RV-420 Stainless Steel Through Hull Transducer Set Instructions
- June 13, 2024
- Raymarine
Table of Contents
Raymarine RV-420 Stainless Steel Through Hull Transducer Set
Product Information
The product is a mounting template used for installing a device. It is important to ensure that the mounting template is printed true-to-scale before modifying the mounting surface. The template document provides measurements that should match the actual printed template. Adobe Acrobat is recommended for printing the mounting template with the correct settings. It is crucial to follow the instructions below to ensure that the templates are printed accurately.
Product Usage Instructions
To print the mounting template using Adobe Acrobat:
- Open the mounting template document in Adobe Acrobat Reader.
- Select File and then click on Properties.
- Note down the Page Size.
- Select File and then click on Print. The print dialog will be displayed.
- Select Properties.
- Ensure that the paper size is set to the same dimensions as the page size noted in Step 3.
- Click OK to return to the print settings dialog.
- Ensure that the Size Options and Page Scaling options are set to Actual Size or None.
- Make sure that the Auto-Rotate and Center or Auto portrait/landscape option (as appropriate) is NOT ticked.
- Select the relevant orientation (portrait or landscape) to match the template document orientation (most templates are landscape).
Note: The above instructions are provided in multiple languages for user convenience. Please refer to the appropriate language section for the instructions in your preferred language.
Caution: Ensure mounting template is printed true-to-scale
Before modifying mounting surface, ensure actual printed template matches the
measurements provided in the template document.
Configuring Adobe Acrobat to use
Raymarine recommended print settings
Adobe Acrobat must be configured correctly to ensure mounting templates print
true-to-scale.
With the mounting template document open in Acrobat Reader:
- Select File-›Properties.
- Make a note of the Page Size.
- Select File-›Print. The print dialog is displayed.
- Select Properties.
- Ensure the paper size is set to the same dimensions as the page size identified in Step 1.
- Click OK to return to the print settings dialog.
- Ensure “Size Options” and “Page Scaling” options (as appropriate) are set to “Actual Size” or “None”
- Ensure the “Auto-Rotate and Center” or “Auto portrait / landscape” option (as appropriate) is NOT ticked.
- Select the relevant orientation to match the template document orientation (“portrait” or “landscape”; most templates are landscape).
Transducer Mounting Template
Actual total length of transducer (including isolator plate): 319.38 mm (12.57 in)
NOTE: This document may NOT print true to scale. Before modifying mounting surface, ensure printed template matches the measurements provided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>