Miele TX0917 Built in Micro Oven Instruction Manual
- June 3, 2024
- Miele
Table of Contents
Miele TX0917 Built in Micro Oven
Building-in dimensions
Dimensions are given in mm.
Installation in a tall or base unit
When building the oven into a base unit underneath a cooktop, please also
observe the installation instructions for the cooktop as well as the building-
in height required for the cooktop.
Side view
Connections and ventilation
- Front view
- Mains connection cable, length = 2000 mm
- No connections permitted in this area
- Ventilation cut-out, min. 150 cm²
Installing the oven
- Connect the mains cable from the oven to the electricity supply.
- Push the oven into the housing unit and align it.
- Open the door and use the screws supplied to secure the oven to the side walls of the housing unit through the holes in the oven trim.
Electrical connection
The oven is equipped with a mains connection cable and plug for connection to
a 50 Hz, 230 V supply. The fuse rating must be at least 16 A. The appliance
must only be connected to a correctly installed earthed socket. All electrical
work must be carried out by a suitably qualified and competent person in
strict accordance with national and local safety regulations. Ensure that the
plug and switch are accessible at all times. If the appliance is hardwired or
if the switch is not accessible after installation, an additional means of
disconnection must be provided. Suitable means of disconnection include
accessible switches with an allpole contact gap of at least 3 mm. These
include circuit breakers, fuses and contactors. Voltage, rated load and fuse
rating are given on the data plate situated at the front of the oven
compartment. Please ensure the connection data matches the household supply.
When contacting Miele, please quote the following:
- Model number
- Serial number
- Connection data (voltage/frequency/ maximum rated load)
If the mains connection cable is damaged, a new one must be fitted by a service technician authorised by the Miele
This speed oven complies with European Standard EN 55011. This appliance is
classified as a Group 2, class B product. Group 2 appliances use high
frequency energy in the form of electromagnetic waves to create heat in food.
Class B is assigned to appliances that are suitable for domestic use.
Temporary or permanent operation with a self-sufficient or non-mains
synchronous energy supply system (e.g. isolated networks, back-up systems) is
possible. A requirement for the operation is that the energy supply system
complies with all current local and national requirements that apply to stand-
alone, solar and/or battery systems.
The protective measures provided in the domestic installation and in this
Miele product must also be assured in their function and operation in isolated
operation or in non-mains synchronous operation, or replaced with equivalent
measures in the installation. For example, as described in the current
publication of VDE-AR-E 2510-2.