DNF-M326W200 Refrigerator Ardesto Instruction Manual

DNF-M326W200 Refrigerator Ardesto

Specifications:

• Model Numbers: DNF-M326W200, DNF-M326X200, DNF-M326B200
• Dimensions: 990mm x 1025mm x [Depth]
• Capacity: [Capacity]

Product Usage Instructions

Installation:

1. Place the refrigerator in a well-ventilated area.
2. Ensure the refrigerator is leveled properly using adjustable feet.
3. Plug in the refrigerator to a suitable power source.

Operation:

1. Set the desired temperature using the temperature control settings.
2. Organize items inside the refrigerator for efficient storage.
3. Refer to the user manual for specific features and functions.

Cleaning and Maintenance:
Regularly clean the interior and exterior of the refrigerator with a mild detergent and water. Avoid using abrasive cleaners that may damage the surface.

FAQ:

1. Q: What should I do if the refrigerator is not cooling properly?
   A: Check if the temperature settings are correct and ensure proper ventilation around the refrigerator. If the issue persists, contact customer support.

2. Q: How often should I defrost the refrigerator?
   A: It is recommended to defrost the refrigerator when ice buildup is more than 0.5cm thick or as needed based on usage.

3. Q: Can I use additional shelves in the refrigerator?
   A: It is not recommended to add extra shelves as it may obstruct airflow and affect cooling efficiency.

EQUIPMENT

• Fridge – 1 pc.
• Instruction manual (warranty card included) – 1 pc.
• Microfiche – 1 pc.
• Energy label – 1 pc.
• Shelves of different types (quantity and type specify from the seller-firm)

SAFETY WARNINGS

1. WARNING! Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

2. WARNING! Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

3. WARNING! Do not damage the refrigerant circuit.

4. WARNING! Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

5. The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.

6. This appliance can be used by children aged from 8 years and above and persons with reduce physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

8. Please abandon the refrigerator according to local regulators for it use flammable blowing gas and refrigerant.

9. Please according to local regulations regarding disposal of the appliance for its flammable refrigerant and blowing gas. Before you scrap the appliance, please take
   off the doors to prevent children trapped.

10. This appliance is intended to be used in household and similar applications such as

    • staff kitchen areas in shops, offices and other work environments;
    • farm houses and by clients in hotels, motels and other residential type environments;
    • bed and breakfast type environments;
    • catering and similar non-retail applications.

11. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORISED SERVICE PERSONNEL TO CARRY OUT SERVICING OF REPAIRS WHICH INVOLVE THE REMOVAL OF COVERS.
TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS YOURSELF.

INSTALLATION

Location

When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly. This unit is not designed for use in a garage or outdoor installation. Do not drape the unit with any covering.
When installing the unit, ensure that 10 cm of free space is left at both sides, 10 cm at the rear and 30 cm at the top of the unit. This will allow cold air to circulate around the wine cooler and improve the efficiency of the cooling process.

Handles installation

1. Pull out the mounting plugs from the holes for attaching the handles.| 2) Insert the handles into the holes and tap them lightly to lock them in place. Tighten the fasteners.| 3) Insert the plugs of the fasteners into the corresponding holes.
   ---|---|---
   | | ****

Removing the handles and installing them on the other side of the door

1. Pull out the plugs of the fasteners from the holes.| 2) Unscrew the fasteners and remove the handles.| 3) Screw the mounting plugs back into the handle holes.| 4) Install the handles on the opposite side of the door in accordance with the instructions for installing the handles.
   ---|---|---|---
   | | |

Reversing the Door Swing

1. Please power off the appliance before conduct this operation. Remove all food from door shelves. Fix the door by masking tape.

2. Dismantle the upper cover, screws and upper hinge and remove the hole cover from the other side, unplug the wiring connectors (1 and 3 on the picture) of the refrigerator top.

3. Take off refrigerating chamber door as well as screws, screw cover, screw sticker, middle hinge and hole cap.

4. Take off freezing chamber door, dismantle bottom hinge and hole caps. Install shaft of bottom hinge on the other side and install the bottom hinge on the bottom beam.

5. a)Remove the upper cover of refrigerating chamber door, install the upper hinge sleeve, door signal line to the other side and install the door upper cover.
   Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber door and assemble the sleeve pipe and stopper on the left bottom of the door by screw. Install the upper hinge sleeve, the door signal line to the other side and install the door upper cover.
   5b) Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber door and assemble the sleeve pipe and stopper on the left bottom of the door by screw. Take off the sleeve pipe and hole caps of the freezing chamber door and mount it on the other side.

6. Put freezing door on bottom hinge and install middle hinge, hole caps, screw cover and screw sticker.

7. Take out the left top hinge. Put refrigerating door on the middle hinge, install the top hinge. Connect signal line terminal (points 1-4 on the picture below). Install top hinge cover and hole cover.

Door Space Requirements
The unit’s door must be able to open fully as shown. W×D≥990×1025mm

Levelling the Unit
To do this adjust the two levelling feet at the front of the unit.
If the unit is not level, the door and magnetic seal alignments will not be covered properly.
Make sure that the foot touches the ground before use.
Look down from the top, clockwise and counterclockwise loosening, tightening.

Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using a ‘Wrung-out’ sponge or cloth. Wash the shelves and salad bin in warm soapy water and dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth. If you require more information refer to the Cleaning section.

Before Using Your Unit

The refrigerator adopts 220~240V/50Hz AC power, voltage fluctuations over the range of 187 ~ 264V will cause malfunction or even damage.
Do not damage the power cord under any condition so as to ensure safety use, do not use when the power cord is damaged or the plug is worn.
Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent damages to the product or fire accidents.
Do not place flammable items near the refrigerator to avoid fires.
This product is household refrigerators and shall be only suitable for the storage of foods. According to national standards, household refrigerators shall not be used for other purposes, such as storage of blood, drugs or biological products.
Do not place items such as bottled or sealed container of fluid such as bottled beers and beverages in the freezer to prevent bursts and other losses.
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled. Do not damage the power cord under any condition so as to ensure safety use, do not use when the power cord is damaged or the plug is worn.
Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent damages to the product or fire accidents.
Do not place flammable items near the refrigerator to avoid fires.
This product is household refrigerators and shall be only suitable for the storage of foods. According to national standards, household refrigerators shall not be used for other purposes, such as storage of blood, drugs or biological products.
Do ot place items such as bottled or sealed container of fluid such as bottled beers and beverages in the freezer to prevent bursts and other losses.
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.

• Before Plugging in
  You must check that you have a socket which is compatible with the plug supplied with the unit.

• Before Turning On!
  Do not turn on until two hours after moving the unit.

Interior Accessories
Various glass or plastic storage shelves are included with your appliance – different models have different combinations.
You should always slide one of the full size glass storage shelves into the lowest set of guides, above the fruit and vegetable containers, and keep it in this position. To do this, pull the storage shelf forward until it can be swivelled upwards or downwards and removed.
Please do the same in reverse to insert the shelf at a different height.
In order to make the most of the volume of the fresh food storage compartment and frozen-food storage compartment, the user can remove one or more shelves, drawers, out of the appliance, according to your daily use.

PRODUCT OVERVIEW

(The picture above is only for reference. The actual configuration will depend on the physical product.)

Refrigerating chamber

• The Refrigerating chamber is suitable for storage of variety of fruits, vegetables, beverages and other food consumed in the short term, suggested storage time from 3 days to 5 days.
• Cooking foods shall not be put in the refrigerating chamber until cooled to a room temperature.
• Foods are recommended to be sealed up before putting into the refrigerator.
• The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy use.

Freezing chamber

• The low temperature Freezing chamber may keep food fresh for a long time and it is mainly used to store frozen foods and making ice.
• The freezing chamber is suitable for storage meat, fish, frozen foods and other foods not to be consumed in a short term.
• Chunks of meat are preferably to be divided into small pieces for quick freezing and easy access. Please be noted that food shall be consumed within
  the shelf time.

Chill drawer

• The Chill chamber is suitable for short term (1-3 days) storage products: fresh fish, fresh meat, etc.
• Food may be frozen near to the back and bottom of the drawer. The food that should not be frozen must not be placed into the drawer.
• Food classification and sealing pack is suggested.
  The position of drawers, food boxes, shelved, etc. according to the picture above is the most energy efficient.

OPERATION INSTRUCTIONS

(The picture above is only for reference. The actual configuration will depend on the physical product.)

• 1 Refrigerating icon
• 2 Temperature display icon
• 3 Super Cooling mode icon
• A. Temperature up button
• B. Temperature down button

Display
When power on the refrigerator for the first time, the whole display panel will shine for 3 seconds. Then the display panel enters the normal display. When doors are open display light on, when the door closes the display light goes out. At first time of using the refrigerator the default set temperature of refrigerating chamber is 5 °C.
When the error occurs, the display panel shows the error code. Otherwise, the display panel shows the set temperature.

Temperature settings
Press the temperature up button «A» to increase the temperature of the refrigerating chamber; each click of the temperature up button «A» will rise the temperature at 1 °C.
Press the temperature down button «V» to reduce the temperature of the refrigerating chamber; click of the temperature down button «V» will reduce the temperature at 1 °C.
The temperature setting range of refrigerating chamber is from 2 °C to 8 °C. When the temperature is adjusted to the boundary value, the refrigerator will sound an
alarm if the temperature up button «A» or the temperature up button «V» still have been pressed.

Set the Super Cooling mode
Set the Super cooling mode: after the temperature of the refrigeration room is adjusted to 2 °C, press the temperature down button «V» to enter the super cooling mode. In the super cooling mode, the temperature of the refrigerating chamber is automatically set to 2 °C.
Exit the Super cooling mode: press the temperature up button «A» to exit the super cooling mode or automatically exit the super cooling mode after 6 hours.
After exiting the super cooling mode, the temperature of the refrigerator will automatically return to the temperature set before the super cooling mode.

Opening door alarm
If the door is not closed in two minutes the buzzer will sound until the door is closed. Close the doors or press any one button to stop the buzzer alarm.

Temperature control of freezing chamber

The freezing temperature is relatively low in «COLDER» position, while the freezing temperature is relatively high in «COLD» position, thus, «NORMAL» position is generally used.
When ambient temperature is high in summer, the temperature shall be in the range from «NORMAL» to «COLD». If the ambient temperature is above 35 °C, then
«COLD» position shall prevail.
When ambient temperature is low in winter, the temperature shall be in the range from «NORMAL» to «COLDER». If the ambient temperature is below 10 °C, then
«COLDER» position shall prevail.
Note: setting the mode to a lower temperature will activate the fast freeze mode, which will automatically turn off after 24 hours.

Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator. If the refrigerator does not work properly with the indication
a code of the following malfunctions, contact an authorized service center to ensure optimal operation of the appliance.

CLEANING

Defrosting
Auto-defrost for Frost-free Refrigerator

Cleaning the Interior and the Exterior of the Unit

• Remove all the shelves and the salad bin. To remove the salad bin first remove the lower door shelf.
• Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm water using a“wrung-out” sponge or cloth. Wipe completely dry before replacing the shelves and salad bin.
• Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make sure that the door is closed to avoid the polish getting on the magnetic door seal or inside the unit.
• The grille of the condenser at the back of the unit and the adjacent components can be vacuumed using a soft brush attachment.

Cleaning Tips
Condensation may appear on the outside of the unit. This may be due to a change in room temperature. Wipe of any moisture residue. If the problem continues, please contact a qualified technician for assistance.

MAINTENANCE

Changing the Internal Light
Lamp replacement by professionals.

Care When Handling / Moving Your Unit
Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted by holding the edges of the top surface.

Servicing
The unit should be serviced by an authorized engineer and only genuine spare parts should be used. Under no circumstances should you attempt to repair the unit yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunction. Contact a qualitatively technician.

Switching Off for Long Periods of Time
When the unit is not in use for a long period of time, disconnect it from the mains supply, empty all food and clean the appliance, leaving the door ajar to prevent unpleasant smells.
Do not shield positions of air outlet and return air inlet of the refrigerator
Do not keep foods of higher temperature close to temperature sensor
Take out drawer of freezing chamber of refrigerator and put foods directly on the glass partition

Troubleshooting

The following simple issues can be handled by the user. Please call the after- sale service department if the issues are not settled.

Inoperation| Whether the freezer is plugged and connected to power; Low voltage; Failure power or tripping circuit
---|---
Odor| Odorous foods should closely wrapped; Whether foods are rotten; Whether the interior shall be cleaned.
Long-term operation of compressor| It is normal that refrigerator operates for longer time in summer when the ambient temperature is higher; Do not put too much food in the freezer at one time; Do not put foods until they are cooled; Frequent opening of refrigerator door.
Illuminating light does not shine| Whether the refrigerator is connected to power, whether the illuminating light is damaged.

The refrigerator door can not be properly closed.

| The freezer door is stuck by food packages; Too much food; Tilt refrigerator.
Loud noises| Whether the food is leveled, whether the refrigerator is balanced; Whether the refrigerator parts are properly placed.

Warm tips:

• The refrigerator enclosure may emit heat during operation specially in summer, this is caused by the radiation of the condenser, and it is a normal phenomenon.
• Condensation: condensation phenomenon will be detected on the exterior surface and door seals of the freezer when the ambient humidity is large, this is a normal phenomenon, and the condensation can be wiped away with a dry towel.
• Buzz: Buzz will be generated by running compressor specially when starting up or shutting down.

TIPS FOR ENERGY SAVING

Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
In normal temperature conditions, please arrange the thermostat at the middle setting.
Before loading the appliance with packages of fresh food, make sure they are cooled to ambient temperature.
Ice and frost layer increase energy consumption, so clean the appliance as soon as the layer is 3-5 mm thick.
If it is the outer condenser, the rear wall should be always clean free of dust or any impurities.

• The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.

DISPOSAL

Old units still have some residual value. An environmentally friendly method of disposal will ensure that valuable raw materials can be recovered and used again. The refrigerant used in your unit and insulation materials require special disposal procedures. Ensure that none of the pipes on the back of the unit are damaged prior to disposal. Up to date information concerning options of disposing of your old unit and packaging from the new one can be obtained from your local council office.
When disposing of an old unit break of any old locks or latches and remove the door as a safeguard.

Correct Disposal of this product

| Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

For more information, please contact the local authority or your retailer where you purchased the product.

For notes

WARRANTY CONDITIONS

The plant guarantees normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual.
Service life of the product is 5 years.
In order to avoid any misunderstanding we kindly ask you to carefully study the Owner’s Manual, the terms of warranty, and check the correctness of filling the Warranty Card. The Warranty Card is valid only if the following information is correctly and clearly stated: model, serial number of the product, date of sale, clear seals of the company-seller, signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card. If these terms are violated, and if the information specified in the Warranty Card is changed, erased or rewritten, the Warranty Card is considered invalid. Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user, and by specialists having the necessary qualification sent by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for
the correctness and quality of installation (setup). Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation, and for obtaining warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card.
In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase. Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made in accordance with the law «On Protection of Consumers’ Rights». In the case of warranty repair the warranty period shall be extended for the period of repair and shipment.

WARRANTY CARD

Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this product.
Keep this card during the warranty period. When purchasing a product ask for the warranty card to be completely filled out.

1. Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
2. The service life of household appliances is 5 years.
3. The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
4. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
5. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
6. The product is removed from warranty service in the following cases:
   • misuse and non-consumer use;
   • mechanical damage;
   • damage caused by the ingress of foreign objects, substances, liquids, insects;
   • damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
   • damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
   • when operating equipment in the power supply network with a missing single ground loop;
   • in case of violation of seals installed on the product;
   • lack of serial number of the device, or inability to identify it.
7. The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
8. The warranty period is 12 months from the date of sale.

• Tear-off maintenance tickets are provided by an authorized service center.
  The completeness of the product is checked. I have read the terms of the warranty service, no complaints.
  Customer signature

  ---

Warranty card

References

• Компания ERC: Сервис-центр(СЕРВІСНИЙ ЦЕНТР)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>