ARDESTO FNT-C880 Floor Standing Fan Instruction Manual
- October 30, 2023
- ARDESTO
Table of Contents
FNT-C880 Floor Standing Fan
Instruction Manual FNT-C880
220-240В~ 50-60Гц 50Вт/220-240V~ 50-60Hz 50W
It is important that you read these instructions before using your product and we strongly recommend that you keep them in a safe place for future reference.
CAUTION
- Use as per the rating voltage.
- Do not repair or remake the appliance by yourself, it should be repaired by the repairmen.
- Do not operate the appliance with wet hands, in order to avoid damage.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- When the appliance is not in use, switch it off and unplug it.
- Do not insert things to air outlets and inlets, in order to avoid damage.
- Do not use the appliance near explosive and combustible gas.
- Use the appliance only on a flat surface.
- Do not use outdoors.
- Do no turnover the appliance. Unplug the power supply If it is toppled over and there have some water in the body. Dry the body before use.
- Clean the appearance with a lightly damp cloth. It can clean with neutral detergents. Do not rinse with water.
- Do not make air outlets and inlets near the wall or curtain.
- Do not knock or shake the body when use, otherwise it may cause stop.
- The appliance must not located immediately below a socket outlet. The rating current of socket should exceed 10A.
- Do not use the appliance in the immediate surrounding of a bath, a shower a swimming pool.
- This appliance can be used by children over the age of 8 and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they are under constant supervision or instructed in the safe use of the appliance and understand the possible dangers. Children should not play with the appliance. Cleaning and customer service should not be performed by children without supervision.
- Children should be supervised to ensure that they do not play with the appliance.
EQUIPMENT
- Fan – 1 pc
- Pipe – 1 pc
- Base with fixing nut – 1 pc
- Remote control – 1 pc
- User manual (warranty card is included) – 1 pc
PRODUCT STRUCTURE
FUNCTIONS & OPERATION
Plug in first
Put the plug into the socket, products in standby, power indicating light is
on.
ON/OFF button: Push “ON/OFF” button to working state, push it again to
standby.
SPEED button: Push “SPEED” button to set from HIGH-MIDDLE-LOW fan speed.
WIND button (on the remote control only): Push “WIND” button to set from
«Normal wind» – «Natural wind» – «Sleeping wind».
OSCILLATION button: Push “OSC” button to oscillate the fan, push it again
to stop the function.
Can manually adjust the range of 90 degrees vertically and 70 degrees
horizontally
TIMER button: Push “TIMER” button from 00-15 hours.
After 60 seconds automatically turn off the screen.
The remote control use one button cells, model No. CR2025 (3V). We recommend the use of Lithium type battery for longer use.
Note: Please follow battery disposal instruction on batter packaging, or contact your local councils for safely disposal of batteries
ASSEMBLING
After unpacking, check whether the body is in good condition and whether there
is any defect.
First remove the screw at the bottom of the connecting pipe, insert the
connecting pipe into the chassis and fix it together with the screw. Loosen
the fixed screw at the back of the control box, put the machine head on the
connecting pipe, and tighten the fixing screw to fix the machine head and the
connecting pipe together.
CLEANING AND MAINTENANCE
Clean with neutral detergent and soft cloth.
Attention: unplug the power plug when clean the appliance, since there
have high pressure in the body. Do not leave any water on the control panel
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
To protect our environment and to recycle the raw materials used as completely
as possible, the consumer is asked to return unserviceable equipment to the
public collection system for electrical and electronic. The symbol of the
crossed indicates that this product must be returned to the collection point
for electronic waste to feed it by recycling the best possible raw material
recycling.
By ensuring this product you will prevent possible negative effects on the
environment and human health, which could otherwise be caused due to improper
disposal of that product. The recycling of materials from this product, you
will help to preserve a healthy environment and natural resources.
ADDITIONAL INFORMATION FOR MODEL: FNT-C880
| Description | Symbol | Value | Unit |
|---|---|---|---|
| Maximum fan flow rate | F | 10,19 | m3/min |
| Fan power input | P | 29,9 | W |
| Service value | SV | 0,34 | (m3/min)/W |
| Standby power consumption | PSB | 0,2 | W |
| Fan sound power level | LWA | 51,3 | dB(A) |
| Maximum air velocity | c | 5,5 | meters/sec |
| Measurement standard for service value | IEC 60879:2019 – Comfort fans and |
regulators for household and similar purposes – Methods for measuring
performance
Contact details for obtaining more information| FC «LOGIN», Marka Vovchka st.,
bldg. 18-A,
Kyiv city, 04073, Ukraine.
Brand official website:
ardesto.com.ua
Warranty conditions:
The plant guarantees normal operation of the product within 12 months from the
date of the sale, provided that the consumer complies with the rules of
operation and care provided by this Manual.
Service life of the product is 5 years. In order to avoid any misunderstanding
we kindly ask you to carefully study the Owner’s Manual, the terms of
warranty, and check the correctness of filling the Warranty Card. The Warranty
Card is valid only if the following information is correctly and clearly
stated: model, serial number of the product, date of sale, clear seals of the
company-seller, signature of the buyer. The model and serial number of the
product must correspond to those specified in the Warranty Card.
If these terms are violated, and if the information specified in the Warranty
Card is changed, erased or rewritten, the Warranty Card is considered invalid.
Setup and installation (assembly, connection, etc.) of the appliance are
described in the attached documentation; they can be carried out both by the
user, and by specialists having the necessary qualification sent by USC or
selling companies (on a paid basis). In this case, the person (the
institution) installing the appliance shall be responsible for the correctness
and quality of installation (setup). Please pay attention to the importance of
the correct installation of the appliance, both for its reliable operation,
and for obtaining warranty and free service. Require the installation
specialist to enter all the necessary information about the installation in
the Warranty Card.
In case of failure of the appliance during the warranty period by the fault of
the manufacturer, the owner is entitled to free warranty repair upon
presentation of the correctly filled Warranty Card together with the appliance
in the factory configuration packed in the original packaging to the warranty
workshop or the place of its purchase. Satisfaction of the customer’s claim
due to the fault of the manufacturer shall be made in accordance with the law
«On Protection of Consumers’ Rights». In the case of warranty repair the
warranty period shall be extended for the period of repair and shipment.
WARRANTY CARD
Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance,
which was designed and manufactured in accordance with the highest quality
standards, and we thank you for choosing this particular instrument.
We ask you to keep the coupon during the warranty period. When purchasing a
product, require a full warranty card.
-
Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
-
The service life of household appliances is 5 years.
-
The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
-
Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
-
The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
-
The product is removed from warranty service in the following cases:
• misuse and non-consumer use;
• mechanical damage;
• damage caused by the ingress of foreign objects, substances, liquids, insects;
• damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
• damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
• when operating equipment in the power supply network with a missing single ground loop;
• in case of violation of seals installed on the product;
• lack of serial number of the device, or inability to identify it. -
The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
-
The warranty period is 12 months from the date of sale.
- Tear-off maintenance tickets are provided by an authorized service center.
The completeness of the product is checked. I have read the terms of the warranty service, no complaints.
Customer Signature ____
Elit service:
3 petre Kavtaradze str Tbilisi
94 gorgiladze street Batumi
71 davit guramishvili street Gori
73 kostava str Akhaltsikhe
Warranty card
Product information|
---|---
Product|
Model|
Serial number|
Seller Information|
Trade organization name|
The address|
Date of sale|
Seller stamp|
Coupon 3
Seller stamp:
Date of application ——————————-
Cause of damage ——————————-
Date of completion ——————————-
Coupon 2
Seller stamp:
Date of application ——————————-
Cause of damage ——————————-
Date of completion ——————————-
Coupon 1
Seller stamp:
Date of application ——————————-
Cause of damage ——————————-
Date of completion ——————————-