ARDESTO HD-R300PT Hair Dryer Instruction Manual

: May 15, 2024
: ARDESTO

Table of Contents

SAFETY MEASURES
EQUIPMENT
DEVICE DESCRIPTION & USE
CLEANING AND MAINTENANCE
STORAGE
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ARDESTO HD-R300PT Hair Dryer

ATTENTION! Before using the product, carefully read this «Instruction manual».

SAFETY MEASURES

When using an electrical appliance, to reduce the risk of damage to the appliance, fire, electric shock, or personal injury, basic safety precautions should be followed, including the following:

Use the device only for its intended purpose in accordance with the instructions contained in this manual.
The appliance is intended for domestic use only.
Do not use outdoors.
Before using the product for the first time, check whether the technical specifications indicated on the product correspond to the power supply.
If the product has been at a temperature below 0 ºC for some time, it should be kept at room conditions for at least 2 hours before turning it on.
Use the device in a well-ventilated area.
Keep the appliance and its power cord away from sources of heat and from heat sensitive surfaces.
Do not use the appliance with wet hands, in a damp environment or on wet surfaces.
Do not cover the hair dryer to avoid overheating. Do not block air inlets or outlets.
Do not insert or allow objects to fall into any ventilation openings.
Do not leave the hair dryer on unattended.
Always turn off the appliance (using the switch) and unplug it from the socket after use.
lways unplug the appliance before cleaning and when not in use.
For additional protection, it is advisable to install a residual current device (RCD) with a rated operating current not exceeding 30 mA in the bathroom power circuit; during installation, you should seek the advice of a specialist.
When using the device in the bathroom, it must be unplugged after use, as the proximity of water is dangerous even when the device is turned off.
WARNING! Do not use this appliance near water contained in basins, bathtubs or other vessels.
To prevent electric shock and fire, do not immerse the device in water or other liquids.
If this happens, unplug it immediately and contact an authorized service center for inspection.
The appliance gets warm during use. To avoid burns and damage, do not touch the hot surfaces of the hair dryer. Use the handle to move.
If the overheat protection system has tripped, do not turn on the appliance until it has completely cooled down.
Do not cover the cable with carpet or other objects. Position the cable so that it does not cross the passage and does not interfere with movement.
Keep the power cord away from sharp edges and hot surfaces. Do not pull, twist, or wrap the power cord around anything.
Do not carry the hair dryer by the cable or hanging loop. Do not pull on the cable, when disconnecting the device from the mains, hold on to the plug.
Do not use the appliance with a damaged cable or plug, or a damaged or defective appliance.
Do not attempt to repair or replace parts of the device. Repairs must only be carried out by qualified service personnel.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
Do not use accessories other than those supplied.
Do not use an extension cord as it may cause overheating or fire.
This appliance can be used by children form 8 years and above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Keep the appliance and its cord out of reach of children.

The manufacturer reserves the right, without notice, to make changes to the design and equipment that do not impair the efficiency of the device.

EQUIPMENT

Hair dryer – 1 pc
Concentrator – 1 pc
Diffuser – 1 pc
Instruction manual (warranty card is included) – 1 pc

DEVICE DESCRIPTION & USE

Device Description & Use

А – concentrator attachment
B – housing
С – air flow speed switch
D – air flow temperature switch button
E – filter cover
F – hanging loop
G – diffuser attachment

Make sure that your hands are completely dry before plugging in.
Plug in and set speed switch to the required position (1/2).
Select required temperature of air flow by temperature switch button: cold air flow and two levels of air flow heating.
After the end of use, set the speed switch to off position (0) and unplug the dryer.

Note: when you press the switch to change the temperature mode, the color of the LED backlight of the hair dryer changes to the one corresponding to the selected mode.

*IONIC TECHNOLOGY (optional)** Hair dryers designed with ionization technology have the function of creating negative ions, which makes the drying process faster and gentler for your hair. Negatively charged ions neutralize static caused by positive ions and tame unruly hair. Negative ions also help lock in moisture and straighten the cuticle, making hair smooth and shiny.

CLEANING AND MAINTENANCE

Before cleaning the device, turn off the device and remove the plug from the socket. • Allow the device to cool completely before cleaning.
Do not use abrasive detergents, organic solvents or harsh chemicals.
Do not immerse the device in water or other liquids.
Constantly clean the dust and hair with a brush.
Clean the device body with a slightly damp cloth, then wipe it with a dry cloth.
Periodically clean the filter:
To remove the filter, hold the hair dryer by the handle and turn the cover (filter holder) counterclockwise.
Remove the internal filter. Clean it with a cloth or damp sponge.
Make sure that it is completely dry before install back

STORAGE

Before storing, make sure the appliance is unplugged and completely cooled down.
Follow all CLEANING AND MAINTENANCE requirements.
Store the device in a cool, dry place.

DEVICE PRODUCTION DATE

The production date is indicated on the package (in the serial number) after «S/N», in the format: MMYYYYXXXXXXXXX, where MM is the month of production, YYYY is the year of production.
Do not discard the packaging before the warranty period has expired.

ENVIRONMENTAL PROTECTION / CORRECT DISPOSAL OF THE DEVICE

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Warranty

Warranty conditions:

The plant guarantees normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual. Service life of the product is 5 years.
In order to avoid any misunderstanding we kindly ask you to carefully study the Owner’s Manual, the terms of warranty, and check the correctness of filling the Warranty Card. The Warranty Card is valid only if the following information is correctly and clearly stated: model, serial number of the product, date of sale, clear seals of the company-seller, signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card.
If these terms are violated, and if the information specified in the Warranty Card is changed, erased or rewritten, the Warranty Card is considered invalid.
Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user, and by specialists having the necessary qualification sent by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality of installation (setup).
Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation, and for obtaining warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card.
In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase.
Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made in accordance with the law «On Protection of Consumers’ Rights».
In the case of warranty repair the warranty period shall be extended for the period of repair and shipment.

WARRANTY CARD

Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular instrument.

We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
The service life of household appliances is 5 years.
The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after sales service is performed on a paid basis.
Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
The product is removed from warranty service in the following cases:
- misuse and non-consumer use;
- mechanical damage;
- damage caused by the ingress of foreign objects, substances, liquids, insects;
- damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
- damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
- when operating equipment in the power supply network with a missing single ground loop;
- in case of violation of seals installed on the product;
- lack of serial number of the device, or inability to identify it.
The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
The warranty period is 12 months from the date of sale.