ARDESTO SI-S1200W Handheld Garment Steamer Instruction Manual

May 15, 2024
ARDESTO

ARDESTO SI-S1200W Handheld Garment Steamer Instruction Manual

SAFETY MEASURES

  • Before using this product, please read the instruction carefully and keep it for future reference.
  • Use this appliance only for the purpose described in the instructions.
  • Do not immerse this product in water or other liquids and do not rinse under a faucet.
  • WARNING! Be careful when using the device to avoid burns from touching hot parts, hot water, hot splashes or steam. Be careful when pouring water from the appliance – there may be hot water in the tank. Before connecting the product to the power supply, please check whether the marked voltage is consistent with the local power supply voltage.
  • Do not use the product if the plug, power cord or the product itself has become visibly damaged, or if the product has fallen or leaked.
  • The product can only be sent to the authorized service center for maintenance. Do not repair the product by yourself, or the warranty will be invalid.
  • If the power cord is damaged, it must be replaced by the manufacturer, service center or similarly qualified personnel in order to avoid a hazard.
  • Do not leave the device on unattended.
  • This appliance can be used by children over the age of 8 and people with disabilities or lack of experience or knowledge, if they are under constant supervision or have been instructed in the safe use of the appliance and they understand the possible dangers. Cleaning and customer service should not be performed by children without supervision.
  • Children shall not play with the appliance.
  • Keep the product and its power cord out of reach of children under 8 years of age.
  • To reduce the risk of contact with hot water coming out of the steam vents, check the appliance before each use. Turn on the device, holding it away from the body.
  • Do not touch the steam head and surface when using. This product produces high-temperature steam during use, please do not aim at people or animals, and do not iron clothes on the body to avoid the risk  of burns.
  • Be sure to remove the power plug before cleaning the product, installing or removing brush accessories, or filling the water tank.
  • The product can only be used with grounded socket.
  • Do not allow the power cable to come into contact with sharp edges or hot surfaces.
  • If the product is very hot/has been connected to the power supply, do not allow the steam nozzle to come into contact with any surface when placing the device. The product must be placed on a stable heat resistant surface.
  • Check regularly whether the power cord is damaged.
  • Do not allow the power cord to come into contact with high temperature steam during product operation.
  • Do not use this product when the water tank is empty.
  • When you leave the product for a short time, please turn off the product power and unplug the power plug.
  • After ironing, be sure to turn off the power and remove the power plug, and let it cool for 60 minutes before cleaning the product.
  • This product is for household use only. Please do not use this product in the bathroom or outdoors.
  • Do not drag the product or power cord.
  • To disconnect the appliance from the mains, always hold the plug.
  • Be careful when steaming clothes: steam can damage or discolor walls or doors.
  • A small amount of smoke may be emitted during the first use, which is normal and should not occur again.
  • When adding water to the water tank, the water level shall not exceed the maximum water level.
  • According to the design, your product is suitable for using pure and clean water. If the water in your area is very hard, scale may build up. The use of poor-quality water can lead to loss of performance.
  • Do not put perfume, vinegar, detergent, ironing agent or other chemicals into the water tank, as these chemicals are not suitable for use in this product.
  • Do not use additional accessories that are not included in the delivery set; it may cause fire, electric shock or personal injury.

EQUIPMENT

Steamer: – 1 pc
Nozzle: – 1 pc
Instruction manual (contains warranty card): – 1 pc
Water filling cup: – 1 pc

DEVICE DESCRIPTION

Device Description

  1. Power cable fastening
  2. Handle
  3. Steam button
  4. Water tank
  5. Light indicator
  6. Head cover
  7. Fabric brush
  8. Heating panel

BEFORE THE FIRST USE

  • Remove any labels or protective covers from the steam head and straighten the power cord before use.
  • The first time you use the steamer, leave the steam aside for a few minutes. This will remove any impurities and odors that may be left during the manufacturing process.
  • In order to avoid circuit overload, it is recommended not to use the same socket circuit with other appliances.

DEVICE USE

  1. Take out the product, remove all the packaging materials on the product.
  2. Before filling the tank, turn off the device and unplug it from the mains. Pour clean water into the water tank. Make sure the water tank is at least one third full. Do not exceed the maximum mark. Fill only with clean or distilled water.
  3. Hold the handle of the steamer with one hand and attach the nozzle if needed.
  4. Insert the plug into the outlet. When connected to the power supply, heating begins immediately, which is indicated by an indicator light. When the heating is completed – the light goes out – the steamer is ready for use.
  5. Press the steam button, the device will start emitting steam. Press this button again to stop steaming.

STEAMING

This hand steamer is very easy to use, suitable for ironing almost any type of fabric.

Note: this handheld steamer is designed for vertical and horizontal steaming.

  1. Make sure the fabric is breathable to avoid steam building up on the fabric and getting it wet.
  2. Before ironing, make sure that the pockets of the clothes are empty.
  3. Check the back of clothing and items behind clothing that are easily damaged by steam.
  4. Do not direct hot steam from the steamer onto metal parts of the garment, as this may cause them to become deformed and/ or discolored. Use the device carefully if there are many metal accessories on the clothes.
  5. When you press the steam button, you will feel the vibration and hear a subtle buzzing sound, which is normal.
  6. Gently move the steamer to iron out creases.
  7. If you are not using either attachment, keep the steamer at least 5cm away from the fabric.
  8. If the buzzing gets louder and no steam comes out, check the water tank and refill it

AFTER EACH USE

  1. After using the device, be sure to turn it off by unplugging it from the mains.
  2. Remove the water tank and drain the remaining water in the water tank.

DEVICE CLEANING, CARE AND STORING

  • Before cleaning, always switch off the device and disconnect it from the mains and wait for the device to cool down.
  • Remove the attachment on the steam head, and then use a wet cloth to clean the device.
  • Do not use harsh or corrosive cleaners or solvents.
  • Do not immerse the device in water or any other liquid.
  • Don’t throw it or try to bend it.
  • Please do not attempt to disassemble the appliance.
  • Empty the water tank after each use.
  • Outlet nozzles of the heater can be clogged with scale. In this case, clean the nozzles with any non-abrasive household anti-scaling agent. Monitor the quality of the water you pour into the water tank.
  • Do not store the device in a humid environment.
  • Do not place the device near heat sources and avoid direct sunlight.
  • Always make sure that the steam outlets are clean, free from dirt and not blocked.

The manufacturer reserves the right to make changes in the technical characteristics and design of the products that do not impair the operational qualities.

TROUBLESHOOTING GUIDE

Malfunction Solutions
There is no steam from the device
  • check whether the water tank is installed correctly.
  • check the water level in the water tank

The water tank leaks|

  • ensure that the water level does not exceed the maximum level.
  • check whether the water tank is installed correctly.

Loud pump sound|

  • check whether the water tank is installed correctly.
  • check the water level of the water tank.
  • Air has accumulated in the water tube when the device has not been used for a long time. The sound should become quieter.

If the above actions did not help in solving the problem, please contact an authorized service center for help. Do not attempt to repair the device yourself.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return you rused device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling

Warranty conditions:

The plant guarantees normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual.

Service life of the product is 5 years.

In order to avoid any misunderstanding we kindly  ask you to carefully study the Owner’s Manual, the terms of warranty, and check the correctness of filling the Warranty Card. The Warranty Card is valid only if the following information is correctly and clearly stated: model, serial number of the product, date of sale, clear seals of the companyseller, signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card.

If these terms are violated, and if the information specified in the Warranty Card is changed, erased or rewritten, the Warranty Card is considered invalid.

Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user, and by specialists having the necessary qualification sent by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality ofinstallation (setup). Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation, and for obtaining warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card.

In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase. Satisfaction of the customer’s claim dueto the fault of the manufacturer shall be made in accordance with the law «On Protection of Consumers’ Rights». In the case of warranty repair the warranty period shall be extended for the period of repair and shipment.

WARRANTY CARD

Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular instrument.

We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

  1. Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
  2. The service life of household appliances is 5 years.
  3. The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
  4. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
  5. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
  6. The product is removed from warranty service in the following cases:
    • misuse and non-consumer use;
    • mechanical damage;
    • damage caused by the ingress of foreign objects, substances, liquids, insects;
    • damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
    • damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
    • when operating equipment in the power supply network with a missing single ground loop;
    • in case of violation of seals installed on the product;
    • lack of serial number of the device, or inability to identify it.
  7. The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
  8. The warranty period is 12 months from the date of sale.
  9. Tear-off maintenance tickets are provided by an authorized service center.

The completeness of the product is checked. I have read the terms of the warranty service, no complaints.

Customer Signature:

Warranty card

  • Product information
  • Product
  • Model
  • Serial number
  • Seller Information
  • Trade organization name
  • Date of saleжу
  • Seller stamp

Coupon

Seller stamp

  • Date of application
  • Cause of damage
  • Date of completion

Coupon

Seller stamp

  • Date of application
  • Cause of damage
  • Date of completion

Coupon

Seller stamp

  • Date of application
  • Cause of damage
  • Date of completion

Company Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ARDESTO User Manuals

Related Manuals