Yealink UVC84 Camera For Video Conferences Installation Guide
- July 8, 2024
- Yealink
Table of Contents
Yealink UVC84 Camera For Video Conferences
Specifications
- Power Supply: DC48V
- Mounting Options: Table, Display, Wall, Ceiling, TV Mount
- Hardware Interface: DC48V, VCH, Video Out, USB, Line Out, Security
- LED Indicator: Off, Solid green, Solid red, Flash red, Flash yellow
Product Usage Instructions
Installation:
To install the UVC84, follow these steps:
- Place the UVC84 on a flat surface such as a conference table with an angle of inclination not exceeding 5 degrees.
- If mounting on top of a display, choose the installation method based on the thickness of the TV.
- For wall mounting, position the UVC84 at a recommended height of 1.55m-1.85m above the ground.
- For ceiling mounting or mounting onto a TV mount, follow the respective installation instructions.
Hardware Interface:
Connect the UVC84 to various devices using the hardware interfaces:
- DC48V: Connect to a power adapter.
- VCH: In MVC system, connect to an audio device like VCM34.
- Video Out: Connect to a PC for video output.
- USB: Insert DD10 to connect to CPW90.
- Line Out: Connect to an audio output device using a 3.5mm audio cable.
- Security: Connect a universal security cable to lock the UVC84 in place.
LED Indicator:
The LED indicator provides information about the status of the UVC84:
- Off: UVC84 is powered off.
- Solid green: UVC84 is active.
- Solid red: UVC84 is in sleep mode.
- Flash red: UVC84 is in recovery mode.
- Flash yellow: UVC84 is upgrading firmware.
Frequently Asked Questions
Q: Can I use third-party accessories with the UVC84?
A: It is recommended to use accessories provided or approved by Yealink to ensure optimal performance. The use of unapproved third-party accessories may result in poor performance.
Package Contents
TIP
For the UVC84 unboxing video, and please refer to UVC84.
We recommend that you use the accessories provided or approved by Yealink. The
use of unapproved third-party accessories may result in poor performance.
Install UVC84
-
Put on a Flat Surface
You can put the UVC84 on the conference table, and make sure that the angle of inclination of the UVC84 is not more than 5 degrees to ensure proper operation. -
Mount on top of a display
Choose the following installation method when the thickness of the TV is between 0mm and 70mm.
Choose the following installation method when the thickness of the TV is between 46 mm and 146 mm.
Mount on the Wall
The recommended height is 1.55 m-1.85 m above the ground.
Mount on the Ceiling
Mount onto a TV Mount
Hardware Interface
| No. | Item | Description |
|---|---|---|
| 1 | DC48V | Connect to a power adapter. |
| 2 | VCH | In MVC system, connect to audio device (for example: VCM34). |
| 3 | Video Out | Connect to a PC as video output. |
| --- | --- | --- |
| 4 | USB | Insert DD10 to connect to CPW90. |
| 5 | Line Out | Connect to an audio output device using an audio cable (3.5mm). |
6
| Security slot| Connect a universal security cable to the UVC84 so that you can lock the UVC84 down.
Connect UVC84
Connect to PC
Connect to the video conference system
NOTE
Not included accessories requirements:
- Display: Resolution of 1080p or higher and with an HDMI port.
- Ethernet cable: CAT5e or higher ethernet cable.
- PoE switch: If you use PoE to connect cameras, you need to use PoE+.
- PC: Equipped with HDMI or USB-C (support DP protocol) Port.
LED Indicator
| LED Status | Description |
|---|---|
| Off | The UVC84 is powered off. |
| Solid green | The UVC84 is active. |
| Solid red | The UVC84 is in sleep mode. |
| Flash red | The UVC84 is in recovery mode. |
| Flash yellow | The UVC84 is upgrading firware. |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>