VIMAR Linea, Eikon, Arke, Idea, Plana Gateway Wireless Bluetooth Wireless Technology Instructions
- July 11, 2024
- VIMAR
Table of Contents
VIMAR Linea, Eikon, Arke, Idea, Plana Gateway Wireless Bluetooth Wireless
Technology Instructions
Gateway View Wireless Bluetooth® wireless technology 4.2 Wi-Fi, LED RGB, power supply 100-240 V 50/60 Hz – 2 modules.
Read the instructions before installation and/or use.
The gateway is a Bluetooth technology Wi-Fi device designed to allow dialogue with wireless devices to permit the configuration, supervision, system diagnostics and its integration with voice assistants. It is the main device that manages the Bluetooth technology Mesh network and via the View Wireless App it receives the system configuration via Bluetooth technology. The presence of wi-fi connectivity is required to allow the connection to the cloud for supervision (local and remote) and for integrations with the Alexa, Google Assistant and Siri voice assistants.
The gateway has a front push button for configuration/reset and an RGB LED for indicating the device state.
It is also compatible with Apple Homekit; for association, use the Home App and scan the gateway QR Code. From FW version r452 you need to press the front push button on the gateway briefly to activate/reactivate the association phase manually (this takes approximately 10 min); when the push button is pressed the LED lights up yellow for 2 s to confirm activation.
FEATURES.
- Rated supply voltage: 100-240 V~, 50/60 Hz.
- Dissipated power: 0.9 W
- RF transmission power: < 100mW (20dBm)
- Frequency range: 2400-2483.5 MHz
- Terminals: 2 (L and N) for line and neutral
- 1 front push button for configuration and reset
- RGB LED indicating the device state
- Operating temperature: -10 ÷ +40 °C (indoor)
- Protection degree: IP40
- Configuration via View Wireless App.
- Controllable from View App and Alexa, Google Assistant and Siri voice assistants.
- Appliances of class II .
OPERATION.
LED indications
Manual procedures
During the first 5 minutes from power-up of the gateway and once you have waited for the product to be completely initialised (in other words until the white LED stops flashing after the first few seconds of being powered), the following operations can be carried out:
- Press the front push button for 10 s and the LED starts to flash blue; release the push button to proceed, via the View Wireless App, with associating the gateway with a system whose credentials you do not have (follow the self-guided procedure of the View Wireless App).
- Press the push button for 20 s and the LED starts to flash green; release the push button to delete the Wi-fi credentials only.
- Press the push button for 30 s and the LED begins to flash white quickly; release the push button to perform the gateway reset and restore the factory settings (so the wi-fi credentials, the mesh credentials, the system databases and all the associations with Homekit are deleted).
CONFIGURATION
For configuration operations on the Bluetooth system please see the instruction manual for the View Wireless App.
INSTALLATION RULES.
- Installation must be carried out by qualified persons in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.
- The device must be installed in flush mounting boxes or surface mounting boxes with Linea, Eikon, Arkè, Idea and Plana supports and cover plates.
- Install at a height of less than 2 m.
- An easily accessible omnipolar disconnection switch with a contact gap of at least 3 mm must be installed upstream of the device.
REGULATORY COMPLIANCE.
RED Directive. RoHS directive. Standards EN IEC 62368-1, EN 300 328, EN 301
489-17, EN IEC 62311, EN IEC 63000.
Vimar SpA declares that the radio equipment complies with Directive
2014/53/EU.
The full text of the EU declaration of conformity is on the product sheet
available on the following website: www.vimar.com
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces
of lead.
Apple HomeKit is a trademark of apple Inc. App Store is a service mark of
Apple Inc. To control this HomeKit-enabled accessory, iOS 9.0 or later is
recommended. Controlling this HomeKit-enabled
accessory automatically and away from home requires an apple TV with tvOS 10.0
or later or an iPad with iOS 10.0 or later or a HomePod/Siri set up as a home
hub.
The Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in
the U.S. and other countries and regions. App Store is a service mark of Apple
Inc.
Google, Google Play and Google Home are trademarks of Google LLC.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
FRONT AND BACK VIEW
- Front push button
- LED
N.B. Graphic representation of the Linea series. Position of terminals, wiring and functions also identical for Eikon, Arké, Idea and Plana.
WEEE – Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m2, if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health, and encourages the re-use and/or recycling of the construction materials.
Viale Vicenza, 14
36063 Marostica VI – Italy
30807-xx497 02 2403 www.vimar.com
Read More About This Manual & Download PDF:
References
- . Spend less. Smile more.
- Home automation, electrical equipment, smart home - Vimar energia positiva
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>