FORTIN EVO-ONE 116441 Toyota Rav4 2024 Push to Start Remote Starters and Alarm Systems Installation Guide
- July 10, 2024
- FORTIN
Table of Contents
- FORTIN EVO-ONE 116441 Toyota Rav4 2024 Push to Start Remote Starters and
- FAQ
- Vehicle Functions
- More Information
- DESCRIPTION
- WIRING CONNECTION
- DCRYPTOR PROGRAMMING PROCEDURE
- REMOTE STARTER PROGRAMMING PROCEDURE
- REMOTE STARTER FUNCTIONALITY
- More Information
- Contact
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FORTIN EVO-ONE 116441 Toyota Rav4 2024 Push to Start Remote Starters and
Alarm Systems
FAQ
Frequently Asked Questions
- Q: Can I install this product myself?
- A: This module must be installed by a qualified technician to prevent any damage to the vehicle.
- Q: Is a firmware update required for installation?
- A: Yes, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool to add firmware version and options.
Vehicle Functions
More Information
NOTES
- The vehicles OEM remote and SmartKey are still operable during remote start.
- NO KEY TAKEOVER
MANDATORY INSTALL
- HOOD PIN
- HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
- SECURITY STICKER
- Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
- THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
NOTES
DESCRIPTION
WIRING CONNECTION
THAR-TOY13
DCRYPTOR PROGRAMMING PROCEDURE
Parts required (not included)
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
KEY BYPASS PROGRAMMING PROCEDURE
REMOTE STARTER PROGRAMMING PROCEDURE
- REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
More Information
Module label
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
Contact
TECH SUPPORT
- Tél: 514-255-HELP (4357)
- www.fortinbypass.com
This guide may change without notice. See www.fortin.ca for latest version.
Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>