KARMA PAR12OQ Illuminatore LED Par Light Instruction Manual

KARMA PAR12OQ Illuminatore LED Par Light

THANK YOU FOR YOUR PURCHASE
The product you have purchased is the result of careful planning by specialized engineers. High quality materials were used for its construction, to ensure its functioning over time.
The product is manufactured in compliance with the strict regulations imposed by the European Union, a guarantee of reliability and safety.
Please read this manual carefully before starting using the device in order to take advantage of its full potential.
Hoping that you will be satisfied of your purchase, we thank you again for your trust in our brand and we invite you to visit our website www.karmaitaliana.it where you will find the whole range of our products, along with useful information and updates.

CAUTIONS AND WARNINGS

• Read and follow strictly the instructions contained in this manual.
• Keep this manual for future reference and include it if you give the product to another user.
• This device works with dangerous 11 D – 230V mains power. Do not open, do not disassemble and don’t try to operate inside it. In case of wrong use an electric shock may occur.
• The installation of the product must be carried out exclusively by specialized technicians.

In case of wrong installation or connections, the manufacturer doesn’t take any responsibility for damages to people or objects.

• Make sure that your power outlet voltage matches with the voltage set on the product.
• A wrong voltage would seriously damage the fixture.
• To avoid the risk of dangerous electric shocks, before turning on the product always check that it is connected to a circuit with suitable earth ground. Never cut internal or external ground wires.
• Before making any connection with other devices, check that all the fixtures are disconnected from the power source.
• If you need to suspend the product use only the original bracket. Make sure that the structure where it is mounted can support its weight and fasten it firmly, using also a safety cable.
• The product is not suitable for outdoor use. To avoid the risk of shortcircuits don’t expose it to high temperatures [above 40°), rain or humidity.
• Do not allow flammable liquid, water or metal objects to enter the product.
• Don’t touch the product with wet hands.
• Do not place any recipients filled with liquids, such as vases, on top of or directly next to the appliance.
• Install the product in a stable and ventilated position, far from heat sources and don’t obstruct the air vents.
• Use the fixture and its controls with due accuracy, avoiding falls, vibrations or impacts.
• If the product doesn’t turn on, check the fuse and if necessary replace it with one of the same type and rating, after disconnecting the fixture from power.
• In the event of a serious operating problem, stop using the product immediately.

Never try to repair it by yourself, but contact the authorized technical service center. Repairs carried out by unskilled persons could lead to serious damages both to the fixture and to people.

• Avoid direct eye exposure to the light source.

• Do not turn the product on and off at short intervals, it may reduce the life of the device.

• Disconnect the unit from power when it is not used.

• Never disconnect the product from the power source by pulling on the cord. Do not cut, kink, otherwise damage nor modify the power supply cord and periodically check that it is in good condition.

• Wait for the product to cool before cleaning or maintenance.

• To clean the product, use only a damp cloth, avoiding solvents or detergents of any kind.

• If the product is used in the presence of children they must be supervised.

• This symbol alerts you of the presence of important operating and maintenance instructions, in the manual or in the documentation accompanying the product

• This symbol alerts you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.

• The CE mark indicates that this product complies with the applicable European directives and their related standards. Compliance documentation in complete form is available at the company Karma ltaliana Sri

• Directive 2012/19/UE regarding electric and electronic equipment waste [WEEE].

• The symbol of the crossed-out dustbin indicates that the product at the end of its life must be collected separately from other waste . The user must , therefore , confer the fixture complete with all the essential components to an authorized disposal center for collection of electronic and electrical waste, or return it to the dealer when buying new equipment of equivalent type, at a rate of one to one, or one to zero if external dimension is less than 25cm.

• Appropriate separate collection to send the decommissioned equipment to recycling , treatment and environmentally compatible disposal helps to prevent negative impact on the environment and human health and promotes recycling of the materials making up the product. In Italy illegal dumping of the product by the user entails the application of administrative sanctions pursuant to Legislative Decree n. 49 (14/03/2014).

WARRANTY CONDITIONS
The product is covered by warranty according to current national and European regulations.
For detailed warranty conditions and RMA requests please refer to our website: www.karmaitaliana.it

• The warranty covers manufacturing defects and faults occurred in the first 2 years from the date of purchase. In case of purchase with invoice, the warranty is limited to 1 year.
• Damages caused by negligence or wrong use of the device are not covered by warranty.
• The warranty is no longer effective if the item is modified or disassembled by not authorized people.
• This warranty doesn’t necessarily envisage the product’s replacement.
• External components, batteries, knobs, switches and any removable or subject to wear and tear parts are excluded from warranty.
• Shipment for the return of faulty items is at expense and risk of the owner.
• For all intents and porpuses the warranty is effective only upon exhibition of the invoice or of the purchase receipt.
• If you send the product for repair, it must be shipped with complete original packaging: we therefore recommend to save it.

We also suggest to register your product on our website www.karmaitaliana.it, after signing in to access the reserved area. In this way you will have the possibility to keep track of the warranty validity and to receive updates on our items.

1. I MOUNT BRACKET
   Used to place the par light on a flat surface or hang it on stands. Loosen the knobs (3), adjust properly the bracket and tighten again the knobs (3).

2. RGBW LEDS
   When the fixture is on they produce the light beams. Take care not to cover them during installation.

3. JKNOBS
   Tighten them to fix the bracket in the desired position.

4. DISPLAY
   It shows main information and settings selected by means of the buttons (A- DJ. For the functions selectable from the display refer to the chart 1 on this page.

5. DMX IN SOCKET
   Connect here the 3 pin OMX cable coming from a OMX controller or from another fixture connected to a OMX system.

6. DMX OUT SOCKET
   Use this socket to connect another fixture to the OMX system.

7. POWER IN
   Connect here the power cord, which is to be connected on the other side to a 11 D/230V power outlet.

8. POWER OUT
   It is possible to connect here a cable that will carry power to the next fixture.

9. FUSE HOLDER
   If the fixture doesn’t turn on disconnect the power cord from the socket (7), then pull out the protection fuse from the small housing.
   If necessary replace the fuse with one of the same amperage.

10.  COOLING FAN
    Do not cover these openings, necessary for the internal ventilation of the fixture.

11. MENU BUTTON
    Useful to select the settings to be changed. Press it repeatedly to skip from a function to another. Once completed the changes press the ENTER [DJ button to exit.
    Refer to the charts 1 and 2.

12. UP BUTTON
    When pressed it increases the value shown on the display.

13.  DOWN BUTTON
    When pressed it decreases the value shown on the display.

14.  ENTER BUTTON
    Enter button. It confirms the selection made with the buttons UP /DOWN [B-C].

INTRODUCTION TO OMX CONNECTION

• In a OMX 512 connection there are 512 available channels. Each OMX fixture uses one or more channels to manage its functions. The user must assign a starting address to each OMX fixture connected to the system. This address will indicate the first channel used by the controller. You have to plan the starting address choice in orderto avoid the channels’ overlapping. Otherwise the fixture wouldn’t work correctly.
• Example: If you need to connect 3 OMX fixtures, each with 1 D channels, the first unit is to be set on address 1, the second unit on address 11 and the third one on address 21. Anyway you can set the same starting address on more devices if you wish themto operate in synchrony. OMX devices are conceived to receive data through a serial Daisy Chain connection. With this kind of connection the data output of a fixture is connected to the data input of the following one. The connection order of the devices is not important and it doesn’t affect on how the controller interacts with each of them. We suggest to put them in the easiest and most direct sequence for cable connection. The signal cable length should not be more than 1 DD m to avoid interferences with other signals or electric devices. To set the address you want to assign to the fixture [from 001 to 512), press the MENU [Al key until the display shows the symbol “d”. Then, by means of the UP and DOWN keys, set the address and confirm with ENTER.
• To operate correctly with OMX systems it is necessary to know the number of channels available on each connected fixture and the function of these channels.
• This fixture operates with B channels.
• The chart 2 shows the functions related to each channel in OMX mode.
• Before using the fixture it would be advisable to take a specific course on OMX systems for full understanding of its potential and functions.

OMX CONNECTORS
When buying or creating OMX cables it is necessary to know exactly how the XLR type 3 pin connectors are to be connected. Please refer to the below diagrams.

TECHNICAL SPECIFICATIONS

Prodotto da / Produced by: KARMA ITALIANA SRL Via Gozzano 38 bis
21052, Busto Arsizio [VA) – Italy

www.karmaitaliana.it

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>