COLSUR S05 Sunrise Alarm Clock Charger Speaker User Manual

COLSUR S05 Sunrise Alarm Clock Charger Speaker

Thank you for choosing our products. Please read the product instructions carefully before use.

FEATURES

• Simple and Exquisite
• Night Light
• Bluetooth Speaker
• Alarm Clock
• Wireless Charger
• Charging Distances6mm

PRODUCT DIAGRAM

1. Lamp chimney
2. Wireless charging area
3. Mobile phone holder
4. Silicone buttons
5. Speaker cavity
6. Function button
7. Touch night light switch
8. Type-C input port
9. USB and Type-C output interface
10. Bluetooth switch
11. Silicone fool pads

OPERATION METHOD

1. lnsert the USB cable into the power adapter, and connect the Type-C to S05.
2. Place the required wireless charging device in the charging indication area of this product. The charging indicator light [ f ] in the clock display area will always be on. When it is fully charged, the indicator light turns off.

NIGHT LIGHT FUNCTION

• Touch once to turn on the light, the brightness Is 30%,
• Touch twice to change the brightness to 70%
• Touch three times to change brightness to 100%
• Touch four times to turn off the light
• Cycle through to turn on the lights sequentially

BlITTON FUNCTIONS

ADJUST THE SCREEN BRIGHTNESS

• Short press [ ] to adjust the clock screen brightness.
• High brightness – medium brightness – low brightness – off, cycling to adjust the screen brightness.

HOW TO SET THE CLOCK

In normal clock display mode:

• Short Tap I ] , Clock DJ splay Area starts to flash, enter the clock setting mode; ShortTap increase the digits, ShortTap Decrease the digits
• Short press again enter the minute setting mode; Short Tap increase the digits, Short Tap   Decrease the digits
• Long Press Save the current settings and return to the normal time display

HOW TO SWITCH BETWEEN 12/24 HOURS

In normal clock display mode

• Short Tap 3 times, The clock display area blinks 12/24, entering the setting mode
• Short Tap / Switch between 12/24 hours
• Long Press Save the current settings and return to the normal time display

HOW TO SET THE ALARM CLOCK
In normal display mode: Alarm Clock 1 setting method

• Long press to enter the alarm setting state. The Alarm 1 ) icon and time on the screen start to flash, entering the alarm 1 clock setting state.
• Short press again to switch minutes, the minutes will start to flash and enter the minute setting state.
  Short press to increase the number, short press to decrease the number. Long Press (M) Save the current settings and return to the non-native display

In normal display mode: Alarm Clock 2 setting method

• Long press to enter the alarm 1 setting state, and long press again to enter the alarm 2 setting state. The alarm 2 icon and clock start to flash on the screen.
• Short press to Increase the number, short press to decrease the number.
• Short press  again to switch minutes, and the minutes will start to flash and enter the minute setting state.
• Short press to increase the number, and short press to decrease the number. Long Press IMI Save the current settings and return to the normal time display

On/Off

After you save the alarm time setting, turn on or off the alarm 1/2 by short press

Alarm 1 Sound and Light Settings

Short press to select the sound source, short touch the night light switch to choose the lighting and press the alarm 10) clock display area twice, the alarm icon will flash three times and then turn off. Indicating a successful sound and light settings.”

Alarm 2 Sound and Light Settings

Short press to select the sound source, short touch the night light switch to choose the lighting. Short press the alarm clock display area three times, the alarm icon will flash three times and then turn off, indicating a successful sound and light settings.

Note:

Alarm volume changes from low to high (For example: if the volume Ts set to level 3, the alarm volume will gradually increase from level 1 to level 3, and so on)
When your natural sound is selected and set, you can long press to turn off the sound
There are 7 sound sources (Birds – Ocean – Rain – Stream -Trees – Wind – Dripping Nature Sounds) and 3 Light Modes (Light Brightness 30%- 70%- 100%).

Wake-Up Function
After setting the alarm, the light will automatically turn on half an hour in advance, gradually changing from dark to bright. For example, Tf the alarm is set for 7 o’clock, the lights will slowly brighten starting at 6:30.

Snooze Mode

• When the alarm rings, press to snooze. The snooze duration Is S minutes, and you can snooze up to 4 times.
• When the alarm enters snooze mode, the alarm Icon flashes in the screen display area
• If the snooze is not finished, a long touch on the night light switch will cancel the snooze mode.

HOW TO USE THE BLUETOOTH SPEAKER

After plugging in the power, long press or + M to turn on the Bluetooth function. You will hear a prompt sound, indicating that the Bluetooth function has been activated. The Bluetooth icon (Bn in the clock display area will flash, indicating that it is in pairing mode. At this time, turn on the Bluetooth function of your phone, search for Bluetooth speakers, and you will see “505” among the available Bluetooth devices. Click to select the”SOS” device name and it will automatically enter pairing mode. When the connection (1n is successful, you will hear a tone. To turn off Bluetooth, long press or

• M again.

HOW TO USE NATURE SOUNDS FOR SLEEP

In clock mode:

Short press to activate natural sound; long press to deactivate natural sound.

When natural sound is enabled:

• Short press to cycle through adjusting the volume.
• Short press to cycle through switching between bird sounds-ocean rain- and stream-tree-dripping nature sounds.
• Double-tap to start flashing at 30 minutes, entering the countdown setting. Short press to cycle through 60-90-30. After 3 seconds of no further action, the countdown begins, and the clock display area shows the remaining countdown time. Once the countdown ends, the natural sound is automatically turned off. If you want to cancel the countdown before it ends. double-tap to exit the countdown

COMPATIBLE DEVICES

This product supports fast wireless charging and complies with the QI wireless charging standard. It uses magnetic induction to achieve short-range wireless power transmission. This device is compatible with all wireless charging devices that meet the QI standard. When using a 5V output adapter, wireless charging supports a SW load. When using an adapter that complies with QC2.0 and above standards, wireless charging supports a 10W load. It also features overcharge protection {9V) and overcurrent protection (2A).

SPEAKER SPECIFICATIONS

• Speaker Specifications
• Bluetooth Range: 10m
• Speaker Power: 4n5W*2
• Speaker Specifications: 50mm

PRECAUTIONS

• Do not use or store this product for extended periods in direct sunlight or high-temperature environments.
• Do not charge near magnetic cards, magnetic recording media, or precision Instruments.
• Do not disassemble or modify this product.
• Do not touch the AC adapter with wet hands.
• Please keep this product away from water or other liquids.
• If you want to clean this product, please disconnect the power.
• Product operating temperature range: 20-4S”C.

WIRELESS CHARGING SPECIFICATIONS

• Product Materials: Imported ABS+PC+Metal
• Power Input DCSV/2.lA 9V/2.1A
• Charging Efficiency: 75%
• Power: 5Wfi.5W/10W/1 SW
• Product Dlmenslons: 231″126 216mm
• The power charging port is an international standard Type-C port.

WARRANTY & CUSTOMER SUPPORT

For questions, support, or warranty claims, contact us at the address below that corresponds with your region.
Please include your Amazon order number and product model number.
Amazon orders: senmeituo2021@gmail.com
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>