KARMA MXD 06 Microphone Mixer Instruction Manual
- March 22, 2024
- KARMA
Table of Contents
MXD 06
MXD 08
MXD 10
Microphone mixer
Instruction Manual
MXD 06 Microphone Mixer
OTHER LANGUAGES
https://www.glemm.eu/ec_product.php?prodid=7420&lng=2
https://www.glemm.eu/ec_product.php?prodid=7420&lng=2
INSIDE THE PACKAGING
When you open the package check that product is in good condition and that all
the parts are present. Immediately notify the seller if any part is damaged or
missing.
FOLLOW US AND DISCOVER THE LAST NEWS
By purchasing your new product you have just started an extraordinary journey
across the world of KARMA products.
Thousands of constantly updated items that you can discover also on our social
channels. Sign up now and don’t miss the posts on the most interesting
products of the moment.
INSTAGRAM:
https://www.instagram.com/karmaitaliana
FACEBOOK:
https://www.facebook.com/karmaitaliana.it
YOUTUBE:
https://www.youtube.com/@karma.italiana
The manufacturer, in order to improve its products, reserves the right to
modify their characteristics whether technical or aesthetic, at any time and
without notice.
THANK YOU FOR YOUR PURCHASE
The product you have purchased is the result of careful planning by
specialized engineers. High quality materials were used for its construction,
to ensure its functioning over time.
The product is manufactured in compliance with the strict regulations imposed
by the European Union, a guarantee of reliability and safety.
Please read this manual carefully before starting using the device in order to
take advantage of its full potential.
Hoping that you will be satisfied of your purchase, we thank you again for
your trust in our brand and we invite you to visit our website
www.glemm.eu where you will find the whole range of our
products, along with useful information and updates.
ATTENTION: This manual refers to 3 different devices that differ from
each other only in the number of microphone channels supported (4, 6 or 8).
CAUTIONS AND WARNINGS
- Read and follow strictly the instructions contained in this manual.
- Keep this manual for future reference and include it if you give the product to another user.
- Do not open or take apart the device and don’t make changes to it.
- The installation of the product must be carried out exclusively by skilled persons. In case of wrong installation or connections, the manufacturer doesn’t take any responsibility for damages to people or objects.
- Before making any connection with other devices, check that all the fixtures are turned off and disconnected from the power source.
- The product is not suitable for outdoor use. To avoid the risk of shortcircuits don’t expose it to high temperatures (above 40°), rain or humidity.
- Do not allow flammable liquid, water or metal objects to enter the product.
- Don’t touch the product with wet hands.
- Do not place any recipients filled with liquids, such as vases, on top of or directly next to the appliance.
- Install the product in a stable and ventilated position, far from heat sources and don’t obstruct the air vents.
- Use the fixture, its controls and the accessories with due accuracy, avoiding falls, vibrations or impacts.
- In the event of a serious operating problem, stop using the product immediately. Never try to repair it by yourself, but contact the authorized technical service center. Repairs carried out by unskilled persons could lead to serious damages both to the fixture and to people.
- Do not turn the product on and off at short intervals, it may reduce the life of the device.
- Disconnect the unit from power when it is not used.
- Do not cut, kink, otherwise damage nor modify the power adaptor’s cable and periodically check that it is in good condition.
- Wait for the product to cool before cleaning or maintenance.
- To clean the product, use only a damp cloth, avoiding solvents or detergents of any kind.
- If the product is used in the presence of children they must be supervised.
- To prevent possible hearing damage, do not listen at high volume levels for long periods.
This symbol alerts you of the presence of important operating and maintenance
instructions, in the manual or in the documentation accompanying the product
This symbol indicates a risk of electric shock in case of wrong use or
alteration of the product.
**** The CE mark indicates that this product complies with the applicable
European directives and their related standards. Compliance documentation in
complete form is available at the company Karma Italiana Srl
Directive 2012/19/UE regarding electric and electronic equipment waste (WEEE).
The symbol of the crossed-out dustbin indicates that the product at the end of
its life must be collected separately from other waste. The user must,
therefore, confer the fixture complete with all the essential components to an
authorized disposal center for collection of electronic and electrical waste,
or return it to the dealer when buying new equipment of equivalent type, at a
rate of one to one, or one to zero if external dimension is less than 25cm.
Appropriate separate collection to send the decommissioned equipment to
recycling , treatment and environmentally compatible disposal helps to prevent
negative impact on the environment and human health and promotes recycling of
the materials making up the product. In Italy illegal dumping of the product
by the user entails the application of administrative sanctions pursuant to
Legislative Decree n. 49 (14/03/2014).
WARRANTY CONDITIONS
The product is covered by warranty according to current national and European
regulations.
For detailed warranty conditions and RMA requests please refer to our website:
www.karmaitaliana.it –
www.glemm.eu
- The warranty covers manifacturing defects and faults occurred in the first 2 years from the date of purchase. In case of purchase with invoice, the warranty is limited to 1 year.
- Damages caused by negligence or wrong use of the device are not covered by warranty.
- The warranty is no longer effective if the item is modified or disassembled by not authorized people.
- This warranty doesn’t necessarily envisage the product’s replacement.
- External components, batteries, knobs, switches and any removable or subject to wear and tear parts are excluded from warranty.
- Shipment for the return of faulty items is at expense and risk of the owner.
- For all intents and porpuses the warranty is effective only upon exhibition of the invoice or of the purchase receipt.
- If you send the product for repair, it must be shipped with complete original packaging: we therefore recommend to save it.
We also suggest to register your product on our website www.karmaitaliana.it, after signing in to access the reserved area. In this way you will have the possibility to keep track of the warranty validity and to receive updates on our items.
SCHEMA DI COLLEGAMENTO
This mixer is suitable for a broad range of uses, both in the musical field
and to manage conferences, gyms, schools etc… The above diagram shows a
typical situation, where both microphones and musical instruments are
connected. The mixed signal, included the one coming for example from a
smartphone via bluetooth, is sent to an amplifier and then to the speakers (or
directly to amplified speakers. A further 2 amplified speakers have been
connected to the “tape out” sockets and they are uses as monitor speakers.
REAR PANEL
The picture shows the power supply socket (30) and the on/off switch (31) on
the mixer’s rear panel. Always make sure to connect the fixture with the
correct voltage. In case of necessity the fuse, contained in the power socket,
can be replaced after disconnecting the mixer from the mains.
OPERATION
Before making any connection, check that the unit is unplugged from the
electrical outlet. All connections must be made with the appliance turned off.
LINE IN/MIC (1-2): These sockets are used for microphone or line signals.
By using a XLR connector (1), you will obtain a balanced signal and it will be
possible to use the +48V phantom power for condenser microphones.
Warning: If the +48V phantom power supply is activated, don’t connect
unbalanced sources to the XLR input. To avoid audio interferences, always
disable the channel when you turn on/off the +48V phantom power and when you
connect or disconnect the cables.
A 6,3mm unbalanced socket (2) is also available for dynamic microphones
equipped with this kind of connector.
TRIM (3) : Use it to adjust the input signal’s gain level of the related
channel. We suggest to set the vu-meter on the middle level “0”, so that the
PEAK led doesn’t remain steady on. Once the gain level is set use the specific
faders (8) to balance each mixing signal and to adjust the channels’ volumes.
EQ (4): Use these 3 controls to adjust how treble, midrange and bass
frequencies affect the channel’s audio signal.
FX (5): It adjusts the level of the effect applied to the channel’s audio
signal.
PAN (6): It has the function of distributing the signal level between the
left and right channels, in order to obtain a stereo like effect.
ON/OFF (7): Press this button to activate or deactivate the mixing
channel. When pressed the button will light up.
SLIDER (8): Move it to raise the volume of the mixing channel. The PEAK
led indicates signal peaks and must never remain lit steadily. The SOLO button
allows you to activate the headphone pre-listening on this channel.
CD/TAPE (9): It is possible to connect to these sockets output and input
line signals, often intended for recorders. The mixing volume can be adjusted
through the rotating control (28).
FX OUT (16) : It sends the signal of the channels set through the
rotating knob FX (5). The processed signal will be sent back to the RETURNS
(17) socket and then mixed.
MAIN OUT (10): Two XLR sockets used as output of the mixed signal for the
amplifier.
DISPLAY BT/MP3 (19): It shows information about the current track (time
and track number) as well as those about track repeating and bluetooth
section.
DISPLAY DSP (12): It shows the currrent DSP effect. 16 settings are
available. The DSP operates at 24 bits and 40 Khz.
USB SOCKET (18): You can connect here a USB stick or an external disk to
play the MP3 songs it contains.The device must be in FAT 32 format.
DSP MODULE: It includes the main knob (13) to select the effect (by
rotating it) and to confirm the choice (by pressing it), as well as a further
two rotating controls to adjust the level of the effect (14) and its
parameters (15).
MP3/REC MODULE (20): It includes the track selector (press to confirm the
choice), the controls to adjust the tracks’ treble and bass and two buttons
for song playback (one, all, a folder or random) and for recording. Press the
REC button to set the recording function, which can be started or paused by
pressing the main knob. Press again the REC button to stop recording.
+48V PHANTOM (11): It activates the +48V power supply on the XLR sockets
of channels 1-4. It is intended to power condenser microphones requiring this
voltage.
Warning: don’t connect further microphones when the button is pressed;
you will risk to damage the fixtures.
EQUALIZER (27): 7-band equalizer for a perfect equalization of the mixed
signal.
VU METER (21): It shows the output or prelistening signal’s level. It
also indicates the signal peaks. Take care that the levels are not too high to
avoid distorsions or damages to the fixtures.
EFFECT (22): It adjusts the level of the effects on the whole mixing.
MP3/BT (23): It adjusts the volume of the Mp3 module when mixing.
MAIN L/R (24): These two sliders adjust the level of the master output
volume.
BLUETOOTH (25): Press and hold to activate the Bluetooth receiver. Scan
for the mixer on the bluetooth menu of your smartphone and pair it to send
audio to the mixer. Keep pressed again the button to exit the bluetooth
function. The basic controls (forward, back, play/stop) can be adjusted both
from the mixer and from the smartphone.
PHONES SOCKET (26): Socket for headphones with 6,3 mm jack. To listen for
the channels in your headphone press the related button “SOLO”. The PFL led
next to the headphone volume will light up. When prelistening is active the
VU-METERS (21) will show the headphone level.
AUX RETURN (29): It adjusts level of the AUX return signal.
PFL/PHONES (30): It adjusts the level of the headphone prelistening
signal.
TECHNICAL SPECIFICATIONS
POWER SUPPLY | AC ~ 100V -240V |
---|---|
TOTAL CHANNELS | 6 (MXD 06), 8 (MXD 08), 10 (MXD 10) |
FUNCTIONS | Mp3 (via USB – FAT 32), Bluetooth, Echo, REC, PC link, FX in/out, |
PFL
PHANTOM| +48V, on XLR balanced channels
MICROPHONE INPUTS| 4 (MXD 06), 6 (MXD 08), 8 (MXD 10), balanced XLR connectors
Freq. response: <10Hz-150kHz(-1dB)/ <10Hz-200kHz(-3dB) Gain range: +10 – 60dB
Max input level: + 12dBu – +10dB (gain)
LINE INPUTS| 4 (MXD 06), 6 (MXD 08), 8 (MXD 10), balanced XLR connectors Freq.
response: <10Hz-150kHz(-1dB)/ <10Hz-200kHz(-3dB) Gain range: +10 – 60dB Max
input level: + 12dBu – +10dB (gain)
STEREO INPUTS| 1 via RCA – Max input level: +22dBu
AUX SEND| 6,3mm jack unbalanced connector – Max output level: +22 dBu
AUX RETURN| 6,3mm jack balanced connector- Max input level: +22 dBu
MAIN OUTPUTS| XLR balanced connector – Max output level+28dBu / +22dBu
HEADPHONE OUTPUTS| 6,3mm jack connector – Max output level +19dBu/150
Ω(+25dBm)
DSP| 24bit – Sigma-Delta 64/128 times oversampling Sampling rate 40 kHz
EFFECTS| 16
EQUALIZER| 7 Bands Mono channels tones : low, mid , high Stereo channels
tones: low, low-mid, high-mid, high
BLUETOOTH| Vers. 5.0
RECORDING| On USB
VU-METERS| L/R – 11 leds
DIMENSIONS| 295 x 100 x 310 mm (MXD 06) 295 x 100 x 360 mm (MXD 08) 295 x 100
x 410 mm (MXD 10)
WEIGHT| 2,9 Kg (MXD 06) 3,35 Kg (MXD 08) 3,85 Kg (MXD 10)
EU COMPLIANCE DECLARATION
Hereby, KARMA ITALIANA SRL declares that mixer MXD 06, MXD 08 and MXD 10 are
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
www.karmaitaliana.it. Karma Italiana Srl
Prodotto da/ produced by:
KARMA ITALIANA SRL
Via Gozzano, 38 bis
21052, Busto Arsizio (VA) – Italy Made in ChinaVer. 23.1
www.glemm.eu
References
- www.glemm.eu - pa-system e impianti di filodiffusione professionali
- www.glemm.eu - pa-system e impianti di filodiffusione professionali
- KARMA ITALIANA Srl
- Login • Instagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>