KARMA SET 8042 4 Radiomicrofoni UHF Wireless Microphones Instruction Manual
- June 17, 2024
- KARMA
Table of Contents
KARMA SET 8042 4 Radiomicrofoni UHF Wireless Microphones
PACKAGING CONTENT
When you open the package check that the product is in good condition and that
all the parts are present. Immediately notify the seller if any part is
damaged or missing.
EU COMPLIANCE DECLARATION
Hereby, KARMA ITALIANA SRL declares that the radio equipment type Wireless Microphone SET 8042 series complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.karmaitaliana.it.
WARNING: In the countries indicated in the below chart the operating frequencies of this product might be not authorized, be subject to local restrictions or limitations of use, and require a general authorization or an individual license for use. Please contact your telecommunications authority for detailed information about authorized frequencies and ERP power levels in your country or your region for wireless microphones.
The manufacturer, to improve its products, reserves the right to modify their characteristics whether technical or aesthetic, at any time and without notice.
THANK YOU FOR YOUR PURCHASE
The product you have purchased is the result of careful planning by
specialized engineers. High-quality materials were used for its construction,
to ensure its functioning over time. The product is manufactured in compliance
with the strict regulations imposed by the European Union, a guarantee of
reliability and safety. Please read this manual carefully before starting
using the device to take advantage of its full potential. Hoping that you will
be satisfied with your purchase, we thank you again for your trust in our
brand and we invite you to visit our website
www.karmaitaliana.it where you will find the
whole range of our products, along with useful information and updates. This
manual refers to 4 models of the SET 8042 series, differing from each other in
the combination of supplied transmitters.
CAUTIONS AND WARNINGS
-
Read and follow strictly the instructions contained in this manual.
-
Keep this manual for future reference and include it if you give the product to another user.
-
Do not open or take apart the device and don’t make changes to it.
-
The installation of the product must be carried out exclusively by skilled persons. In case of wrong installation or connections, the manufacturer doesn’t take any responsibility for damages to people or objects.
-
Before making any connection with other devices, check that all the fixtures are turned off and disconnected from the power source.
-
The product is not suitable for outdoor use. To avoid the risk of shortcircuits don’t expose it to high temperatures [above 40°), rain, or humidity.
-
Do not allow flammable liquid, water, or metal objects to enter the product.
-
Don’t touch the product with wet hands.
-
Do not place any recipients filled with liquids, such as vases, on top of or directly next to the appliance.
-
Install the product in a stable and ventilated position, far from heat sources, and don’t obstruct the air vents.
-
Use the fixture, its controls, and the accessories with due accuracy, avoiding falls, vibrations, or impacts.
-
In the event of a serious operating problem, stop using the product immediately. Never try to repair it by yourself, but contact the authorized technical service center. Repairs carried out by unskilled persons could lead to serious damages both to the fixture and to people.
-
Do not turn the product on and off at short intervals, it may reduce the life of the device.
-
Disconnect the unit from power when it is not used.
-
Do not cut, kink, or otherwise damage nor modify the power adaptor’s cable, and periodically check that it is in good condition.
-
Do not leave the batteries inside the transmitters if you do not use them for a long time, to avoid acid leakage which could damage the contacts.
-
Wait for the product to cool before cleaning or maintenance.
-
To clean the product, use only a dry or slightly damp cloth, avoiding solvents or detergents of any kind.
-
If the product is used in the presence of children they must be supervised.
-
This symbol alerts you of the presence of important operating and maintenance instructions, in the manual or the documentation accompanying the product
-
This symbol indicates a risk of electric shock in case of wrong use or alteration of the product.
-
The CE mark indicates that this product complies with the applicable European directives and their related standards. Compliance documentation in complete form is available at the company Karma Italiana Sri
Directive 2012/19/UE regarding electric and electronic equipment waste [WEEE). -
The symbol of the crossed-out dustbin indicates that the product at the end of its life must be collected separately from other waste. The user must, therefore, confer the fixture complete with all the essential components to an authorized disposal center for collection of electronic and electrical waste, or return it to the dealer when buying new equipment of equivalent type, at a rate of one-to-one, or one-to-zero if the external dimension is less than 25cm. Appropriate separate collection to send the decommissioned equipment to recycling, treatment, and environmentally compatible disposal helps to prevent negative impacts on the environment and human health and promotes recycling of the materials making up the product. In Italy, illegal dumping of the product by the user entails the application of administrative sanctions under Legislative Decree n. 49 (14/03/2014).
-
This device is powered by batteries subject to European Directive 2013/56/EU, which cannot be disposed of with normal domestic waste. Find out about the local regulations regarding the separate collection of batteries: correct disposal allows to avoid negative consequences for the environment and health.
WARRANTY CONDITIONS
The product is covered by warranty according to current national and European regulations. For detailed warranty conditions and RMA requests please refer to our website www.karmaitaliana.it.
- The warranty covers manufacturing defects and faults that occurred in the first 2 years from the date of purchase. In case of purchase with invoice, the warranty is limited to 1 year.
- Damages caused by negligence or wrong use of the device are not covered by warranty.
- The warranty is no longer effective if the item is modified or disassembled by unauthorized people.
- This warranty doesn’t necessarily envisage the product’s replacement.
- External components, batteries, knobs, switches, and any removable or subject-to-wear-and-tear parts are excluded from the warranty.
- Shipment for the return of faulty items is at the expense and risk of the owner.
- The warranty is effective only upon the exhibition of the invoice or of the purchase receipt.
- If you send the product for repair, it must be shipped with complete original packaging: we therefore recommend saving it.
We also suggest to register your product on our website www.karmaitaliana.it, after signing in to access the reserved area. In this way, you will have the possibility to keep track of the warranty validity and to receive updates on our items.
OVERVIEW
Front panel
Back panel
FUNCTIONS
-
DISPLAY
It shows the main information on the microphones you are using. -
SET /IOCK BUTTON
Prass it to have the possibility to set manually the channel’s frequency.
Once Preased, use the IR (4) and SCAN (3) buttons to scroll through these selectable frequencies. After selecting the frequency press again the LOCK (2) button. -
SCAN / VOL BUTTON
A short press reduces the channel’s volume. With a long press, it starts to look for a free frequency in the operating areas. -
IR / VOL + BUTTON
A short press increases the channel’s volume. A long press activates the “pairing” mode. Place the transmitter near the IR (4B) sensor of the receiver. -
ON/ OFF BUTTON
Use it to turn on/off the receiver. -
ANTENNAS
Insert here the two included antennas. -
MIXED XLR OUTPUT
Use this balanced output to obtain the mixed signal of the 4 wireless microphones. -
JACK 6,3mm MIXED SOCKET
Use this unbalanced output to obtain the mixed signal of the 4 wireless microphones. -
XLR OUTPUTS
Use these balanced outputs to obtain the individual signals of the 4 wireless microphones. By sending these signals to an audio mixer it will be possible to adjust volume and tone of each microphone. -
POWER SUPPLY SOCKET
Connect the included power adaptor to this socker to power the fixture. -
RACK MOUNT BRACKET
Thanks to this bracket it is possible to mount the receiver in a standard 19″ rack. The oval hole in the middle will be useful if you need to connect front antennas (not included).
HANDHELD MICROPHONE
- Before using the microphone unscrew the cap (14) and insert two AA batteries.
- Each handheld transmitter must always operate exclusively in combination with its own receiver base. The frequency of the microphone and of the base must be the same to operate correctly.
- After turning on the receiver base, press the button (13) to turn on the transmitter. The display (12) will show main information.
- You can set the transmission frequency, by choosing one of the 50 available frequencies for each channel. To do that select the desired frequency on the base, by means of the buttons SET (2) or SCAN (3) and then press the IR (4) button to send the frequency to the transmitter. During pairing take care that the infrared sensors are perfectly aligned and at a distance of approximately 2 cm.
- It is possible to set the transmission power on 2 positions. Use the selector (15) for selection.
BODYPACK MICROPHONE
- Before using the microphone open the cover (20) and insert two (AA) batteries, then plug the headset microphone into the plug (17).
- Each bodypack transmitter must always operate exclusively in combination with its own receiver base. The frequency of the microphone and of the base must be the same to operate correctly.
- After turning on the receiver base, press the button (19) to turn on the transmitter. The display (18) will show main information.
- You can set the transmission frequency, by choosing one of the 50 available frequencies for each channel. To do that select the desired frequency on the base, by means of the buttons SET (2) or SCAN (3) and then press the IR (4) button to send the frequency to the transmitter. During pairing take care that the infrared sensors are perfectly aligned and at a distance of approximately 2cm. The bodypack’s sensor is in the battery housing.
- It is possible to set the transmission power on 2 positions. Use the selector (15) for selection.
DESK MICROPHONE
- Before using the microphone open the cover on its bottom and insert 2 x AA batteries.
- Each desk microphone must always operate exclusively in combination with its own receiver base. The frequency of the microphone and of the base must be the same to operate correctly.
- After turning on the receiver base, press the button (21) to turn on the transmitter. The display (B) will show main information, such as the signal power (A) or the battery level (C).
- You can set the transmission frequency, by choosing one of the 50 available frequencies for each channel. To do that select the desired frequency on the base, by means of the buttons SET (2) or SCAN (3) and then press the IR (4) button to send the frequency to the transmitter. During pairing take care that the infrared sensors are perfectly aligned and at a distance of 2 cm.
- It is possible to set the transmission power (RF) on 2 positions. To do that press twice the SET (E) button and use the buttons DW e UP (D-F) to adjust the desired power. After a few seconds the display will stop flashing.
- When the microphone is turned on the ring (22) on the goosenect top will light up. The packaging also includes some windscreen sponges to be applied on the microphone.
TECHNICAL SPECIFICATIONS
AVAILABLE CONFIGURATIONS
Produced by:
KARMA ITALIANA SRL
Via Gozzano 38 bis
21052, Busto Arsizio (VA) – Italy
www.karmaitaliana.it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>