KARMA SET 8200 Radio Wireless Microphones Instruction Manual

KARMA SET 8200 Radio Wireless Microphones

Product Information

This product is a wireless microphone system consisting of various models: SET 8200, SET 8200LAV, SET 8202, SET 8202LAV, and SET 8202PL. It is manufactured by Karma Italiana Srl. The product is compliant with Directive 2014/53/EU and the EU declaration of conformity can be found on the website www.karmaitaliana.it. Please note that the operating frequencies of this product may be subject to local restrictions or limitations. It is advised to contact your telecommunications authority for detailed information about authorized frequencies and power levels in your country or region.

Product Usage Instructions

1. When you receive the product, open the package and check that all the components are present and in good condition. If any part is damaged or missing, notify the seller immediately.
2. This product operates with batteries that fall under European Directive 2013/56/EU. These batteries should not be disposed of with regular household waste. Please follow local regulations for proper disposal to avoid negative consequences for the environment and health.
3. The front and rear panels of the different models (SET 8200, SET 8200LAV, SET 8202, SET 8202LAV, SET 8202PL) have various buttons and features:
   • TASTO ON/OFF: Power button to turn the device on and off.
   • VOL / VOL A: Use this button to adjust the volume of the wireless microphone or the first microphone on the SET 8202 series.
   • VOL B: Use this button to adjust the volume of the second wireless microphone (only available on the SET 8202 series).
   • DISPLAY : Shows the main functions in use.
   • ANTENNE: Position the antennas upwards to optimize signal reception.

INSIDE THE PACKAGING

When you open the package check that the product is in good condition and that all the parts are present. Immediately notify the seller if any part is damaged or missing.

WARNING : In the countries indicated in the below chart the operating frequencies of this product might be not authorized, be subject to local restrictions or limitations of use, and require a general authorization or an individual license for use. Please contact your telecommunications authority for detailed information about authorized frequencies and ERP power levels in your country or your region for wireless microphones.

The manufacturer, to improve its products, reserves the right to modify their characteristics whether technical or aesthetic, at any time and without notice.

THANK YOU FOR YOUR PURCHASE

The product you have purchased is the result of careful planning by specialized engineers. High-quality materials were used for its construction, to ensure its functioning over time. The product is manufactured in compliance with the strict regulations imposed by the European Union, a guarantee of reliability and safety. Please read this manual carefully before starting using the device to take advantage of its full potential. Hoping that you will be satisfied with your purchase, we thank you again for your trust in our brand and we invite you to visit our website www.karmaitaliana.it where you will find the whole range of our products, along with useful information and updates. This manual refers to the models with 1 or 2 microphones of series SET 820X and their versions.

CAUTIONS AND WARNINGS

• Read and follow strictly the instructions contained in this manual.
• Keep this manual for future reference and include it if you give the product to another user.
• Do not open or take apart the device and don’t make changes to it.
• The installation of the product must be carried out exclusively by skilled persons. In case of wrong installation or connections, the manufacturer doesn’t take any responsibility for damages to people or objects.
• Before making any connection with other devices, check that all the fixtures are turned off and disconnected from the power source.
• The product is not suitable for outdoor use. To avoid the risk of shortcircuits don’t expose it to high temperatures (above 40°), rain, or humidity.
• Do not allow flammable liquid, water, or metal objects to enter the product.
• Don’t touch the product with wet hands.
• Do not place any recipients filled with liquids, such as vases, on top of or directly next to the appliance.
• Install the product in a stable and ventilated position, far from heat sources, and don’t obstruct the air vents.
• Use the fixture, its controls, and the accessories with due accuracy, avoiding falls, vibrations, or impacts.
• In the event of a serious operating problem, stop using the product immediately. Never try to repair it by yourself, but contact the authorized technical service center. Repairs carried out by unskilled persons could lead to serious damage both to the fixture and to people.
• Do not turn the product on and off at short intervals, it may reduce the life of the device.
• Disconnect the unit from power when it is not used.
• Do not cut, kink, or otherwise damage nor modify the power adaptor’s cable, and periodically check that it is in good condition.
• Wait for the product to cool before cleaning or maintenance.
• To clean the product, use only a damp cloth, avoiding solvents or detergents of any kind.
• If the product is used in the presence of children they must be supervised.

NOTES

• This symbol alerts you of the presence of important operating and maintenance instructions, in the manual or the documentation accompanying the product
• This symbol indicates a risk of electric shock in case of wrong use or alteration of the product.
• The CE mark indicates that this product complies with the applicable European directives and their related standards. Compliance documentation in complete form is available at the company Karma Italiana Srl
• Directive 2012/19/UE regarding electric and electronic equipment waste (WEEE). The symbol of the crossed-out dustbin indicates that the product at the end of its life must be collected separately from other waste. The user must, therefore, confer the fixture complete with all the essential components to an authorized disposal center for collection of electronic and electrical waste, or return it to the dealer when buying new equipment of equivalent type, at a rate of one-to-one, or one-to-zero if the external dimension is less than 25cm. Appropriate separate collection to send the decommissioned equipment to recycling, treatment, and environmentally compatible disposal helps to prevent negative impacts on the environment and human health and promotes recycling of the materials making up the product. In Italy, illegal dumping of the product by the user entails the application of administrative sanctions under Legislative Decree n. 49 (14/03/2014).
• This device is powered by batteries subject to European Directive 2013/56/EU, which cannot be disposed of with normal domestic waste. Find out about the local regulations regarding the separate collection of batteries: correct disposal allows to avoid negative consequences for the environment and health

WARRANTY CONDITIONS
The product is covered by warranty according to current national and European regulations. For detailed warranty conditions and RMA requests please refer to our website: www.karmaitaliana.it.

• The warranty covers manufacturing defects and faults that occurred in the first 2 years from the date of purchase. In case of purchase with invoice, the warranty is limited to 1 year.
• Damages caused by negligence or wrong use of the device are not covered by warranty.
• The warranty is no longer effective if the item is modified or disassembled by not authorized people.
• This warranty doesn’t necessarily envisage the product’s replacement.
• External components, batteries, knobs, switches, and any removable or subject-to-wear-and-tear parts are excluded from the warranty.
• Shipment for the return of faulty items is at the expense and risk of the owner.
• The warranty is effective only upon the exhibition of the invoice or of the purchase receipt.
• If you send the product for repair, it must be shipped with complete original packaging: we therefore recommend saving it.

We also suggest registering your product on our website www.karmaitaliana.it, after signing in to access the reserved area. In this way, you will have the possibility to keep track of the warranty validity and to receive updates on our items.

DESCRIPTION

Front and back panel
(SET 8200 – SET 8200LAV)

Front and back panel
(SET 8202 – SET 8202LAV – SET 8202PL)

1. ON/OFF BUTTON
   To turn on/off the fixture.

2. VOL / VOL A
   Use it to adjust the volume of the wireless microphone (or of the first microphone on the SET 8202 series).

3. VOL B
   Use it to adjust the volume of the second microphone (only on the SET 8202 series).

4. DISPLAY
   It shows information on current functions.

5. ANTENNAS
   Point them upwards for best signal reception.

6. POWER SOCKET
   Connect the included power cable to this micro USB socket and on the other side to the USB adaptor. The cable can be also connected to the USB socket of a notebook or of a powerbank. For example: a deejay can power the receiver directly from his notebook and use the wireless microphones during his parties.

7. XLR SOCKET
   It’s the wireless microphone balanced output, which can be connected to mixers or amplifiers using a cable with XLR connectors.

8. 6,3 mm SOCKET
   It’s the wireless microphone’s unbalanced output, which can be connected to mixers or amplifiers using a cable with 6,3mm mono connectors. In the dual version (SET 8202 series) the mixed signal of the two transmitters will be available on this output.

SOME SUGGESTIONS

• Avoid using the wireless microphone near possible sources of radio interference such as transmitting antennas or high-voltage cables.
• Your new wireless microphone is endowed with several channels that can be changed to avoid local interference. Avoid anyway to use more than 3 receivers together, because they could interfere with each other. Our staff is at your disposal to give you suitable solutions if you need to use many microphones contemporarily.
• Always check the charge status of the transmitters’ batteries. A bad reception is often due to the batteries close to discharge.
• Avoid placing the microphone near speakers or loudspeakers as it could trigger annoying whistling (Larsen effects).
• If possible avoid using the wireless microphones in environments with thick walls between the transmitter and the receiver. In open space, wireless microphones can operate at considerable distances.
• In case of signal dropouts try to move the microphone even just a few centimetres.

Handheld Microphone

• Each microphone can operate only together with its receiver. The frequency of the receiver and the transmitter must be the same to work correctly.
• Press the (B) button to turn on the microphone. The display (A) will show the main information.
• To replace the batteries unscrew the (C) microphone’s cap.
• In case of interferences, you can try to change the transmission frequency, by choosing one of the 16 available. To do that remove the cover (C) by rotating it counterclockwise, then use the key (E). Each time you press this key, the frequency will also vary on the receiver base. For this reason in this stage, the receiver must be turned on.
• In the dual version, you can distinguish the microphones by the color of the bottom (D).

Bodypack with Headset

• Each microphone can operate only together with its receiver. The frequency of the receiver and the transmitter must be the same to work correctly.
• Press the (H) key to turn on the microphone. The display (I) will show the main information.
• To replace the batteries open the bodypack’s compartment (J).
• In case of interferences, you can try to change the transmission frequency, by choosing one of the 16 available. To do that open the cover (J) and use the small key inside the compartment. Each time you press this key, the frequency will also vary on the receiver base. For this reason in this stage, the receiver must be turned on.
• The headset is to be connected to the upper socket (G) which is a 3,5mm mono screw type.
• Take care to extend the antenna (F) for a better reception.

TECHNICAL SPECIFICATIONS

CH B: 663,10 –  678,10  MHz

1,5V batteries (not included)
Receiver’s dimensions| 175 x 40 x 120 mm| 175 x 40 x 120 mm
Weight| 1,2 kg| 1,3 kg

CONFIGURATION

• SET 8200
  • n°1 Receiver base WR 8200
  • n°1 Handheld wireless microphone MW 8200
• SET 8200LAV
  • n°1 Receiver base WR 8200
  • n°1 Bodypack MW 8201 with headset
• SET 8202
  • n°1 Receiver base WR 8202
  • n°2 Handheld wireless microphones MW 8200
• SET 8202LAV
  • n°1 Receiver base WR 8202
  • n°2 Bodypacks MW 8201 with headset
• SET 8202PL
  • n°1 Receiver base WR 8202
  • n°1 Handheld wireless microphone MW 8200
  • n°1 Bodypack MW 8201 with headset

INDEX

OTHER LANGUAGES

EU COMPLIANCE DECLARATION
Hereby, KARMA ITALIANA SRL declares that the radio equipment type Wireless Microphone SET 820X series complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.karmaitaliana.it.

Produced by:
KARMA ITALIANA SRL 21052, Busto Arsizio (VA) – Italy

www.karmaitaliana.it

Made in China

References

• KARMA ITALIANA Srl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>