ERMENRICH Seek VE20 Industrial Endoscope User Manual
- July 6, 2024
- ERMENRICH
Table of Contents
ERMENRICH Seek VE20 Industrial Endoscope
Camera Light
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the device only as specified in the user manual.
The kit includes: digital endoscope, USB Type-C charging cable, user manual, and warranty.
Install batteries
This device uses a rechargeable Li-ion battery. Connect the power cable to the
device and the 5V, 1A DC adapter for charging
(not included) via a USB plug and connect it to the AC power supply to charge
the battery. When using the device for the first time, charge it for at least
2.5 hours.
Usage
- Press and hold the Power button (3) for 3 seconds to turn the device on/off.
- Press the Camera light –/+ buttons (1/2) to adjust the camera light brightness.
- Put the probe into the area to be inspected. The camera view will be displayed on the screen.
Specifications
| Display | 2.8″ color TFT |
|---|---|
| Resolution | 1280x720px |
| Camera view angle | 70° |
| Camera diameter | 8.0mm |
| Detection range | 40–100mm |
| LEDs | 8pcs |
| Water-/dustproof certification | IP67 (only for lens) |
| Cable length | 10m |
| Operating temperature range | –10… +45°C / 14… 113°F (operating/storage) |
| Power supply | rechargeable Li-ion battery, 2600mA∙h; 5V, 1A DC adapter for |
charging (not included)
Battery life| 5 hours
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately.
Battery safety instructions
The device is equipped with a built-in rechargeable lithium-ion battery. This avoids frequent battery replacement. Always switch the device off when not in use. If the battery charge is low, please recharge the device in time to ensure that the measurements are accurate. Do not overheat the battery. Do not discharge the battery completely. Only use the original charger.
Ermenrich Warranty
Ermenrich products, except for their accessories, carry a 5-year warranty
against defects in materials and workmanship. All Ermenrich accessories are
warranted to be free of defects in materials and workmanship for six months
from the purchase date. The warranty entitles you to the free repair or
replacement of the Ermenrich product in any country where a Levenhuk office is
located if all the warranty conditions are met.
For further details, please visit: ermenrich.com If
warranty problems arise, or if you need assistance in using your product,
contact the local Levenhuk branch.