EVOLVEO ACSALMPIRP Alarmex Pro Wireless PIR Sensor with Immunity User Guide
- June 3, 2024
- Evolveo
Table of Contents
MANUAL
MODEL VERSION / DATE
ACSALMPIRP l. / 25. 3. 2022 
User Guide
ACSALMPIRP Alarmex Pro Wireless PIR Sensor with Immunity
EVOLVEO Alarmex Pro, wireless PIR sensor with immunity to small animal
movement
Thank you for choosing our product. Please read these instructions carefully
before use.
This product is only compatible with EVOLVEO Alarmex Pro, a smart wireless
WiFi/GSM alarm. Pair with the control panel according to the instructions in
the EVOLVEO Alarmex PRO user manual.
The detector uses advanced digital processing technology.
It has automatic temperature compensation function, low voltage warning,
intelligent energy saving, etc. Based on the detection of the human body’s
infrared heat energy, it sends a wireless signal that triggers a host alarm.
Its advantages are low environmental impact, low number of false alarms, easy
installation, reliable and safe use, etc.
Installation description
Pair the detector according to the instructions in the EVOLVEO Alarmex Pro
manual.
Switch the power switch on the back of the device to the “ON” position. The
LED lights up when infrared radiation from the human body is detected and a
wireless signal is sent to activate the device.
Warning:
– The recommended installation height is 1.8~2 meters above the ground, the
detection distance is ≤8m, the transmission distance is ≤80 meters (without
obstacles).
Test the distance before installation.
– We do not recommend installation directly against mirrors, doors and
windows.
– We do not recommend installation near sources of cold and heat.
– Do not install detectors in areas with constant airflow that could cause a
false alarm. For example, a moving curtain due to a draught.
Detector switches
The sensitivity of the detector can be switched using a combination of
switches located on the detector.
A-ON + B-ON – High sensitivity
A-OFF + B-ON – Medium sensitivity
A-ON + B-OFF – Low sensitivity
Toggle the “Notification” switch to turn off/on sending notifications.
Use the “LED” switch to switch the LED flashing off/on.
Technical parameters
| Model | ACSALMPIRP |
|---|---|
| Working voltage | 9V (250mAH) |
| Standby current | 540uA |
| Current on activation | 515mA |
| Working temperature | -10-50°C |
| Detection zone | 58m / 110° |
| Low battery warning | 2V (LED flashes rapidly) |
| Wireless connection parameters | 433MHz |
| Relative humidity | 585% |
| Dimensions | 105 58 37 mm |
Warranty and post-warranty service
Repairs and servicing can only be carried out at an authorized service point
for EVOLVEO products (more at www.evolveo.com),
otherwise you may damage your mobile phone and lose your warranty.
Disposal: The crossed-out container symbol on the product, in the
accompanying documentation or on the packaging means that in EU countries, all
electrical and electronic equipment, batteries and accumulators must be
disposed of separately at the end of their useful life as separated waste. Do
not dispose of these products in unsorted municipal waste.
ECLARATION OF CONFORMITY
The company Abacus Electric, s.r.o. hereby declares that the EVOLVEO
ACSALMPIRP telephone meets the requirements of the standards and regulations
that are relevant for the given type of equipment.
The full text of the Declaration of Conformity can be found at
http://ftp.evolveo.com/ce/
Importer
Abacus Electric, s.r.o.
Planá 2, 370 01, Czech Republic
Producer / Producer / Manufacturer / Gyártó
Naxya Limited
No. 5, 17/F, Strand 50, 50 Bonham Strand, Sheung Wan,
Hong Kong
Made in China
Copyright © Abacus Electric, s.r.o.
www.evolveo.com
www.facebook.com/EvolveoCZ
All rights reserved.The appearance and technical specifications of the product
are subject to change without notice.