Guide F640 Fire Special Thermal Camera User Manual

Guide F640 Fire Special Thermal Camera

Product Information

The Fire special thermal camera is a high-quality thermal imaging device designed for various applications. It allows users to capture thermal images and detect heat signatures in real-time. The camera is equipped with advanced technology to provide accurate temperature measurements and reliable performance. Please note that the specific model of the product you receive may differ from the images in this manual. Refer to the physical receipt for the exact specifications of your product.

Product Usage Instructions

1. Before using the camera, carefully read and store this manual for future reference.
2. Ensure that the battery is charged correctly by following the provided charging steps and precautions. Incorrect charging can lead to battery heating, damage, or personal injury.
3. Do not attempt to open or disassemble the battery. In case of battery leakage and liquid entering the eyes, immediately flush the eyes with water and seek necessary medical care.
4. When using the camera, keep it stable and avoid violent shaking to ensure accurate readings and clear images.
5. Ensure that the camera is used and stored within the permitted operating temperature range. Using or storing the device outside the recommended temperature range may affect its performance.
6. Avoid directing the camera towards high-intensity thermal radiation sources such as the sun, lasers, spot welders, etc. Thiscan damage the camera and affect its functionality.

For any further assistance or technical support, consult the dealer or an experienced radio/TV technician.

Disclaimer: This manual provides general information and instructions. Please refer to specific guidelines provided by the manufacturer for detailed usage instructions and safety precautions.

Thank you for purchasing this product, please read this manual before use, after reading, please carefully store for future reference. We hope this product will meet your expectations.

IMPORTANT
This manual is a general manual for a series of products, which means that the specific model of the product you receive may be different from the manual picture, please refer to the physical receipt.
his user manual is organized for the convenience of users to use and understand the company’s products, we will do our best to ensure the accuracy of the content of this manual, but still cannot guarantee the completeness of the content of this manual, because our products have been continuously updated and upgraded, the company reserves the right to modify at any time without prior notice。

FCC WARNING

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct t he interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF Exposure requirement. The device can be used in Portable Exposure condition without restriction.

CONSIDERATIONS

Danger

• Charge the battery as instructed in the Guide and follow the charge steps and precautions. Incorrect charging can cause heating or damage of the battery or even cause personal injury;
• Never attempt to open or disassemble the battery; if the battery   leaks and the liquid enters eyes, immediately flush the eyes  with water and then take necessary medical care.

WARNING

1. When using the equipment, please try to keep it stable and avoid violent shaking.

2. Do not use or store the instrument in an environment beyond the permitted operating temperature or storage temperature of the equipment.

3. Do not direct the equipment at high intensity thermal radiation sources, such as the sun, lasers, spot welders, etc.

4. Do not plug the hole in the device.

5. Do not knock, throw or vibrate instruments and accessories to avoid damage.

6. Do not disassemble the machine by yourself, which may cause damage to the equipment and loss of warranty rights.
   Do not use dissolved or similar liquids on equipment or cables, which may cause damage to the equipment.

7. Please do not use the equipment in an environment that exceeds the operating temperature of the equipment, which may cause damage to the equipment.

8. Please follow the following measures when wiping the equipment：
   Non-optical surface: When necessary, you can use a clean and soft cloth to wipe the non-optical surface of the thermal camera.
   Optical surface: Please avoid staining the optical surface of the lens when using the thermal camera, especially avoid touching the lens with your hands, because the sweat on your hands will leave traces on the lens glass and may corrode the optical coating layer on the glass surface. When the surface of the optical lens is contaminated, use professional lens paper to carefully wipe.

9. Do not place the battery in a high temperature environment or near high temperature objects.

10. Do not short-circuit the positive and negative terminals of the battery.

11. Do not place the battery in a humid environment or water.

CAUTION

• Do not expose the equipment to dust or damp environment. When used in an environment with water, water should be avoided on the instrument. Cover thelens when not in use.
• When the equipment is not in use, please place the instrument and all accessories in a special packaging box.

Storage and Transportation

Storage:
A packaged product shall be stored in a well-ventilated and clean environment with a temperature range of -40° C to 85° C, a relative humidity not exceeding 95%, and free of condensate and corrosive gas.

Transportation：
During transportation and circulation, the product shall be protected from rain and water and placed flatwise. It shall be protected from violent vibration and impact. During handling, it shall be handled with care and cannot be tossed.

Product Introduction

This product is specially designed for fire protection infrared thermal imager, mainly used for fire fighting and rescue, fire inspection, rescue and disaster relief operations. It can guide firefighters to rescue personnel under harsh smoke and high temperature fire site conditions, find the fire source, prevent firefighters from straying into high temperature dangerous areas, and ensure the property and life safety of the masses. This product is usually handheld, both detection type and rescue type. Use battery power, with infrared image display, temperature indication, temperature analysis, picture or video playback and other functions.

Introduction to Product Parts

1. The power /OK button
2. Menu/Left button
3. HDMI
4. Clear/right-click
5. Trigger key
6. Type-C

Operation steps

1. Place the battery in the battery compartment.
2. Hold down the power switch for 2 second。
3. Set the language (for first use).
4. Enter the real-time preview and point the thermal camera at the target.
5. Select the photo or video mode and press the photo button to save the image or recorded video.
6. Press the button to perform other operations.

Interface description

1. Sensitivity mode: Low sensitivity temperature measurement range（0℃~650℃，500℃~1200℃，1000~2000℃）， High sensitivity temperature range（-20℃~150℃)；
2. Data transmission status: status display when connecting PC and HDMI for data transmission；
3. Electronic magnification: In the menu bar, select and press the OK key to display the current magnification status, including: 2X, 4X, 8X；
4. Data recording status: Displays the status of the photo or video recording mode；
5. PLUS image mode: In non-basic fire mode, the “plus” icon is displayed on the left side of the image mode；
6. Image mode: Display different image mode states, mainly including 6: basic fire, black and white, fire, search and rescue, heat detection, standard；
7. Internal electronic overheat flashing indicator: visual warning indicates that overheat and stop working, red flashing 1min after shutdown；
8. Temperature alarm: When the high temperature and low temperature alarm is triggered, the icon flashes until the alarm is over；
9. Battery status: divided into green, yellow, red display, low power flashing；
10. Digital temperature indicator: Open the center point in the analysis menu and display the temperature of the center point；
11. Temperature bar: Dynamic vertical propulsion according to the temperature change of the current center point；
12. Color strip: changes with the temperature measurement area, and has a temperature scale；

Considerations

1. Avoid direct sunlight on the object to be observed.。
2. Do not directly expose the device to high-intensity thermal radiation sources, such as the sun, lasers and spot welders.。
3. During the observation, make sure the target is clear; otherwise, you may get wrong measurement results.。
4. Proper analysis of IR images requires technical knowledge of the application.

Guide for Common Faults and Troubleshooting

after recharging
Bad contact of the battery| Remove the battery, put it back in the battery compartment and install it in place
The external power supply is not plugged in properly| Unplug the power plug, plug it back in and push it into place
The displayed battery power| Battery dead| Replace       a       fully charged battery
differs greatly from the actual usage| Battery life is up| Replace the battery
Image is not clear| The       lens     is dehydrated         or contaminated| Use                  professional equipment to clean the lens
Inaccurate temperature measurement| Parameters related  to temperature measurement are incorrectly set| Change parameter Settings, or restore default parameter values
| Non-uniformity correction was not performed for a long time| In the expert menu, press the shutter once in the temperature measurement and
| | debugging interface, hear the shutter sound, and perform a non-uniformity correction
| Power on immediately measure the temperature| In order to ensure the accuracy of temperature measurement, we recommend that you turn on the thermal camera and wait 5-10 minutes to start the temperature measurement
| No calibration for| For accurate
| a long time| temperature measurements, we recommend that you send the camera back for calibration once year
File cannot be stored| File cannot be stored| Delete pictures and video files from your gallery
| The internal memory card is abnormal. Procedure| Shut down and restart the storage card. Format the storage card on the device or replace it with a new storage card

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>