Kenmore 437.85777 Cleanable Hepa Type Air Cleaner User Guide

July 5, 2024
Kenmore

Kenmore 437.85777 Cleanable Hepa Type Air Cleaner

Specifications

  • Model: Kenmore 152.85777
  • Type: Cleanable HEPA-Type Air Cleaner
  • Manufacturer : Sears, Roebuck and Co.
  • Filter Type: Cleanable HEPA-Type Filter
  • Power Requirement: 120-volt AC

Product Usage Instructions

Introduction

Congratulations on choosing the Kenmore Cleanable HEPA-Type Air Cleaner. This air cleaner utilizes a three-stage cleaning system to reduce common indoor pollutants effectively.

Setup

  1. Inspect the air cleaner upon removal from the box for any damage or mishandling.
  2. Plug the air cleaner into a properly grounded 3-prong household AC outlet.

Operating Recommendations

  • For maximum performance, it is recommended to operate the air cleaner as follows:
  • Run the air cleaner continuously for 24 hours a day on Ionize Off mode for the first day.
  • After the first day, switch to Ionize On mode for regular operation.
  • Use Ionize Off mode when quick cleaning and extra refreshing of room air is needed.

Safety Precautions

  • Read and follow all safety and operating instructions before using the product.
  • Only plug the air cleaner into a properly grounded 3-prong, 120-volt AC outlet to avoid the risk of electric shock.

FAQ

  • Q : How do I order replacement filters for the Kenmore 152.85777 Air Cleaner?
  • A : You can order replacement filters by phone, call toll-free 1-800-366-7278, available 7 AM to 7 PM seven days a week.
  • Q : What is the warranty coverage for the Kenmore 152.85777 Air Cleaner?
  • A: The product comes with a one-year full warranty against defects in material or workmanship. Refer to the warranty details provided in the manual for more information.

IMPORTANT SAFETY INSTRUCTIONS

Please read all instructions before using this product. Save these instructions for easy reference. When using electrical appliances basic precautions should always be followed to reduce breakage, risk of fire, electric shock and injury to persons including the following:

  • Read all instructions before operating the air cleaner.
  • Place the air cleaner where it is not easily knocked over by persons in the household.
  • ALWAYS unplug air cleaner when not in use.
  • DO NOT use any product with a damaged cord or plug, or if the product malfunctions, is dropped or damaged in any manner.
  • Keep the power cord away from heated surfaces.
  • DO NOT use air cleaner outdoors.
  • NEVER use the air cleaner unless it is fully assembled.
  • DO NOT run power cord under carpets and DO NOT cover with throw rugs. Arrange the cord so it will not be tripped over.
  • DO NOT use air cleaner where combustible gases or vapours are present.
  • DO NOT expose the air cleaner to rain, or use near water, in a bathroom, laundry area or other damp locations.
  • To disconnect air cleaner, first press the Power Button to turn air cleaner OFF and remove the plug from outlet.
  • DO NOT allow foreign objects to enter ventilation or exhaust openings, as this may cause electric shock or damage to the air cleaner.
  • Place air cleaner near a power outlet and avoid using an extension cord.
  • DO NOT block air outlets or intakes.
  • To reduce the risk of electrical shock, this equipment has a grounding-type plug that has a third (grounding) pin. This plug will only fit into a grounding-type power outlet. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet. Do not alter the plug in any way.
  • The air cleaner has a 3-prong (grounded) plug for safe operation. The 3- 3-prong plug should be plugged directly into a properly grounded 3-prong electrical outlet. DO NOT, FOR ANY REASON WHATSOEVER, CUT OR REMOVE THE GROUNDING PRONG FROM THE PLUG. Removing the grounding plug may result in electrical shock or create unsafe conditions. Contact a qualified electrician to be sure the outlet is properly grounded.
  • A loose fit between the plug and the AC outlet (receptacle) may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn receptacles.
  • DO NOT sit, stand on, or place heavy objects on the air cleaner.
  • ALWAYS disconnect power supply before servicing.

WARNING! To reduce the risk of fire or electric shock, DO NOT use this product with any solid-state speed control device.

WARRANTY

KENMORE ONE YEAR FULL WARRANTY

  • If this Kenmore product fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears store or other Kenmore outlet in the United States for free replacement.
  • This warranty applies for only 90 days from the date of purchase if this product is ever used for other than private household purposes.
  • This warranty does not include the pre-filter, which is an expendable part.
  • This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
  • Sears, Roebuck and Co., Hoffman Estates, IL 60179

INTRODUCTION

  • Congratulations on your choice of the Kenmore Cleanable HEPA- Type Air Cleaner. Your new air cleaner quickly and effectively cleans and revitalizes indoor air by utilizing a three stage cleaning system to reduce the amount of commonly found pollutants such as tobacco smoke, pollen, household dust, pet dander, and even mould spores.  Designed for outstanding owner convenience, this air cleaner features  a cleanable HEPA- Type filter, which eliminates the need to replace and purchase expensive filters. It also has a filter clean indicator that takes the guesswork out of knowing when to clean the filter. Three cleaning levels and programmable timer functions let you match the air cleaner’s performance to your special needs. All operating functions are easily set and adjusted with convenient push button electronic controls and LED light display.
    • For maximum performance, we highly recommend that you operate the Cleanable HEPA-Type Air Cleaner in the following manner:
    • 24 hours a day
    • Ionizer ON for the first day.
    • Ionizer OFF after the first day.
    • Ionizer ON when you require quick cleaning and extra refreshing of room air.

SETUP
Your Cleanable HEPA- Type Air Cleaner was thoroughly inspected and tested at the factory prior to packaging. Visually inspect it upon removal from its box. Remove and discard any packaging material. Return the unit if it shows any signs of damage or mishandling.
ELECTRICAL HOOKUP
Plug the Cleanable HEPA- Type Air Cleaner into a properly grounded, 3-prong household AC outlet. If you are not sure whether the outlet is properly grounded, have it checked out by a qualified electrician.

WARNING! To avoid the risk of electric shock hazard, the Cleanable HEPA- Type Air Cleaner should ONLY be plugged into a properly grounded 3-prong, 120-volt AC outlet.
CAUTION: NEVER operate the Cleanable HEPA- Type Air Cleaner until it is completely and fully assembled. Permanent damage could result to the motors and controls.

HOW IT WORKS

  • This Air Cleaner is equipped with a three-stage cleaning system that utilizes a charcoal pre-filter, Cleanable HEPA (High Efficiency Particulate Arrestor)­Type Filter and ionizer. Room air is drawn into the air cleaner through the air intake grille and passes through the filters:
  • The charcoal pre-filter attracts larger and odour-producing particles and prevents them from passing into the Cleanable HEPA-type filter.
  • Finer particles not trapped by the charcoal pre-filter are captured by the Cleanable HEPA-Type filter.
  • The filtered air is then released from the front of the unit and dispersed outward into the room. The Ionizer, when turned ON, adds negative ions to the exiting stream of clean air. This function provides additional air freshening and revitalization (See Fig. 1 ).

OPERATION

POWER ON/OFF TO START AIR CLEANER (SEE Fig. 2E)

  • Press the Power Button.
  • The control buttons and LED lights will light up.
  • The air cleaner starts at Low speed with the Ionizer ON and the Timer OFF. There will be a short beep anytime a control button is pressed.

TO SET SPEED (SEE Fig. 2G)

  1. The air cleaner is at a LOW speed.
  2. For MEDIUM speed, press the button.
  3. For HIGH speed, press the button again.
  4. For LOW speed, press the button again.

SPEEDS

  • HID Maximum Operation ……………. Fast Cleaning
  • MED aytime Operation ………………. Normal Cleaning
  • LO Nighttime Operation …………….. Quieter Cleaning

Each time you start your Air Cleaner, we recommend that you run it at HI speed for a few minutes for fast initial cleaning. Then set it to MED or LO as desired. The ionizer, when turned ON, adds negative ions to the exiting stream of clean air. This function provides additional air freshening and revitalization.

TO TURN IONIZER ON/OFF (See Fig. 2F)

  • The ionizer is on when the air cleaner is turned ON.
  • The LED light above the ION button will light up.
  • To turn the Ionizer OFF, press the button.
  • To turn the Ionizer back ON, press the button again

TO SET TIMER BUTTON (See Fig. 2D)

  • Your air cleaner has a timer function that allows you to select from three
  • pre-programmed periods of operation (one, two or four hours) for which you would like the air cleaner to run and then shut itself off automatically.
  • Press the Timer button once and the air cleaner will run for one hour. The LED light will light up below 1 H indicating it has been programmed to run for one hour.
  • Press the Timer button again and the air cleaner will run for two hours. The LED light will light up below 2H indicating it has been programmed to run for two hours.
  • Press the Timer button again and the air cleaner will run for four hours. The LED light will light up below 4H indicating it has been programmed to run for four hours.
  • Press the Timer button again to turn OFF the timer operation.

MAINTENANCE

CLEANABLE HEPA-TYPE Fil TER CLEAN/ PRE-FILTER CHANGE SCHEDULE

  • Your air cleaner also has built-in reminders to let you know when to change the charcoal pre-filter and when to clean the HEPA-type filter.
  • The charcoal pre-filter will need to be replaced and the HEPA-type filter will need to be cleaned periodically in order to allow the air cleaner to operate at peak efficiency. The frequency of charcoal pre-filter replacement and HEPA­Type filter cleaning will
  • depend on the environment in which the air cleaner is used. LED lights on the control panel will alert the user when to change the charcoal pre-filter and clean the HEPA-type filter.
  • After running for approximately 14 weeks, 24 hours a day, the LED light below the Clean HEPA- Type filter will light up and a short beep will follow reminding you the HEPA- Type filter should be cleaned.
  • After running for approximately 8 weeks, 24 hours a day, the LED light below Change Pre-filter will light up and a short beep will follow reminding you the charcoal pre-filter should be replaced.
  • Please note that these pre-set cleaning and changing schedules are based on factory-recommended times under normal use. The HEPA-type filter may need to be cleaned or the charcoal pre-filter may need to be replaced earlier depending on the
  • environment. You should occasionally give the pre-filter a visual check.

CLEANING AND RE-INSTALLING HEPA-TYPE FILTER

When the Clean HEPA-Type Filter Indicator Light (See Fig. 2A) lights up, it is time to clean the HEPA- Type filter.

  1. Turn the air cleaner OFF and unplug it from the power outlet.

  2. Carefully lay the unit down on a flat surface with the intake grille (rear of the air cleaner) facing up. See Fig. 3

  3. Gently pull the release tabs on each side of the intake grille up for removal.

  4. Remove HEPA the type filter from air cleaner and place it on a flat surface.

  5. Clean the HEPA-type filter by vacuuming entire surface area of the filter using a soft brush attachment from an upright or canister household vacuum.
    NOTE: THIS FILTER IS NOTWASHABLE. USING UQUIDSTO CLEAN HEPA-Type FILTER Will DESTROY IT.

  6. Place HEPA- Type filter back into air cleaner. Make sure the pleated side of the filter is facing up.

  7. Place the intake grille back into the air cleaner so that the bottom tabs engage into the slots at the base of the unit

  8. Gently push the intake grille forward until it snaps in place.

  9. Plug the air cleaner back into a properly grounded 3-prong outlet.

  10. Press the power button ON

  11. Press and hold the Filter Change/Clean Reset button (see Fig. 2C) for up to 1 0 seconds to reset it.

REPLACING THE PRE-Fil TEA
When the Change Pre-Filter Indicator Light (See Fig. 2B) lights up, it is time to replace the charcoal pre-filter.

  1. Turn the air cleaner OFF and unplug it from the power outlet.
  2. Carefully lay the unit down on a flat surface with the intake grille (rear of the air cleaner) facing up. (See Fig. 3.)
  3. Gently pull the release tabs on each side of the intake grille up for removal.
  4. Turn the intake grille around and place it on a flat surface so that the entire surface of the pre­filter is visible.
  5. Pre-filter is attached to four adhesive pads on the interior of the intake grille. Detach the pre-filter and discard it. (See Fig. 4.)
  6. Wipe off the outside and inside of the intake grille with a soft, damp cloth to remove any visible dust.
  7. Remove and discard any plastic protective wrapping from the new pre­filter.
  8. With the adhesive pads visible, lay the pre-filter inside intake grille and gently push down to attach.
  9. Place intake grille back into air cleaner so that the bottom tabs engage into the slots at the base of the unit.
  10. Gently push the intake grille forward until it snaps in place.
  11. Plug the air cleaner back into a properly grounded 3-prong outlet.
  12. Press the power button ON.
  13. Press and hold the Filter Change/Clean Reset button (see Fig. 2C) for up to 1 0 seconds to reset it.

CLEANING GRILLE AND CABINET

WARNING: To avoid serious injury from electric shock ALWAYS turn the air cleaner OFF and disconnect the plug from the outlet BEFORE cleaning.

  1. Turn the Air Cleaner OFF and unplug it from the outlet.
  2. Use a soft damp, cloth to gently wipe dirt away from external surfaces. DO NOT pour or splash water on the unit or use abrasive cleaners.
    NOTE: DO NOT attempt to clean the pre-filter or HEPA- Type filter with liquids. They ARE NOT washable. Any attempts to wash them will damage the filters.\

STORAGE

Turn OFF the air cleaner by pressing the Power button. Then unplug the unit from the electrical outlet.

  1. Remove charcoal pre-filter. Store in an airtight plastic bag to ensure optimal future performance.
  2. Clean and re-install the HEPA-Type filter.
  3. Cover the air cleaner and store in a suitable clean and dry environment.

To restore the Air Cleaner back to service:

  1. Unwrap the air cleaner.
  2. Replace the pre-filter as directed in Replacing the Pre-filter.

TECHNICAL SPECIFICATIONS

  • Length:10-4/s in. (26.5cm)
  • Width:7-7/s in. (19.8cm)
  • Height:25-3 /s in. (64.5cm)
  • Weight:12.57 lbs.(5.7kg)
  • Input Voltage:120 Volts AC, 60 Hz

R REPLACEMENT PARTS

  • Pre-Filter; 85778

Cleanable HEPA- Type Filter:85779

CUSTOMER A RESISTANCE LIN E

If you experience a problem, please see the warranty for information. Do NOT attempt to repair this unit yourself. Doing so will void the warranty, and could cause serious personal injury to yourself, or damage the air cleaner. If you have any questions concerning this appliance please call toll-free: 1-888-277-2810. Monday – Friday 8:30 AM to 5:00 PM Central Standard T ime

H OW TO ORDER R REPLACEMENT PARTS

To order replacement parts call toll-free 1-800-366-7278. 7 AM – 7 PM Seven days a week.

Your Home
For expert troubleshooting and home solutions advice:

manage  my home

www.managemyhome.com
For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances and items like garage door openers and water heaters.

contact

Our Home
For repair of carry-in items like vacuums, lawn equipment, and electronics, call anytime for the location of your nearest Sears Parts & Repair Service Center

To purchase a protection agreement on a product serviced by Sears:

  • 1-800-827-6655 (U.S.A.)
  • Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas:
  • 1-888-SU-HOGAR®
  • (1-888-784-6427)

1-800-361-6665 (Canada)

® Registered Trademark/ TM Trademark/ sM Service Mark of Sears Brands, LLC
® Marca Regilotr1,1d1,1 / lW Marca de FB:brica I SM Marca de Servido de Sears Brands, LLC Mc Merque de commerce/ wo Marque dt’tpo&t’te de Sears Brands, LLC

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Kenmore User Manuals

Related Manuals