GOLDEN 1925380X AirBass Signature True Wireless Earbuds User Manual
- July 4, 2024
- GOLDEN
Table of Contents
GOLDEN 1925380X AirBass Signature True Wireless Earbuds
Product Specifications
- Charging Case: Micro Type-C charging cable
- Earbuds Charging : LED indicators (Red when charging, Red off when fully charged)
- Auto Power – off: Earbuds turn off after 5 minutes of no connection
- Bluetooth Pairing: PAIRING NUMBER
- Button Functions: Music mode and Call mode
Product Usage Instructions
Charging the Charging Case:
Use the supplied micro Type-C charging cable to connect the charging box.
The charging box will turn ON automatically and will be charged. During
charging, the LED indicators will be red and keep flashing. When the charging
box is completely charged, the LED indicators will stay red.
Charging the Earbuds:
Place the earbuds in the charging box. The charging box will automatically
turn on and begin to charge the earbuds. During charging, the LED indicators
on the earbuds will be RED. When the earbuds are completely charged, the RED
LED will turn off.
Using the Earbuds:
Take out the earbuds from the charging box, and they will be turned on
automatically. Place the left and right earbuds correctly into your ear.
Connecting to Bluetooth Device:
You need to pair the PAIRING NUMBER with your mobile phone before using it.
Make sure that the earbuds are turned ON. Let your phone search for devices
and select PAIRING NUMBER from the list.
HOW TO CHARGE
HOW TO CHARGE THE CHARGING CASE
Use the supplied micro Type-C charging cable to connect the charging box. The
charging box will turn ON automatically and will be charged.
- During charging the LED indicators will be red and keep flash.
- When the charging boxes are completely charged, the LED indicators will keep red.
HOW TO CHARGE THE EARBUDS
Place the earbuds in the charging box. The charging box wil automatically turn
on and begin to charge the earbuds.
- During charging the LED indicators on the earbuds will be RED
- When the earbuds are completely charged, the RED LED will turn off.
ATTENTION!
The earbuds will turn off automatically if there has been no connection with
your mobile phone for 5 minutes.
USE OF THE EARBUDS
Take out the earbuds from the charging box, the earbuds will be turned on automatically. Place the left and right earbuds correctly into your ear.
HOW TO CONNECT THE BLUETOOTH DEVICE
You are required to pair the PAIRING NUMBER with your mobile phone once before
using it. Make sure that the earbuds are turned ON. Let your phone search for
devices and select PAIRING NUMBER from the list.
THE FUNCTION OF THE BUTTONS
Music mode
Left button
- Short press once(1 second): Pause/play music
- Press 2 times: Decrease the volume
- Press 3 times: Voice Assistant
- Long press 2 seconds: Switch to the previous song(after switching to the previous song, continue to long press to turn off)
Right button
- Short press once(1 second): Pause/play music
- Press 2 times: Increase the volume
- Press 3 times: Redial the last call
- Long press 2 seconds : Switch to the next song (after switching to the previous song, continue to long press to turn off)
CALL MODE
- Short press once(1 second): answer/end call
- Long press 2 seconds: Reject the incoming cal
FCC
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user.
CAUTION: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body.
Frequently Asked Questions
- Q: How do I know if the earbuds are fully charged?
- A: The RED LED on the earbuds will turn off when they are completely charged.
- Q: How can I pair the earbuds with my mobile phone?
- A: Make sure the earbuds are turned ON, then let your phone search for devices and select the PAIRING NUMBER from the list.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>