Malide MLD-B01 TPMS Bluetooth Car Wireless Sensors User Manual

Malide MLD-B01 TPMS Bluetooth Car Wireless Sensors

TPMS Introduction

The principle of the TPMS is to use wireless sensors installed on the tires to measure the tire pressure and temperature, and wirelessly send the information to the central receiving system for display. When the tire pressure or temperature is abnormal, the system will give an alarm to remind the owner. The owner can set the alarm threshold according to the actual situation.

Significance

• Know the tire status in real time, which greatly guarantees travel safety；
• Avoid puncture accidents；
• Reduce tire wear；
• Reduce car fuel consumption；
• Avoid damage to the wheel hub。

Precautions

• Please use this product correctly and use it within the allowable range.The scope of its use, the company will not be responsible for all consequences；
• This “User’s Manual” contains instructions for internal and external TPMS, please install according to the type of product purchased；
• If the tire temperature and pressure are abnormal, please drive the vehicle to a nearby repair shopfor inspection and maintenance in time to avoid accidents；
• The external sensor can replace the battery, please read the manual carefully before operating; the battery of the built-in sensor is not removable, please do not disassemble.

Parts List

Sensor Description

APP Description

APP Download Method

Method 1 Scan the QR code.
Method 2 Search “Malide TPMS” in the App store.

APP Binding Description

1. Open the APP and click ” ” to enter the setting interface；

2. Click “Bind New Device”；

3. Manual Matching:Enter sensor ID；
   QR Matching:Scan the sensor QR ID；

4. Bind successfully.

Note When receiving data, the phone needs to turn on Bluetooth.

External Sensor Installation Instructions

External Sensor Installation Steps(B01/B08)

• After installation, water can be sprayed on the valve to check whether it is installed in place.
• For MLD-B08, step 2 and 4 are not required.

Steps of Replace The Battery

Internal Sensor Installation Instructions

Internal Sensor Installation Steps(B05)

Voice Broadcaster Installation （Optional）

Instructions:
Insert the voice broadcaster into the car charger port.

Note

1. The voice broadcaster has been paired
2. If you change the sensor or modify the TPMS parameters, you need to re-bind the voice broadcaster.

Principle Explanation

TPMS Alarm Description

Exceed the safe pressure range or Leakage

APP : Tire pressure data and the sign will turn red and the App will alert.
Broadcaster : Red warning light will flash red and the broadcaster will alert.

The default tire pressure safety range is 1.9～2.8Bar.

Exceed the safe temperature range
APP: Tire temperature data and the sign will turn red and the App will alert.
Broadcaster : Red warning light will flash red and the broadcaster will alert.

NOTE The default tire temperature safety range is ≤65℃.

Sensor low battery
APP : The battery sign will turn red and the App will alert.
Broadcaster : Red warning light will flash red and the broadcaster will alert.

When the sensor battery is low , please replace the battery of the external sensor or the internal sensor in time.

Alarm Threshold Setting

App alarm threshold setting

1. Open the APP and click ” ” to enter the setting interface；
2. Click the “System Parameter Setting”；
3. Set the threshold。

Please read this manual carefully and operate according to the actual situation of the vehicle.

Broadcaster alarm threshold setting(Optional)

4、Follow the step1,step 2, and step 3 to set the APP alarm threshold；
5、Click “Supporting Device Binding” on the setting interface, and then click “Search Device”；
6、press the button of the broadcaster until the light flashes red and blue；
7、Click “MLD_R06” displayed on the App(As shown in Figure 2)。

Product Parameter

Product Model| MLD – B01| MLD – B08| MLD – B05| MLD – R06
---|---|---|---|---
Product Type| Sensor| Recevier
Installation| External| Internal| 5V USB
Frequency| 2.4GHz
Working Voltage| DC 2.4-3.3V| DC 5V
Sleeping Current| ≤2.5μA| ≤2.4μA| ≤2.4μA| /
Working Current| ≤50μA| ≤55μA| ≤55μA| ≤9500μA
T Working emperature| -40～85℃| -40～125℃
Monitoring Range of Pressure| 0～640 Kpa
Monitoring Range of Temperature| 0～85℃| 0～99℃

Problem Solution

• After binding the ID, the APP does not display data.
  Turn on the Bluetooth and APP of your phone, and you can receive data after driving.

• There is no signal data even after driving。
  Restart the App and Bluetooth, the driving speed needs to reach 20Km/h or more,And keep it for about 20 seconds.

• The APP data is not updated.
  When you are driving, you need to open the APP and Bluetooth, the APP will update the data after receiving the signal of sensor.

• The voice”Tire pressure and temperature are normal, have a nice trip!” .
  The voice announcer and APP receive the latest tire temperature and pressure data every time the sensor wakes up when driving.If the data is within the set normal range, the user will be prompted with a voice prompt that the tire condition is normal。

• Disposal of waste products。
  After replacing the battery or sensor, please dispose of it through legal recycling channels.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

References

• 深圳市马力德科技有限公司-深圳市马力德科技有限公司

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>