MONSTER MNSOLX-BK Solar X Outdoor Wireless Powered Speaker User Guide

Quick Start Guide
For complete operational guidelines please refer to your user manual.

BASIC SET UP

Connect Power & Charge

1. Please connect the USB-type C cable for Power.
2. Plug the USB-type-c cable with a Plug ( not included) into a wall outlet.
3. Press the Power button (ON)
4. Monster SolarX will enter Bluetooth Pairing mode automatically.
5. Pair with your Bluetooth device.
   BEFORE FIRST USE: Charge the unit for 6 hours.
   When fully charged, the red light is solid.
   When Low battery ,the red light is quick flashing.
   When the battery is charging, the red light is blinking
   NOTE: Charger is not included

Manual Bluetooth Pairing

1. Set the speaker source to Bluetooth (unpaired).
   Blue LED will flash.

2.  Make sure the Bluetooth function is enabled on your device.

3.  Place the Bluetooth device and speaker within pairing distance (~1 meter).

4.  Press and hold the Bluetooth button for 3 seconds to enter pairing mode (BLUE LED will flash fast).

5.  Search for Bluetooth connections on your device. Select “Monster SolarX”

6.  The speaker will confirm connection with an audible message (BLUE LED will turn solid).

LED Light Panel

CHANGING COLORS

• Short Press the Color/Battery Indicator button to cycle through the preset colors: Red, Green, Blue, Yellow, Purple, Cyan, White, Chrome
• Press and Hold the Light/Timer key to enable or disable the timer function.
• The default timer is 2 hours, and you can switch to 4 hours, 6 hours, 8 hours through the APP.

NOTE: When light is OFF, press the key to turn light ON

EZ-PLAY TECHNOLOGY

How to pair several speakers (EZ Play 2)

Step 1
Long press the “Power” key for 2 seconds to power on Master Speaker (Speaker A), Speaker A works at BT pairing mode and BT Blue LED fast flashes if nothing has been paired with, Speaker A auto reconnects to last connected mobile device if it has been paired with.

Step 2
Open the Bluetooth section of the device (e.g, mobile phone), search and connect the Monster SolarX
Step 3
Press “ ” key once on the Master Speaker (Speaker A), it enters into EZ Play 2 mode, the White LED lights solid and the speaker will say “Tone”

Step 4
Long press the “Power” key for 2 seconds to power on receiver Speaker (Speaker B), After the “  ” key is pressed, the orange indicator of the B speaker blinks. When the connection is successful, the orange indicator is solid and the speaker will say “Connected ”  (Speaker B) receives the signal from (Speaker A) and plays the same sound as (Speaker A)
Step 5
All (Speaker B,C,D,E…) and other receiver Speaker(s) can enter the EZ Play 2 listening mode of the receiver unit by performing steps 4 above, and play the audio from the main unit.

Remarks:

1. Speakers B,C,D,E… need to be working in Bluetooth paring mode; if Speakers B,C,D,E… are not in working Bluetooth connecting mode, press and hold “BT” key for 3 seconds to enter pairing mode.
2. Adjust the Volume control on the master speaker, in the same group speakers will sync the volume changing, If you adjust the volume on any receiver speaker, you only change the volume in that speaker.

… and follow the instructions in the app.

http://mymonsteraudio.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>