nedis LTLGQ4M2xx Desktop LED Lamp with Wireless Charger User Guide
- June 1, 2024
- nedis
Table of Contents
nedis LTLGQ4M2xx Desktop LED Lamp with Wireless Charger User Guide
Desktop LED lamp
For more information see the extended manual online: ned.is/ltlgq4m2xx
Intended use
The Nedis LTLGQ4M2xx is a desktop LED lamp with a built-in wireless charger.
The product is intended for indoor use only.
This product is intended to be used in household and similar applications such as kitchen areas.
The product is not intended for professional use.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Main parts (image A)
- LED lamp
- Power input
- Power adaptor
- Wireless charging area
- Light mode button
- Power button
- Timer button
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Only use the provided power cable.
- Unplug the product from the power source and other equipment if problems occur.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Connecting the product
- Plug the power adaptor A3 into the power input A2.
- Plug the other end of the power adaptor A3 into a power outlet.
Using the lamp
-
Press the power button A6 to switch on the LED lamp A1.
-
Press and hold the power button A6 to change the brightness of LED lamp A1.
-
Press the light mode button A5 to cycle through the different light modes.
The light modes are Natural, Cool and Warm. -
Press the power button A6 to switch off the LED lamp A1 after use.
Using the timer
- Press and hold the timer button A7 to set a timer for 40 minutes.
The LED lamp A1 flashes twice to indicate the timer is active.
The LED lamp A1 switches off after the timer runs out.
Using the wireless charger
- Place your device on the wireless charging area A4.
Disposal
The product is designated for separate collection at an appropriate collection
point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible
for the waste management.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product LTLGQ4M2BK / LTLGQ4M2WT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is notlimited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
nedis.com/LTLGQ4M2xx#support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>