GIGABYTE H410M H V2 Ultra Durable Motherboard User Manual
- July 4, 2024
- Gigabyte
Table of Contents
GIGABYTE H410M H V2 Ultra Durable Motherboard
Specifications
- CPU: Supports 10th Gen Intel Core Processors
- Chipset: Intel H410 Express Chipset
- Memory: Dual-channel DDR4 with 2 DIMM slots, support for up to 64GB
- Graphics: Integrated Graphics Processor-Intel HD Graphics support
- Audio: Realtek ALC887 audio codec, High Definition Audio, 2/4/5.1/7.1-channel support
- LAN: Realtek GbE LAN chip (1000 Mbit/100 Mbit)
- Expansion Slots: 1 x PCI Express x16 slot, 2 x PCI Express x1 slots
- Storage Interface: 4 x SATA 6Gb/s connectors
Product Usage Instructions
Chapter 1: Hardware Installation
1-1 Installation Precautions
Prior to installation, carefully read the user’s manual and follow these procedures to prevent any damage due to electrostatic discharge (ESD).
1-2 Product Specifications
Refer to the specifications listed above for detailed information on the CPU, Chipset, Memory, Graphics, Audio, LAN, Expansion Slots, and Storage Interface.
USB and Connectors:
- USB Internal Connectors: Includes USB 3.2 Gen 1 and USB 2.0/1.1 ports
- Back Panel Connectors: Features USB ports, audio jacks, HDMI port, and more
I/O Controller Hardware Monitor:
The hardware monitor provides voltage detection, temperature detection, fan speed detection, overheating warning, fan fail warning, and fan speed control.
BIOS and Chipset:
The BIOS includes settings for USB and connectors, power connectors, fan headers, RGB LED strips, and more. The chipset supports various features for connectivity and performance.
FAQs
- Q: How do I configure the audio settings for 7.1-channel audio?
- A: To configure 7.1-channel audio, open the audio software and select Device advanced settings > Playback Device to change the default setting first. For more details, visit GIGABYTE’s website.
- Q: Are the packaging materials of this product recyclable?
- A: Yes, to reduce impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE is committed to environmental protection.
H410M H V2
User’s Manual
Rev. 1001
For more product details, please visit GIGABYTE’s website. To reduce the
impacts on global warming, the packaging materials of this product are
recyclable and reusable. GIGABYTE works with you to protect the environment.
https://tm.by –
Copyright © 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The
trademarks mentioned in this manual are legally registered to their respective
owners. Disclaimer Information in this manual is protected by copyright laws
and is the property of GIGABYTE. Changes to the specifications and features in
this manual may be made by GIGABYTE without prior notice. No part of this
manual may be reproduced, copied, translated, transmitted, or published in any
form or by any means without GIGABYTE’s prior written permission. In order to
assist in the use of this product, carefully read the User’s Manual. For
product-related information, check on our website at:
https://www.gigabyte.com Identifying Your Motherboard Revision The revision
number on your motherboard looks like this: “REV: X.X.” For example, “REV:
1.0” means the revision of the motherboard is 1.0. Check your motherboard
revision before updating motherboard BIOS, drivers, or when looking for
technical information. Example:
https://tm.by –
H410M H V2 Motherboard Layout
KB_MS SYS_FAN
ATX_12V_2X4
CPU_FAN ATX
LGA1200
VGA M2A_SB DDR4_A1 DDR4_B1
F_U32
HDMI USB20
SATA3
32 54
U32
USB_LAN
80
60
AUDIO
Intel® GbE LAN
PCIEX16
42
H410M H V2
iTE® Super I/O
CODEC
PCIEX1_1 PCIEX1_2
BAT M_BIOS
F_AUDIO
COMA LED_C SPI_TPM F_USB
Intel® H470
F_PANEL
CLR_CMOS
Box Contents 5 H410M H V2 motherboard 5 Motherboard driver disc 5 User’s Manual
5 Two SATA cables 5 I/O Shield
- The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice.
– 4 –
Chapter 1
Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components
which can become damaged as a result of electrostatic discharge (ESD). Prior
to installation, carefully read the user’s manual and follow these procedures:
· Prior to installation, make sure the chassis is suitable for the
motherboard. · Prior to installation, do not remove or break motherboard S/N
(Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for
warranty validation. · Always remove the AC power by unplugging the power cord
from the power outlet before
installing or removing the motherboard or other hardware components. · When
connecting hardware components to the internal connectors on the motherboard,
make
sure they are connected tightly and securely. · When handling the motherboard,
avoid touching any metal leads or connectors. · It is best to wear an
electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD
wrist strap, keep your hands dry and first touch a metal object to eliminate
static electricity. · Prior to installing the motherboard, please have it on
top of an antistatic pad or within an electrostatic shielding container. ·
Before connecting or unplugging the power supply cable from the motherboard,
make sure the power supply has been turned off. · Before turning on the power,
make sure the power supply voltage has been set according to the local voltage
standard. · Before using the product, please verify that all cables and power
connectors of your hardware components are connected. · To prevent damage to
the motherboard, do not allow screws to come in contact with the motherboard
circuit or its components. · Make sure there are no leftover screws or metal
components placed on the motherboard or within the computer casing. · Do not
place the computer system on an uneven surface. · Do not place the computer
system in a high-temperature or wet environment. · Turning on the computer
power during the installation process can lead to damage to system components
as well as physical harm to the user. · If you are uncertain about any
installation steps or have a problem related to the use of the product, please
consult a certified computer technician. · If you use an adapter, extension
power cable, or power strip, ensure to consult with its installation and/or
grounding instructions.
– 5 –
https://tm.by –
1-2 Product Specifications
CPU
Chipset
Memory
Onboard
Graphics
Audio
LAN
Expansion Slots
Storage Interface
Support for 10th Generation Intel® CoreTM i9 processors/Intel® CoreTM i7
processors/ Intel® CoreTM i5 processors/Intel® CoreTM i3 processors/Intel®
Pentium® processors/ Intel® Celeron® processors in the LGA1200 package (Go to
GIGABYTE’s website for the latest CPU support list.) L3 cache varies with CPU
Intel® H470 Express Chipset
Intel® CoreTM i9/i7 processors: – Support for DDR4 2933/2666/2400/2133 MHz
memory modules Intel® CoreTM i5/i3/Pentium®/Celeron® processors: – Support for
DDR4 2666/2400/2133 MHz memory modules 2 x DDR4 DIMM sockets supporting up to
64 GB (32 GB single DIMM capacity) of system memory Dual channel memory
architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules
(operate in non-ECC mode) Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16
memory modules Support for Extreme Memory Profile (XMP) memory modules (Go to
GIGABYTE’s website for the latest supported memory speeds and memory modules.)
Integrated Graphics Processor-Intel® HD Graphics support: – 1 x D-Sub port,
supporting a maximum resolution of 1920×1200@60 Hz – 1 x HDMI port, supporting
a maximum resolution of 4096×2160@30 Hz
- Support for HDMI 1.4 version and HDCP 2.3. Maximum shared memory of 512 MB
Realtek® Audio CODEC High Definition Audio 2/4/5.1/7.1-channel - To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE’s website for details on configuring the audio software.
Intel® GbE LAN chip (1 Gbit/100 Mbit)
1 x PCI Express x16 slot, running at x16 2 x PCI Express x1 slots (The PCI Express slots conform to PCI Express 3.0 standard.)
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/ x2 SSD support) 4 x SATA 6Gb/s connectors Support for RAID 0, RAID 1, RAID 5, and RAID 10 Intel® OptaneTM Memory Ready
– 6 –
https://tm.by –
USB Internal Connectors
Back Panel Connectors
I/O Controller Hardware Monitor
BIOS
Chipset:
– 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available
through
the internal USB header)
– 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 4 x SATA
6Gb/s connectors 1 x CPU fan header 1 x system fan header 1 x RGB LED strip
header 1 x front panel header 1 x front panel audio header 1 x USB 3.2 Gen 1
header 1 x USB 2.0/1.1 header 1 x Trusted Platform Module header (For the GC-
TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only) 1 x serial port header 1 x Clear CMOS jumper
1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x D-Sub port 1 x HDMI port 2 x
USB 3.2 Gen 1 ports 4 x USB 2.0/1.1 ports 1 x RJ-45 port 3 x audio jacks
iTE® I/O Controller Chip
Voltage detection Temperature detection Fan speed detection Overheating
warning Fan fail warning Fan speed control
- Whether the fan speed control function is supported will depend on the cooler you
install.
1 x 256 Mbit flash Use of licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
– 7 –
https://tm.by –
Unique Features
Bundled
Software
Operating System
Support for APP Center * Available applications in APP Center may vary by
motherboard model. Supported functions of each application may also vary
depending on motherboard specifications.
– @BIOS – Ambient LED – EasyTune – Fast Boot – Game Boost – ON/OFF Charge –
Smart Backup – System Information Viewer Support for Q-Flash Support for
Xpress Install
Norton® Internet Security (OEM version) cFosSpeed
Support for Windows 10 64-bit
Form Factor Micro ATX Form Factor; 22.6cm x 18.5cm
- GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice.
Please visit GIGABYTE’s website for support lists of CPU, memory modules,
SSDs, and M.2 devices.
– 8 –
Please visit the SupportUtility List page on GIGABYTE’s website to download the latest version of apps.
1-3 Installing the CPU
Read the following guidelines before you begin to install the CPU: · Make sure
that the motherboard supports the CPU.
(Go to GIGABYTE’s website for the latest CPU support list.)
· Always turn off the computer and unplug the power cord from the power outlet
before installing the CPU to prevent hardware damage.
· Locate the pin one of the CPU. The CPU cannot be inserted if oriented
incorrectly. (Or you may locate the notches on both sides of the CPU and
alignment keys on the CPU socket.)
· Apply an even and thin layer of thermal grease on the surface of the CPU. ·
Do not turn on the computer if the CPU cooler is not installed, otherwise
overheating and damage
of the CPU may occur.
· Set the CPU host frequency in accordance with the CPU specifications. It is
not recommended that the system bus frequency be set beyond hardware
specifications since it does not meet the standard requirements for the
peripherals. If you wish to set the frequency beyond the standard
specifications, please do so according to your hardware specifications
including the CPU, graphics card, memory, hard drive, etc.
Installing the CPU Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
LGA1200 CPU Socket
LGA1200 CPU
Alignment Key
Pin One Corner of the CPU Socket
Alignment Key
Notch
Notch
Triangle Pin One Marking on the CPU
Do not remove the CPU socket cover before inserting the CPU. It may pop off
from the load plate automatically during the process of re-engaging the lever
after you insert the CPU.
1-4 Installing the Memory
Read the following guidelines before you begin to install the memory: · Make
sure that the motherboard supports the memory. It is recommended that memory
of the same
capacity, brand, speed, and chips be used. (Go to GIGABYTE’s website for the
latest supported memory speeds and memory modules.) · Always turn off the
computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage. · Memory modules have a foolproof design. A
memory module can be installed in only one direction. If you are unable to
insert the memory, switch the direction.
Dual Channel Memory Configuration This motherboard provides two memory sockets
and supports Dual Channel Technology. After the memory is installed, the BIOS
will automatically detect the specifications and capacity of the memory.
Enabling Dual Channel memory mode will double the original memory bandwidth.
Please visit GIGABYTE’s website for details on hardware installation. – 9 –
The two DDR4 memory sockets are divided into two channels and each channel has
one memory socket as following: Channel A: DDR4_A1 Channel B: DDR4_B1 Due to
CPU limitations, read the following guidelines before installing the memory in
Dual Channel mode.
1. Dual Channel mode cannot be enabled if only one memory module is
installed. 2. When enabling Dual Channel mode with two memory modules, it is
recommended that memory of
the same capacity, brand, speed, and chips be used.
1-5 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card: ·
Make sure the motherboard supports the expansion card. Carefully read the
manual that came
with your expansion card. · Always turn off the computer and unplug the power
cord from the power outlet before installing an
expansion card to prevent hardware damage.
1-6 Back Panel Connectors
PS/2 Keyboard and PS/2 Mouse Port Use the upper port (green) to connect a PS/2
mouse and the lower port (purple) to connect a PS/2 keyboard. D-Sub Port The
D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution
of 1920×1200@60 Hz (the actual resolutions supported depend on the monitor
being used). Connect a monitor that supports D-Sub connection to this port.
HDMI Port
The HDMI port supports HDCP 2.3 and Dolby TrueHD and DTS HD Master Audio
formats. It also supports up to 192KHz/16bit 7.1-channel LPCM audio output.
You can use this port to connect your HDMI-supported monitor. The maximum
supported resolution is 4096×2160@30 Hz, but the actual resolutions supported
are dependent on the monitor being used. After installing the HDMI device,
make sure to set the default sound playback device to HDMI. (The item name may
differ depending on your operating system.)
USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specification. Use this
port for USB devices. USB 3.2 Gen 1 Port The USB 3.2 Gen 1 port supports the
USB 3.2 Gen 1 specification and is compatible to the USB 2.0 specification.
Use this port for USB devices.
· When removing the cable connected to a back panel connector, first remove
the cable from your device and then remove it from the motherboard.
· When removing the cable, pull it straight out from the connector. Do not
rock it side to side to prevent an electrical short inside the cable
connector. – 10 –
https://tm.by –
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
Connection/ Speed LED
Activity LED Connection/Speed LED:
State
Description
Orange 1 Gbps data rate
Green
100 Mbps data rate
LAN Port
Off
10 Mbps data rate
Activity LED: State Blinking On
Description Data transmission or receiving is occurring No data transmission or receiving is occurring
Line In/Rear Speaker Out (Blue) The line in jack. Use this audio jack for line
in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out (Green) The line out jack.
Mic In/Center/Subwoofer Speaker Out (Pink) The Mic in jack.
Audio Jack Configurations: Jack
Line In/Rear Speaker Out
Headphone/ 2-channel
4-channel a
5.1-channel a
7.1-channel a
Line Out/Front Speaker Out
a
a
a
a
Mic In/Center/Subwoofer Speaker Out
a
a
Front Panel Line Out/Side Speaker Out
a
· You can change the functionality of an audio jack using the audio software.
· To configure 7.1-channel audio, you need to open the audio software and
select Device
advanced settings > Playback Device to change the default setting first.
Please visit GIGABYTE’s website for details on configuring the audio software.
– 11 –
https://tm.by –
1-7 Internal Connectors
41
3
7 15
9
12 5 13 11
2 6 10
14 8
-
ATX_12V_2X4 2) ATX 3) CPU_FAN 4) SYS_FAN 5) LED_C 6) SATA3 2/3/4/5 7) M2A_SB 8) F_PANEL
-
F_AUDIO 10) F_U32 11) F_USB 12) COMA 13) SPI_TPM 14) CLR_CMOS 15) BAT
Read the following guidelines before connecting external devices: · First make
sure your devices are compliant with the connectors you wish to connect. ·
Before installing the devices, be sure to turn off the devices and your
computer. Unplug the power
cord from the power outlet to prevent damage to the devices. · After
installing the device and before turning on the computer, make sure the device
cable has
been securely attached to the connector on the motherboard.
– 12 –
1/2) ATX_12V_2X4/ATX (2×4 12V Power Connector and 2×12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed. The power connector possesses a foolproof design. Connect the power supply cable to the power connector in the correct orientation. The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the computer will not start. To meet expansion requirements, it is recommended that a power supply that can withstand high power consumption be used (500W or greater). If a power supply is used that does not provide the required power, the result can lead to an unstable or unbootable system.
5
8
1
4
ATX_12V_2X4
ATX_12V_2X4:
Pin No. Definition
Pin No.
1 GND (Only for 2×4-pin 12V) 5
2 GND (Only for 2×4-pin 12V) 6
3 GND
7
4 GND
8
Definition +12V (Only for 2×4-pin 12V) +12V (Only for 2×4-pin 12V) +12V +12V
12
24
1
13
ATX
ATX:
Pin No. Definition 1 3.3V
Pin No. Definition 13 3.3V
2 3.3V
14 -12V
3 GND
15 GND
4 +5V
16 PS_ON (soft On/Off)
5 GND
17 GND
6 +5V
18 GND
7 GND
19 GND
8 Power Good
20 NC
9 5VSB (stand by +5V)
21 +5V
10 +12V
22 +5V
11 +12V (Only for 2×12-pin 23 +5V (Only for 2×12-pin ATX) ATX)
12 3.3V (Only for 2×12-pin 24 GND (Only for 2×12-pin ATX) ATX)
3/4) CPU_FAN/SYS_FAN (Fan Headers) All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.
Connector
CPU_FAN SYS_FAN Pin No. Definition
1 GND
1
Maximum Current 2A
2A
2 Voltage Speed Control
CPU_FAN
1
Maximum Power 24W
24W
SYS_FAN
3 Sense 4 PWM Speed Control
· Be sure to connect fan cables to the fan headers to prevent your CPU and
system from overheating. Overheating may result in damage to the CPU or the
system may hang.
· These fan headers are not configuration jumper blocks. Do not place a jumper
cap on the headers.
– 13 –
- LED_C (RGB LED Strip Header) The header can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power rating of 2A (12V) and maximum length of 2m.
1
Pin No. Definition
1 12V
2G
3R
4B
RGB LED Strip
1 12V
Connect your RGB LED strip to the header. The power pin (marked with a
triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of
this header. Incorrect connection may lead to the damage
of the LED strip.
For how to turn on/off the lights of the LED strip please visit the “Unique Features” webpage of GIGABYTE’s website.
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices.
- SATA3 2/3/4/5 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA
6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel® Chipset supports RAID 0, RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, “Configuring a RAID Set,” for instructions on configuring a RAID array.
77
SATA3 32 54
11
Pin No. 1 2 3 4 5 6 7
Definition GND TXP TXN GND RXN RXP GND
To enable hot-plugging for the SATA ports, refer to Chapter 2, “BIOS Setup,” “SettingsIO Ports SATA And RST Configuration,” for more information.
– 14 –
- M2A_SB (M.2 Socket 3 Connector) The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs.
80
60
42
Follow the steps below to correctly install an M.2 SSD in the M.2 connector. Step 1: Locate the proper mounting hole for the M.2 SSD to be installed and then install the mounting clip first. Step 2: Slide the M.2 SSD into the connector at an angle. Step 3: Press the M.2 SSD down and then secure it by pressing the clip pin into the mounting hole.
- F_PANEL (Front Panel Header) Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.
Power LED Power Switch Speaker
· PLED/PWR_LED (Power LED):
System Status LED Connects to the power status indicator
PLED+ PLED-
PW+ PWSPEAK+ NC NC SPEAK-
G.QBOFM
S0
On
S3/S4/S5
Off
on the chassis front panel. The LED is on when the system is operating. The LED is off when the system is in S3/S4 sleep state
2 1
20
19 · PW (Power Switch):
or powered off (S5).
Connects to the power switch on the chassis front panel. You may
HD+ HD-
RESCI-RES+ CI+
PWR_LED+ PWR_LEDPWR_LED-
configure the way to turn off your system using the power switch
(refer to Chapter 2, “BIOS Setup,” “SettingsPlatform Power,” for more
information).
Hard Drive Reset Activity LED Switch
Power LED
Chassis Intrusion Header
· SPEAK (Speaker): Connects to the speaker on the chassis front panel. The
system reports
system startup status by issuing a beep code. One single short beep
will be heard if no problem is detected at system startup.
· HD (Hard Drive Activity LED):
Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive
is reading or writing data.
· RES (Reset Switch):
Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer
if the computer freezes and fails to perform a normal restart.
· CI (Chassis Intrusion Header):
Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has
been removed. This function requires a chassis with a chassis intrusion switch/sensor.
· NC: No connection.
The front panel design may differ by chassis. A front panel module mainly consists of power switch,
reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis
front panel module to this header, make sure the wire assignments and the pin assignments are
matched correctly.
– 15 –
- F_AUDIO (Front Panel Audio Header) The front panel audio header supports High Definition audio (HD). You may connect your chassis front panel audio module to this header. Make sure the wire assignments of the module connector match the pin assignments of the motherboard header. Incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it.
Pin No. Definition
Pin No. Definition
9
1
10
2
1 MIC2_L 2 GND
6 Sense 7 FAUDIO_JD
3 MIC2_R
8 No Pin
4 NC
9 LINE2_L
5 LINE2_R
10 Sense
Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug. For information about connecting the front panel audio module that has different wire assignments, please contact the chassis manufacturer.
- F_U32 (USB 3.2 Gen 1 Header) The header conforms to USB 3.2 Gen 1 and USB 2.0 specification and can provide two USB ports. For purchasing the optional 3.5″ front panel that provides two USB 3.2 Gen 1 ports, please contact the local dealer.
20
1
11
10
Pin No. 1 2 3 4 5 6 7 8 9 10
Definition VBUS SSRX1SSRX1+ GND SSTX1SSTX1+ GND D1D1+ NC
Pin No. 11 12 13 14 15 16 17 18 19 20
Definition D2+ D2GND SSTX2+ SSTX2GND SSRX2+ SSRX2VBUS No Pin
- F_USB (USB 2.0/1.1 Header) The header conforms to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.
Pin No. Definition
Pin No. Definition
1 Power (5V)
6 USB DY+
9
1
10
2
2 Power (5V) 3 USB DX-
7 GND 8 GND
4 USB DY-
9 No Pin
5 USB DX+
10 NC
· Do not plug the IEEE 1394 bracket (2×5-pin) cable into the USB 2.0/1.1
header. · Prior to installing the USB bracket, be sure to turn off your
computer and unplug the power cord
from the power outlet to prevent damage to the USB bracket.
– 16 –
- COMA (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer.
9
1
10
2
Pin No. 1 2 3 4 5
Definition NDCDNSIN NSOUT NDTRGND
Pin No. 6 7 8 9 10
Definition NDSRNRTSNCTSNRINo Pin
- SPI_TPM (Trusted Platform Module Header) You may connect an SPI TPM (Trusted Platform Module) to this header.
11
1
12
2
Pin No. 1 2 3 4 5 6
Definition Data Output Power (3.3V) No Pin NC Data Input CLK
Pin No. 7 8 9 10 11 12
Definition Chip Select GND IRQ NC NC RST
-
CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
Open: Normal Short: Clear CMOS Values · Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. · After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, “BIOS Setup,” for BIOS configurations).
– 17 –
https://tm.by – -
BAT (Battery) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost.
You may clear the CMOS values by removing the battery: 1. Turn off your computer and unplug the power cord. 2. Gently remove the battery from the battery holder and wait for one minute. (Or use a
metal object like a screwdriver to touch the positive and negative terminals of the battery holder, making them short for 5 seconds.) 3. Replace the battery. 4. Plug in the power cord and restart your computer. · Always turn off your computer and unplug the power cord before replacing the battery. · Replace the battery with an equivalent one. Damage to your devices may occur if the battery is replaced with an incorrect model. · Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the battery model. · When installing the battery, note the orientation of the positive side (+) and the negative side (-) of the battery (the positive side should face up). · Used batteries must be handled in accordance with local environmental regulations.
– 18 –
https://tm.by –
Chapter 2
BIOS Setup
BIOS (Basic Input and Output System) records hardware parameters of the system
in the CMOS on the motherboard. Its major functions include conducting the
Power-On Self-Test (POST) during system startup, saving system parameters and
loading operating system, etc. BIOS includes a BIOS Setup program that allows
the user to modify basic system configuration settings or to activate certain
system features. When the power is turned off, the battery on the motherboard
supplies the necessary power to the CMOS to keep the configuration values in
the CMOS. To access the BIOS Setup program, press the
and updates the BIOS. · Because BIOS flashing is potentially risky, if you do
not encounter problems using the current version of BIOS, it is recommended
that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate
BIOS flashing may result in system malfunction. · It is recommended that you
not alter the default settings (unless you need to) to prevent system
instability or other unexpected results. Inadequately altering the settings
may result in system’s failure to boot. If this occurs, try to clear the CMOS
values and reset the board to default values. (Refer to the “Load Optimized
Defaults” section in this chapter or introductions of the battery/clear CMOS
jumper in Chapter 1 for how to clear the CMOS values.)
2-1 Startup Screen
The following startup Logo screen will appear when the computer boots.
Function Keys
There are two different BIOS modes as follows and you can use the
· When the system is not stable as usual, select the Load Optimized Defaults
item to set your system to its defaults. · The BIOS Setup menus described in
this chapter are for reference only and may differ by BIOS version.
– 19 –
https://tm.by –
2-2 The Main Menu
Setup Menus
Configuration Items
System Time
Hardware Information
Option Description
Current Settings
Quick Access Bar allows you to quickly move to the General Help, Easy Mode, Smart Fan 5, or Q-Flash screen.
Advanced Mode Function Keys
Move the selection bar to select a setup menu Move the selection bar to select an configuration item on a menu
<+>/
Increase the numeric value or make changes
<->/
Show descriptions of the function keys
Switch to Easy Mode
Save the current BIOS settings to a profile
Load the BIOS settings from a profile created before
Restore the previous BIOS settings for the current submenus
Display the Smart Fan 5 screen
Load the Optimized BIOS default settings for the current submenus Access the Q-Flash utility Save all the changes and exit the BIOS Setup program
Switch to the Favorites submenu Capture the current screen as an image and save it to your USB drive Add or remove a favorite option
Display information on the installed memory Main Menu: Exit the BIOS Setup program Submenus: Exit current submenu
– 20 –
2-3 Favorites (F11)
Set your frequently used options as your favorites and use the
– 21 –
https://tm.by –
2-4 Tweaker
Whether the system will work stably with the overclock/overvoltage settings
you made is dependent on your overall system configurations. Incorrectly doing
overclock/overvoltage may result in damage to CPU, chipset, or memory and
reduce the useful life of these components. This page is for advanced users
only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings
may result in system’s failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)
& CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU.
The adjustable range is dependent on the CPU being installed.
& Ring Ratio Allows you to set the CPU Uncore ratio. The adjustable range is
dependent on the CPU being used. (Default: Auto)
& IGP Ratio (Note) Allows you to set the Graphics Ratio. (Default: Auto)
& AVX Offset (Note) AVX offset is the negative offset of AVX ratio.
Advanced CPU Settings & CPU Over Temperature Protection (Note)
Allows you to fine-tune the TJ Max offset value. (Default: Auto) & FCLK
Frequency for Early Power On
Allows you to set the FCLK frequency. Options are: Normal(800Mhz), 1GHz,
400MHz. (Default: 1GHz) & Hyper-Threading Technology
Allows you to determine whether to enable multi-threading technology when
using an Intel® CPU that supports this function. This feature only works for
operating systems that support multi-processor mode. Auto lets the BIOS
automatically configure this setting. (Default: Auto) & No. of CPU Cores
Enabled Allows you to select the number of CPU cores to enable in an Intel®
multi-core CPU (the number of CPU cores may vary by CPU). Auto lets the BIOS
automatically configure this setting. (Default: Auto) & VT-d Enables or
disables Intel® Virtualization Technology for Directed I/O. (Default: Enabled)
(Note) This item is present only when you install a CPU that supports this
feature. For more information about Intel® CPUs’ unique features, please visit
Intel’s website. – 22 –
https://tm.by –
& Intel(R) Speed Shift Technology (Intel® Speed Shift Technology) (Note)
Enables or disables Intel® Speed Shift Technology. Enabling this feature
allows the processor to ramp up its operating frequency more quickly and then
improves the system responsiveness. (Default: Enabled)
& CPU Thermal Monitor (Note) Enables or disables Intel® Thermal Monitor
function, a CPU overheating protection function. When enabled, the CPU core
frequency and voltage will be reduced when the CPU is overheated. Auto lets
the BIOS automatically configure this setting. (Default: Auto)
& Ring to Core offset (Down Bin) Allows you to determine whether to disable
the CPU Ring ratio auto-down function. Auto lets the BIOS automatically
configure this setting. (Default: Auto)
& CPU EIST Function (Note) Enables or disables Enhanced Intel® Speed Step
Technology (EIST). Depending on CPU loading, Intel® EIST technology can
dynamically and effectively lower the CPU voltage and core frequency to
decrease average power consumption and heat production. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
& Race To Halt (RTH) (Note)/Energy Efficient Turbo (Note) Enables or disables
the CPU power saving related settings.
& Voltage Optimization Allows you to determine whether to enable voltage
optimization to reduce power consumption. (Default: Auto)
& Intel(R) Turbo Boost Technology (Note) Allows you to determine whether to
enable the Intel® CPU Turbo Boost technology. Auto lets the BIOS automatically
configure this setting. (Default: Auto)
& Intel(R) Turbo Boost Max Technology 3.0 (Note) Enables or disables Intel®
Turbo Boost Max Technology 3.0. Intel® Turbo Boost Max Technology 3.0 allows
the system to identify the processor’s best performance core and lets you
manually direct the most critical workloads to it. You can even adjust the
frequency of each core individually for performance optimization. (Default:
Enabled)
& CPU Flex Ratio Override Enables or disables the CPU Flex Ratio. The maximum
CPU clock ratio will be based on the CPU Flex Ratio Settings value if CPU
Clock Ratio is set to Auto. (Default: Disabled)
& CPU Flex Ratio Settings Allows you to set the CPU Flex Ratio. The adjustable
range may vary by CPU.
& Frequency Clipping TVB (Note) Allows you to enable or disable automatic CPU
frequency reduction initiated by Thermal Velocity Boost. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
& Voltage reduction initiated TVB (Note) Allows you to enable or disable
automatic CPU voltage reduction initiated by Thermal Velocity Boost. Auto lets
the BIOS automatically configure this setting. (Default: Auto)
d Active Turbo Ratios & Turbo Ratio (1-Core Active~10-Core Active)
Allows you to set the CPU Turbo ratios for different number of active cores.
Auto sets the CPU Turbo ratios according to the CPU specifications. This item
is configurable only when Active Turbo Ratios is set to Enabled. (Default:
Auto)
(Note) This item is present only when you install a CPU that supports this
feature. For more information about Intel® CPUs’ unique features, please visit
Intel’s website.
– 23 –
https://tm.by –
d C-States Control & CPU Enhanced Halt (C1E)
Enables or disables Intel® CPU Enhanced Halt (C1E) function, a CPU power-
saving function in system halt state. When enabled, the CPU core frequency and
voltage will be reduced during system halt state to decrease power
consumption. Auto lets the BIOS automatically configure this setting. This
item is configurable only when C-States Control is set to Enabled. (Default:
Auto) & C3 State Support (Note) Allows you to determine whether to let the CPU
enter C3 mode in system halt state. When enabled, the CPU core frequency and
voltage will be reduced during system halt state to decrease power
consumption. The C3 state is a more enhanced power-saving state than C1. Auto
lets the BIOS automatically configure this setting. This item is configurable
only when C-States Control is set to Enabled. (Default: Auto) & C6/C7 State
Support (Note) Allows you to determine whether to let the CPU enter C6/C7 mode
in system halt state. When enabled, the CPU core frequency and voltage will be
reduced during system halt state to decrease power consumption. The C6/C7
state is a more enhanced power-saving state than C3. Auto lets the BIOS
automatically configure this setting. This item is configurable only when
C-States Control is set to Enabled. (Default: Auto) & C8 State Support (Note)
Allows you to determine whether to let the CPU enter C8 mode in system halt
state. When enabled, the CPU core frequency and voltage will be reduced during
system halt state to decrease power consumption. The C8 state is a more
enhanced power-saving state than C6/C7. Auto lets the BIOS automatically
configure this setting. This item is configurable only when C-States Control
is set to Enabled. (Default: Auto) & C10 State Support (Note) Allows you to
determine whether to let the CPU enter C10 mode in system halt state. When
enabled, the CPU core frequency and voltage will be reduced during system halt
state to decrease power consumption. The C10 state is a more enhanced power-
saving state than C8. Auto lets the BIOS automatically configure this setting.
This item is configurable only when C-States Control is set to Enabled.
(Default: Auto) & Package C State Limit (Note) Allows you to specify the
C-state limit for the processor. Auto lets the BIOS automatically configure
this setting. This item is configurable only when C-States Control is set to
Enabled. (Default: Auto) & CPU Power Performance (Note) Allows you to
determine whether to increase CPU performance. (Default: Auto)
d Turbo Power Limits Allows you to set a power limit for CPU Turbo mode. When
the CPU power consumption exceeds the specified power limit, the CPU will
automatically reduce the core frequency in order to reduce the power. Auto
sets the power limit according to the CPU specifications. (Default: Auto)
& Package Power Limit TDP (Watts) / Package Power Limit Time Allows you to set
the power limit for CPU Turbo mode and how long it takes to operate at the
specified power limit. If the specified value is exceeded, the CPU will
automatically reduce the core frequency in order to reduce the power. Auto
sets the power limit according to the CPU specifications. This item is
configurable only when Turbo Power Limits is set to Enabled. (Default: Auto)
& DRAM Power Limit (Watts) / DRAM Power Limit Time Allows you to set the power
limit for memory Turbo mode and how long it takes to operate at the specified
power limit. Auto lets the BIOS automatically configure this setting. This
item is configurable only when Turbo Power Limits is set to Enabled. (Default:
Auto)
(Note) This item is present only when you install a CPU that supports this
feature. For more information about Intel® CPUs’ unique features, please visit
Intel’s website.
– 24 –
https://tm.by –
& Core Current Limit (Amps) Allows you to set a current limit for CPU Turbo
mode. When the CPU current exceeds the specified current limit, the CPU will
automatically reduce the core frequency in order to reduce the current. Auto
sets the
power limit according to the CPU specifications. This item is configurable
only when Turbo Power Limits is set to Enabled. (Default: Auto)
d Turbo Per Core Limit Control (Note 1) Allows you to control each CPU core limit separately. (Default: Auto)
& Extreme Memory Profile (X.M.P.) (Note 2)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled
Disables this function. (Default)
Profile1
Uses Profile 1 settings.
Profile2 (Note 2) Uses Profile 2 settings.
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Ref Clock
Allows you to manually adjust the memory reference clock. (Default: Auto)
& Memory Odd Ratio (100/133 or 200/266)
Enabled allows Qclk to run in odd frequency. (Default: Auto)
Advanced Memory Settings
& Memory Multiplier Tweaker
Provides different levels of memory auto-tuning. (Default: Auto)
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
configure this setting. (Default: Auto)
& Memory Boot Mode
Provides memory detection and training methods.
Auto Normal
Lets the BIOS automatically configure this setting. (Default) The BIOS automatically performs memory training. Please note that if the system
becomes unstable or unbootable, try to clear the CMOS values and reset the board
to default values. (Refer to the introductions of the battery/clear CMOS jumper in
Chapter 1 for how to clear the CMOS values.)
Enable Fast Boot Skip memory detection and training in some specific criteria for faster memory
boot.
Disable Fast Boot Detect and train memory at every single boot.
(Note 1) This item is present only when you install a CPU that supports this
feature. For more information about Intel® CPUs’ unique features, please visit
Intel’s website.
(Note 2) This item is present only when you install a CPU and a memory module
that support this feature.
– 25 –
& Realtime Memory Timing Allows you to fine-tune memory timings after the BIOS
stage. (Default: Auto)
& Memory Enhancement Settings Provides several memory performance enhancement
settings: Auto, Relax OC, Enhanced Stability, Normal, Enhanced Performance,
High Frequency, High Density, and DDR-4500+. (Default: Auto)
& Memory Channel Detection Message Allows you to determine whether to show an
alert message when the memory is not installed in the optimal memory channel.
(Default: Enabled)
SPD Info Displays information on the installed memory.
Memory Channels Timing d Channels Standard Timing Control, Channels Advanced
Timing Control, Channels
Misc Timing Control These sections provide memory timing settings. Note: Your
system may become unstable or fail to boot after you make changes on the
memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
& Vcore Voltage Mode/CPU Vcore/Dynamic Vcore (DVID)/BCLK Adaptive Voltage/CPU
Graphics Voltage (VAXG)/DRAM Voltage (CH A/B) These items allow you to adjust
the CPU Vcore and memory voltages.
Advanced Voltage Settings This submenu allows you to configure Load-Line
Calibration level, over-voltage protection level, and overcurrent protection
level.
– 26 –
https://tm.by –
2-5 Settings
Platform Power
& Platform Power Management Enables or disables the Active State Power
Management function (ASPM). (Default: Disabled)
& PEG ASPM Allows you to configure the ASPM mode for the device connected to
the CPU PEG bus. This item is configurable only when Platform Power Management
is set to Enabled. (Default: Disabled)
& PCH ASPM Allows you to configure the ASPM mode for the device connected to
Chipset’s PCI Express bus. This item is configurable only when Platform Power
Management is set to Enabled. (Default: Disabled)
& DMI ASPM Allows you to configure the ASPM mode for both CPU side and Chipset
side of the DMI link. This item is configurable only when Platform Power
Management is set to Enabled. (Default: Disabled)
& Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled
Disables this function. (Default)
Password Set a password with 1~5 characters to turn on the system.
Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.
Any Key
Press any key to turn on the system.
& Power On Password
Set the password when Power On By Keyboard is set to Password.
Press
To turn on the system, enter the password and press
Note: To cancel the password, press
again without entering the password to clear the password settings.
& Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled
Disables this function. (Default)
Move
Move the mouse to turn on the system.
Double Click Double click on left button on the mouse to turn on the system.
– 27 –
& ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: Resume by Alarm,
power on by mouse, and power on by keyboard.
& Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off Press the power button and then the system will be turned off instantly. (Default) Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
& Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specific time on each day or on a specific day in a month. Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& Power Loading
Enables or disables dummy load. When the power supply is at low load, a self- protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically configure this
setting. (Default: Auto)
& RC6(Render Standby)
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power
consumption. (Default: Enabled)
& AC BACK
Determines the state of the system after the return of power from an AC power loss.
Memory
The system returns to its last known awake state upon the return of the AC power.
Always On The system is turned on upon the return of the AC power.
Always Off The system stays off upon the return of the AC power. (Default)
IO Ports
& Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGFX (Note) PCIe 1 Slot
Sets the onboard graphics as the first display. Sets the graphics card on the PCIEX16 slot as the first display. (Default)
This item is configurable only when CSM Support is set to Enabled.
& Internal Graphics
Enables or disables the onboard graphics function. (Default: Auto)
& DVMT Pre-Allocated
Allows you to set the onboard graphics memory size. (Default: 64M)
& DVMT Total Gfx Mem
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: 256M)
& Aperture Size
Allows you to set the maximum amount of system memory that can be allocated to the graphics card.
Options are: 128MB, 256MB, 512MB, 1024MB, and 2048MB. (Default: 256MB)
(Note) This item is present only when you install a CPU that supports this feature. – 28 –
& Audio Controller Enables or disables the onboard audio function. (Default:
Enabled) If you wish to install a 3rd party add-in audio card instead of using
the onboard audio, set this item to Disabled.
& Above 4G Decoding Enables or disables 64-bit capable devices to be decoded
in above 4 GB address space (only if your system supports 64-bit PCI
decoding). Set to Enabled if more than one advanced graphics card are
installed and their drivers are not able to be launched when entering the
operating system (because of the limited 4 GB memory address space). (Default:
Disabled)
& PCH LAN Controller Enables or disables the onboard LAN function. (Default:
Enabled) If you wish to install a 3rd party add-in network card instead of
using the onboard LAN, set this item to Disabled.
& Wake on LAN Enable Enables or disables the wake on LAN function. (Default:
Enabled)
& IOAPIC 24-119 Entries Enables or disables this function. (Default: Enabled)
Super IO Configuration & Serial Port
Enables or disables the onboard serial port. (Default: Enabled) USB
Configuration & Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) & XHCI
Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system
without XHCI Hand-off support. (Default: Enabled) & USB Mass Storage Driver
Support Enables or disables support for USB storage devices. (Default:
Enabled) & Mass Storage Devices Displays a list of connected USB mass storage
devices. This item appears only when a USB storage device is installed.
Network Stack Configuration & Network Stack Disables or enables booting from
the network to install a GPT format OS, such as installing the OS from the
Windows Deployment Services server. (Default: Disabled) & IPv4 PXE Support
Enables or disables IPv4 PXE Support. This item is configurable only when
Network Stack is enabled. & IPv4 HTTP Support Enables or disables HTTP boot
support for IPv4. This item is configurable only when Network Stack is
enabled. & IPv6 PXE Support Enables or disables IPv6 PXE Support. This item is
configurable only when Network Stack is enabled. & IPv6 HTTP Support Enables
or disables HTTP boot support for IPv6. This item is configurable only when
Network Stack is enabled. & PXE boot wait time Allows you to configure how
long to wait before you can press
– 29 –
https://tm.by –
& Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only when
Network Stack is enabled. (Default: 1)
NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
SATA And RST Configuration
& SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
Intel RST Premium With Intel Optane System Acceleration
Enables RAID for the SATA controller.
AHCI
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Disabled)
& Port 2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& Configured as eSATA
Enables or disables support for external SATA devices.
EZ RAID
Allows you to quickly set up a RAID array. Refer to Chapter 3, “Configuring a RAID Set,” for instructions
on configuring a RAID array.
Intel(R) Ethernet Connection
This sub-menu provides information on LAN configuration and related configuration options.
Miscellaneous
& LEDs in System Power On State
Allows you to enable or disable motherboard LED lighting when the system is on.
Off
Disables the selected lighting mode when the system is on.
On
Enables the selected lighting mode when the system is on. (Default)
& Intel Platform Trust Technology (PTT)
Enables or disables Intel® PTT Technology. (Default: Disabled)
& Software Guard Extensions (SGX)
Enables or disables the Intel® Software Guard Extensions technology. This feature allows legal software
to operate in a safe environment and protects the software against attacks from malicious software. The
Software Controlled option allows you to enable or disable this feature with an Intel-provided application.
(Default: Software Controlled)
& Max Link Speed
Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation
mode is subject to the hardware specification of each slot. Auto lets the BIOS automatically configure this
setting. (Default: Auto)
& 3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
– 30 –
Trusted Computing
Enables or disables Trusted Platform Module (TPM).
PC Health Status
& Reset Case Open Status
Disabled Enabled
Keeps or clears the record of previous chassis intrusion status. (Default) Clears the record of previous chassis intrusion status and the Case Open field will
show “No” at next boot.
& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show “Yes”, otherwise it will show “No”. To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& CPU Vcore/CPU VCCSA/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/CPU VAXG
Displays the current system voltages.
Smart Fan 5
& Monitor
Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)
& Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal
Allows the fan to run at different speeds according to the temperature. You can adjust
the fan speed with System Information Viewer based on your system requirements.
Silent
(Default) Allows the fan to run at slow speeds.
Manual
Allows you to control the fan speed in the curve graph.
Full Speed Allows the fan to run at full speeds.
& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control.
& Temperature Interval
Allows you to select the temperature interval for fan speed change.
& FanControl Mode
Auto
Lets the BIOS automatically detect the type of fan installed and sets the optimal control
Voltage
mode. (Default) Voltage mode is recommended for a 3-pin fan.
PWM
PWM mode is recommended for a 4-pin fan.
& Fan Stop
Enables or disables the fan stop function. You can set the temperature limit using the temperature curve.
The fan stops operation when the temperature is lower than the limit. (Default: Disabled)
& Temperature
Displays the current temperature of the selected target area.
& Fan Speed
Displays current fan speeds.
& Temperature Warning Control
Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit
warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF.
& Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or
fan connection when this occurs. (Default: Disabled)
– 31 –
2-6 System Info.
This section provides information on your motherboard model and BIOS version.
You can also select the default language used by the BIOS and manually set the
system time. & Access Level
Displays the current access level depending on the type of password protection
used. (If no password is set, the default will display as Administrator.) The
Administrator level allows you to make changes to all BIOS settings; the User
level only allows you to make changes to certain BIOS settings but not all. &
System Language Selects the default language used by the BIOS. & System Date
Sets the system date. The date format is week (read-only), month, date, and
year. Use
– 32 –
https://tm.by –
2-7 Boot
& Bootup NumLock State Enables or disables Numlock feature on the numeric
keypad of the keyboard after the POST. (Default: On)
& Security Option Specifies whether a password is required every time the
system boots, or only when you enter BIOS Setup. After configuring this item,
set the password(s) under the Administrator Password/User Password item. Setup
A password is only required for entering the BIOS Setup program. System A
password is required for booting the system and for entering the BIOS Setup
program. (Default)
& Full Screen LOGO Show Allows you to determine whether to display the
GIGABYTE Logo at system startup. Disabled skips the GIGABYTE Logo when the
system starts up. (Default: Enabled)
& Boot Option Priorities Specifies the overall boot order from the available
devices. Removable storage devices that support GPT format will be prefixed
with “UEFI:” string on the boot device list. To boot from an operating system
that supports GPT partitioning, select the device prefixed with “UEFI:”
string. Or if you want to install an operating system that supports GPT
partitioning such as Windows 10 64-bit,
select the optical drive that contains the Windows 10 64-bit installation disc
and is prefixed with “UEFI:” string.
& Fast Boot
Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup
speed. (Default: Disable Link)
& SATA Support
Last Boot SATA Devices Only Except for the previous boot drive, all SATA devices are disabled
before the OS boot process completes. (Default)
All SATA Devices All SATA devices are functional in the operating system and during the POST.
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.
& VGA Support
Allows you to select which type of operating system to boot.
Auto
Enables legacy option ROM only.
EFI Driver
Enables EFI option ROM. (Default)
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.
– 33 –
& USB Support
Disable Link
All USB devices are disabled before the OS boot process completes.
Full Initial
All USB devices are functional in the operating system and during the POST.
(Default)
Partial Initial
Part of the USB devices are disabled before the OS boot process completes.
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast. This function is disabled
when Fast Boot is set to Ultra Fast.
& PS2 Devices Support
Disable Link
All PS/2 devices are disabled before the OS boot process completes.
Enabled
All PS/2 devices are functional in the operating system and during the POST.
(Default)
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast. This function is disabled
when Fast Boot is set to Ultra Fast.
& NetWork Stack Driver Support
Disable Link
Disables booting from the network. (Default)
Enabled
Enables booting from the network.
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.
& Next Boot After AC Power Loss
Normal Boot
Enables normal bootup upon the return of the AC power. (Default)
Fast Boot
Keeps the Fast Boot settings upon the return of the AC power.
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.
& Mouse Speed Allows you to set the mouse cursor movement speed. (Default: 1 X)
& Windows 10 Features
Allows you to select the operating system to be installed. (Default: Windows 10)
& CSM Support
Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.
Disabled
Disables UEFI CSM and supports UEFI BIOS boot process only. (Default)
Enabled
Enables UEFI CSM.
& LAN PXE Boot Option ROM
Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)
This item is configurable only when CSM Support is set to Enabled.
& Storage Boot Option Control
Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.
Do not launch
Disables option ROM.
UEFI
Enables UEFI option ROM only.
Legacy
Enables legacy option ROM only. (Default)
This item is configurable only when CSM Support is set to Enabled.
& Other PCI devices
Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other
than the LAN, storage device, and graphics controllers.
Do not launch
Disables option ROM.
UEFI
Enables UEFI option ROM only. (Default)
Legacy
Enables legacy option ROM only.
This item is configurable only when CSM Support is set to Enabled.
– 34 –
& Administrator Password Allows you to configure an administrator password.
Press
2-8 Save & Exit
& Save & Exit Setup Press
& Exit Without Saving Press
& Load Optimized Defaults Press
& Boot Override Allows you to select a device to boot immediately. Press
Chapter 3
Appendix
3-1 Configuring a RAID Set
RAID Levels
Minimum Number of Hard Drives Array Capacity
Fault Tolerance
RAID 0
2
Number of hard drives * Size of the
smallest drive No
RAID 1
2
Size of the smallest drive
Yes
RAID 5
RAID 10
3
4
(Number of hard drives -1) * Size of the smallest drive
Yes
(Number of hard drives/2) * Size of the
smallest drive
Yes
Before you begin, please prepare the following items: · At least two SATA hard
drives or SSDs. (Note 1) (To ensure optimal performance, it is recommended
that you
use two hard drives with identical model and capacity). (Note 2)
· Windows setup disc. · Motherboard driver disc. · A USB thumb drive.
Configuring the Onboard SATA Controller
A. Installing SATA hard drive(s) in your computer Install the hard drives/SSDs
in the Intel® Chipset controlled connectors on the motherboard. Then connect
the power connectors from your power supply to the hard drives.
B. Configuring SATA controller mode in BIOS Setup Make sure to configure the
SATA controller mode correctly in system BIOS Setup. Steps: 1. Turn on your
computer and press
to SettingsIO PortsSATA And RST Configuration, make sure SATA Controller(s) is
enabled. To create RAID, set SATA Mode Selection to Intel RST Premium With
Intel Optane System Acceleration. Then save the settings and restart your
computer. Note: When using a PCIe SSD, make sure to set the Use RST Legacy
OROM item under SettingsIO PortsSATA And RST Configuration to Disabled and RST
Control PCIe Storage Devices to Manual. Then depending the M.2 connector you
use, set the corresponding PCIe Storage Dev On Port XX item to RST Controlled.
Finally, save the settings and exit BIOS Setup. If you want
to use NVMe PCIe SSDs to configure RAID, make sure to set NVMe RAID mode to
Enabled. 2. To use the EZ RAID feature, follow the steps in “C-1.” To
configure UEFI RAID, follow the steps in “C-2.” To
enter the legacy RAID ROM, refer to “C-3” for more information. Finally, save
the settings and exit BIOS Setup.
The BIOS Setup menus described in this section may differ from the exact
settings for your motherboard. The actual BIOS Setup menu options you will see
shall depend on the motherboard you have and the BIOS version.
C-1. Using EZ RAID GIGABYTE motherboards provide you with the EZ RAID feature, allowing you to quickly configure a RAID array with simplified steps. Steps:
- After restarting the computer, enter the BIOS Setup and go to Settings.
Press
on the EZ RAID item.
Select the type of hard drives you use for RAID in the Type tab and then press. 2. Go to the Mode tab to select a RAID level. RAID levels supported include RAID 0, RAID 1, RAID 10, and RAID 5 (the selections available depend on the number of the hard drives being installed). Then press to move to the Create tab. Click Proceed to begin. (Note 1) An M.2 PCIe SSD cannot be used to set up a RAID set either with an M.2 SATA SSD or a SATA hard drive. (Note 2) Refer to “Internal Connectors” for the installation notices for the M.2 and SATA connectors. – 37 –
3. After completing, you’ll be brought back to the Intel(R) Rapid Storage
Technology screen. Under RAID Volumes you can see the new RAID volume. To see
more detailed information, press
C-2. UEFI RAID Configuration Steps: 1. In BIOS Setup, go to Boot and set CSM
Support to Disabled. Save the changes and exit BIOS Setup. 2. After the system
reboot, enter BIOS Setup again. Then enter the SettingsIO PortsIntel(R) Rapid
Storage
Technology sub-menu. 3. On the Intel(R) Rapid Storage Technology menu, press
Install the RAID driver and operating system
With the correct BIOS settings, you are ready to install the operating system.
Installing the Operating System As some operating systems already include
Intel® RAID driver, you do not need to install separate RAID driver during the
Windows installation process. After the operating system is installed, we
recommend that you install all required drivers from the motherboard driver
disc using “Xpress Install” to ensure system performance and compatibility. If
the operating system to be installed requires that you provide additional RAID
driver during the OS installation process, please refer to the steps below: 1.
Copy the IRST folder under Boot in the driver disc to your USB thumb drive. 2.
Boot from the Windows setup disc and perform standard OS installation steps.
When the screen requesting
you to load the driver appears, select Browse. 3. Then browse to the USB flash
drive and select the location of the driver. The location of the driver is as
follows: IRSTf6flpy-x64 4. When a screen as shown, select Intel(R) Chipset
SATA/PCIe RST Premium Controller and click Next to
load the driver and continue the OS installation.
3-2 Installing an Intel® OptaneTM Memory
System Requirements 1. Intel® OptaneTM memory 2. The OptaneTM memory must have
at least 16 GB capacity, and it must have equal or smaller capacity than
the hard drive/SSD to be accelerated. 3. The OptaneTM memory cannot be used to
accelerate an existing RAID array; the accelerated hard drive/SSD
cannot be included in a RAID array. 4. The hard drive/SSD to be accelerated
must be a SATA hard drive or M.2 SATA SSD. 5. The hard drive/SSD to be
accelerated can be a system drive or data drive. The system drive must be GPT
formatted and have Windows 10 64-bit (or later version) installed on it. The
data drive must also be GPT formatted. 6. The motherboard driver disc
Installation Guidelines A-1: Installation in AHCI mode If the SATA controller
has been configured in AHCI mode, please follow the steps below: 1. After
entering the operating system, insert the motherboard driver disc into your
optical drive. On the Xpress
Install screen, select Intel(R) Optane(TM) Memory System Acceleration (Note)
to install. Follow the on-screen instructions to continue. When completed,
restart the system. 2. After re-entering the operating system, follow the on-
screen instructions to complete the settings, and then the Intel® OptaneTM
Memory application will appear automatically. If you install more than one
OptaneTM memory, please select which one you are going to use. Then select
which drive to be accelerated. Click Enable. All data on the OptaneTM memory
will be erased. Make sure you back up the data before continuing. Follow the
on-screen instructions to proceed. When completed, restart the system. 3.
Launch the Intel® OptaneTM Memory application from the Start menu and make
sure the Intel® OptaneTM Memory has been enabled. (The SATA controller mode is
changed to Intel RST Premium With Intel Optane System Acceleration from AHCI
mode. DO NOT change your SATA controller mode back to AHCI. Doing so will
cause the OptaneTM memory unable to function properly.) 4. If you want to
accelerate the system drive, you can select specific folders, files, or
applications to accelerate using the Intel® OptaneTM Memory Pinning function.
(The OptaneTM memory used must have at least 32 GB capacity.)
(Note) If the system already has Intel® Rapid Storage Technology utility
installed, you have to remove it first before installing the Intel(R)
Optane(TM) Memory System Acceleration application.
– 39 –
https://tm.by –
A-2: Installation in Intel RST Premium With Intel Optane System Acceleration
mode If the SATA controller has been configured in Intel RST Premium With
Intel Optane System Acceleration mode, please follow the steps below: 1. After
system restarts, go to the BIOS Setup, make sure CSM Support under the Boot
menu is disabled. 2. Go to SettingsIO PortsSATA And RST Configuration and make
sure USE RST Legacy OROM is disabled
and RST Control PCIe Storage Devices is set to Manual. If you want to enable
the OptaneTM memory installed in the M2A_SB connector, set PCIe Storage Device
On Port 9 to RST Controlled. 3. Enter the operating system, launch the Intel®
Rapid Storage Technology utility from the Start menu, and then enable Intel®
OptaneTM Memory on the Intel® OptaneTM Memory screen. 4. If you install more
than one OptaneTM memory, please select which one you are going to use. Then
select which drive to be accelerated. Click Enable. Follow the on-screen
instructions to proceed. When completed, restart the system. 5. Launch the
Intel® Rapid Storage Technology utility from the Start menu and make sure the
Intel® OptaneTM Memory has been enabled. If you want to accelerate the system
drive, you can select specific folders, files, or applications to accelerate
using the Intel® OptaneTM Memory Pinning function. (The OptaneTM memory used
must have at least 32 GB capacity.)
· An OptaneTM memory cannot be used to accelerate an M.2 PCIe SSD. · If more
than one OptaneTM memory is installed, you can select only one of them to
accelerate your
SATA-based boot drive. The other(s) can only be used as data drive(s). · Do
not abruptly remove the OptaneTM memory. Doing so will cause the operating
system to stop
functioning correctly. · If you want to change/remove the OptaneTM memory, you
must disable it using the Intel® Rapid
Storage Technology or Intel(R) OptaneTM Memory application first. · After
enabling the OptaneTM memory, the related BIOS settings will remain even after
a BIOS update.
– 40 –
https://tm.by –
3-3 Drivers Installation
· Before installing the drivers, first install the operating system. · After
installing the operating system, insert the motherboard driver disc into your
optical drive. Click
on the message “Tap to choose what happens with this disc” on the top-right
corner of the screen and select “Run Run.exe.” (Or go to My Computer, double-
click the optical drive and execute the Run.exe program.)
“Xpress Install” will automatically scan your system and then list all of the drivers that are recommended to
install. You can click the Xpress Install button and “Xpress Install” will install all of the selected drivers. Or click
the arrow
icon to individually install the drivers you need.
Please visit GIGABYTE’s website for more software information.
– 41 –
Please visit GIGABYTE’s website for more troubleshooting information.
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Product Name: Motherboard Trade Name: GIGABYTE Model Number: H410M H V2
Responsible Party U.S. Contact Information: G.B.T. Inc. Address: 17358
Railroad street, City Of Industry, CA91748 Tel.:
1-626-854-9338 Internet contact
information: https://www.gigabyte.com
FCC Compliance Statement: This device complies with Part 15 of the FCC Rules,
Subpart B, Unintentional Radiators. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: · Reorient or relocate
the receiving antenna. · Increase the separation between the equipment and
receiver. · Connect the equipment to an outlet on a circuit different from
that to
which the receiver is connected. · Consult the dealer or an experienced
radio/TV technician for help.
Canadian Department of Communications Statement This digital apparatus does
not exceed the Class B limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of
Communications. This class B digital apparatus complies with Canadian
ICES-003.
Avis de conformité à la réglementation d’Industrie Canada Cet appareil
numérique de la classe B est conforme à la norme NMB003 du Canada.
European Union (EU) CE Declaration of Conformity This device complies with the
following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-
voltage Directive 2014/35/ EU, RoHS directive (recast) 2011/65/EU & the
2015/863 Statement. This product has been tested and found to comply with all
essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European
Commission Delegated Directive (EU) 2015/863 Statement GIGABYTE products have
not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6,
PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and components have been
carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are
continuing our efforts to develop products that do not use internationally
banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE)
Directive Statement GIGABYTE will fulfill the national laws as interpreted
from the 2012/19/ EU WEEE (Waste Electrical and Electronic Equipment) (recast)
directive. The WEEE Directive specifies the treatment, collection, recycling
and disposal of electric and electronic devices and their components. Under
the Directive, used equipment must be marked, collected separately, and
disposed of properly.
WEEE Symbol Statement The symbol shown below is on the product or on its
packaging, which indicates that this product must not be disposed of with
other waste. Instead, the device should be taken to the waste collection
centers for activation of the treatment, collection, recycling and disposal
procedure.
For more information about where you can drop off your waste equipment for
recycling, please contact your local government office, your household waste
disposal service or where you purchased the product for details of
environmentally safe recycling.
End of Life Directives-Recycling The symbol shown below is on the product or
on its packaging, which indicates that this product must not be disposed of
with other waste. Instead, the device should be taken to the waste collection
centers for activation of the treatment, collection, recycling and disposal
procedure.
Déclaration de Conformité aux Directives de l’Union européenne (UE) Cet
appareil portant la marque CE est conforme aux directives de l’UE suivantes:
directive Compatibilité Electromagnétique 2014/30/UE, directive Basse Tension
2014/35/UE et directive RoHS II 2011/65/UE. La conformité à ces directives est
évaluée sur la base des normes européennes harmonisées applicables.
European Union (EU) CE-Konformitätserklärung Dieses Produkte mit CE-
Kennzeichnung erfüllen folgenden EU-Richtlinien: EMV-Richtlinie 2014/30/EU,
Niederspannungsrichtlinie 2014/30/EU und RoHS-Richtlinie 2011/65/EU erfüllt.
Die Konformität mit diesen Richtlinien wird unter Verwendung der
entsprechenden Standards zurEuropäischen Normierung beurteilt.
CE declaração de conformidade Este produto com a marcação CE estão em
conformidade com das seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU;
Diretiva CEM 2014/30/EU; Diretiva RSP 2011/65/UE. A conformidade com estas
diretivas é verificada utilizando as normas europeias harmonizadas.
CE Declaración de conformidad Este producto que llevan la marca CE cumplen con
las siguientes Directivas de la Unión Europea: Directiva EMC (2014/30/EU),
Directiva de bajo voltaje (2014/35/EU), Directiva RoHS (recast) (2011/65/EU).
El cumplimiento de estas directivas se evalúa mediante las normas europeas
armonizadas.
Dichiarazione di conformità CE Questo prodotto è conforme alle seguenti
direttive: Direttiva sulla compatibilità elettromagnetica 2014/30/UE,
Direttiva sulla bassa tensione 2014/35/UE, Direttiva RoHS (rifusione)
2011/65/UE. Questo prodotto è stato testato e trovato conforme a tutti i
requisiti essenziali delle Direttive.
– 42 –
Contact Us
GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New
Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and
Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com WEB
address (English): https://www.gigabyte.com WEB address (Chinese):
https://www.gigabyte.com/tw
· GIGABYTE eSupport To submit a technical or non-technical (Sales/Marketing)
question, please link to: https://esupport.gigabyte.com
– 43 –
https://tm.by –
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>